Benchmark #51492 - pibenchmarks.com

Brand: SanDisk SD Extreme A2 (SF128)
A2 C10 V30 U3
#220 / 1,700
79
#1,143 / 1,700
#57 / 404
1,718
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-10-20 15:04:55
#51,492
1,389
-329 (-23.69%)
Anonymous
Sandisk SD card Pi 4

Secure Digital (SD) Card Details
SanDisk SD Extreme A2 (SF128)
A2 C10 V30 U3
118.9G
SD
SanDisk
SF128
SDXC
6.00
0x03
SD
8.0
11/2019
Class 10
A2
U3
V30

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
ARMv7 v7l
4
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
35.6 MB/s
38.46 MB/s
35.27 MB/s
1,130 IOPS
3,052 IOPS
4,522 KB/s
12,208 KB/s
8,838 KB/s
2,279 KB/s
7,375 KB/s
3,899 KB/s

inxi Results
perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LC_TERMINAL = "iTerm2", LC_CTYPE = "UTF-8", LANG = "en_GB.UTF-8" are supported and installed on your system. perl: warning: Falling back to a fallback locale ("en_GB.UTF-8"). System: Host: raspberrypi4-silent Kernel: 5.10.60-v7l+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=97709164-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory Console: pty pts/0 DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2711 rev: c03112 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.82 GiB used: 374.8 MiB (9.6%) gpu: 76 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 3 bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 800 2: 800 3: 800 4: 800 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: X.org 1.20.4 driver: loaded: fbdev unloaded: modesetting tty: 142x85 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.60-v7l+ running: yes Sound Server-2: JACK v: 1.9.12 running: no Sound Server-3: PulseAudio v: 12.2 running: no Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: down mac: XX:XX:XX:XX:XX:XX Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v4: 192.168.X.X/32 scope: global IP v6: 2a02:aa12:4580:4780:470f:c01b:df1b:e5f1/64 type: dynamic mngtmpaddr noprefixroute scope: global IP v6: fe80::6f2b:b9e8:ea00:d43c/64 scope: link IF-ID-1: br-7dc2bc643641 state: down mac: XX:XX:XX:XX:XX:XX IP v4: 172.19.X.X/16 scope: global broadcast: 172.19.X.X IF-ID-2: docker0 state: down mac: XX:XX:XX:XX:XX:XX IP v4: 172.17.X.X/16 scope: global broadcast: 172.17.X.X IF-ID-3: docker_gwbridge state: down mac: XX:XX:XX:XX:XX:XX IP v4: 172.18.X.X/16 scope: global broadcast: 172.18.X.X WAN IP: 31.10.X.X Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: XX:XX:XX:XX:XX:XX bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept service-classes: capturing, telephony Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 233.69 GiB used: 8.11 GiB (3.5%) ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: Swissbit model: SF128 size: 119.08 GiB block-size: physical: 512 B logical: 512 B type: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/sda maj-min: 8:0 type: USB vendor: SanDisk model: Ultra USB 3.0 size: 114.61 GiB block-size: physical: 512 B logical: 512 B type: N/A rev: 1.00 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No optical or floppy data found. Partition: ID-1: / raw-size: 118.83 GiB size: 116.92 GiB (98.39%) used: 8.06 GiB (6.9%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 49 MiB (19.4%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: 9969-E3D2 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/sda1 maj-min: 8:1 size: 114.61 GiB fs: vfat label: N/A uuid: D2EA-7C7B USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-2:2 info: SanDisk Ultra Flair type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.2 speed: 5 Gb/s power: 896mA chip-ID: 0781:5591 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 2096 lib: 954 Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/download_docker_com_linux_raspbian.list 1: deb [arch=armhf] https://download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/vscode.list 1: deb [arch=amd64,arm64,armhf] http://packages.microsoft.com/repos/code stable main Processes: CPU top: 5 of 147 1: cpu: 1.0% command: [kworker/u8:1-events_unbound] pid: 30828 mem: 0.00 MiB (0.0%) 2: cpu: 0.2% command: [ksoftirqd/3] pid: 27 mem: 0.00 MiB (0.0%) 3: cpu: 0.2% command: packagekitd pid: 30802 mem: 12.4 MiB (0.3%) 4: cpu: 0.1% command: init pid: 1 mem: 8.14 MiB (0.2%) 5: cpu: 0.1% command: [ksoftirqd/0] pid: 11 mem: 0.00 MiB (0.0%) Memory top: 5 of 147 1: mem: 58.8 MiB (1.5%) command: dockerd pid: 1038 cpu: 0.0% 2: mem: 32.7 MiB (0.8%) command: containerd pid: 497 cpu: 0.0% 3: mem: 17.0 MiB (0.4%) command: unattended-upgrade-shutdown started by: python3 pid: 495 cpu: 0.0% 4: mem: 12.4 MiB (0.3%) command: packagekitd pid: 30802 cpu: 0.2% 5: mem: 9.58 MiB (0.2%) command: node_exporter pid: 1264 cpu: 0.0% Info: Processes: 147 Uptime: 1h 22m Init: systemd v: 241 runlevel: 5 target: graphical.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Shell: Bash (sudo) v: 5.0.3 running-in: pty pts/0 (SSH) inxi: 3.3.07

inxi Results

perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
	LANGUAGE = (unset),
	LC_ALL = (unset),
	LC_TERMINAL = "iTerm2",
	LC_CTYPE = "UTF-8",
	LANG = "en_GB.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_GB.UTF-8").
System:    Host: raspberrypi4-silent Kernel: 5.10.60-v7l+ armv7l bits: 32 compiler: N/A
           parameters: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200
           console=tty1 root=PARTUUID=97709164-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash
           plymouth.ignore-serial-consoles cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory
           Console: pty pts/0 DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster)
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2711 rev: c03112 Battery:   Message: No system battery data found. Is one present?
Memory:    RAM: total: 3.82 GiB used: 374.8 MiB (9.6%) gpu: 76 MiB
           RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots: ARM: No ARM data found for this feature.
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 3
           bogomips: 1080
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 800 2: 800 3: 800 4: 800
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4
           Vulnerabilities: No CPU vulnerability/bugs data available.
Graphics:  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Display: server: X.org 1.20.4 driver: loaded: fbdev unloaded: modesetting tty: 142x85
           Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Sound Server-1: ALSA v: k5.10.60-v7l+ running: yes
           Sound Server-2: JACK v: 1.9.12 running: no
           Sound Server-3: PulseAudio v: 12.2 running: no
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr
           IF: wlan0 state: down mac: XX:XX:XX:XX:XX:XX
           Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
           IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X
           IP v4: 192.168.X.X/32 scope: global
           IP v6: 2a02:aa12:4580:4780:470f:c01b:df1b:e5f1/64 type: dynamic mngtmpaddr noprefixroute scope: global
           IP v6: fe80::6f2b:b9e8:ea00:d43c/64 scope: link
           IF-ID-1: br-7dc2bc643641 state: down mac: XX:XX:XX:XX:XX:XX
           IP v4: 172.19.X.X/16 scope: global broadcast: 172.19.X.X
           IF-ID-2: docker0 state: down mac: XX:XX:XX:XX:XX:XX
           IP v4: 172.17.X.X/16 scope: global broadcast: 172.17.X.X
           IF-ID-3: docker_gwbridge state: down mac: XX:XX:XX:XX:XX:XX
           IP v4: 172.18.X.X/16 scope: global broadcast: 172.18.X.X
           WAN IP: 31.10.X.X
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
           Report: hciconfig ID: hci0 rfk-id: 1 state: up address: XX:XX:XX:XX:XX:XX bt-v: 3.0 lmp-v: 5.0 sub-v: 6119
           hci-v: 5.0 rev: 156
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept
           service-classes: capturing, telephony
Logical:   Message: No logical block device data found.
RAID:      Message: No RAID data found.
Drives:    Local Storage: total: 233.69 GiB used: 8.11 GiB (3.5%)
           ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: Swissbit model: SF128 size: 119.08 GiB block-size: physical: 512 B
           logical: 512 B type: SSD scheme: MBR
           SMART Message: Unknown smartctl error. Unable to generate data.
           ID-2: /dev/sda maj-min: 8:0 type: USB vendor: SanDisk model: Ultra USB 3.0 size: 114.61 GiB block-size:
           physical: 512 B logical: 512 B type: N/A
                      rev: 1.00 scheme: MBR
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
           Message: No optical or floppy data found.
Partition: ID-1: / raw-size: 118.83 GiB size: 116.92 GiB (98.39%) used: 8.06 GiB (6.9%) fs: ext4 block-size: 4096 B
           dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 49 MiB (19.4%) fs: vfat block-size: 512 B
           dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: 9969-E3D2
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
           ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap
Unmounted: ID-1: /dev/sda1 maj-min: 8:1 size: 114.61 GiB fs: vfat label: N/A uuid: D2EA-7C7B
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900
           Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900
           Device-1: 2-2:2 info: SanDisk Ultra Flair type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.2
           speed: 5 Gb/s power: 896mA chip-ID: 0781:5591 class-ID: 0806
           Sensors:   Missing: Required tool sensors not installed. Check --recommends
Repos:     Packages: apt: 2096 lib: 954
           Active apt repos in: /etc/apt/sources.list
           1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/download_docker_com_linux_raspbian.list
           1: deb [arch=armhf] https://download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list
           1: deb http://archive.raspberrypi.org/debian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/vscode.list
           1: deb [arch=amd64,arm64,armhf] http://packages.microsoft.com/repos/code stable main
Processes: CPU top: 5 of 147
           1: cpu: 1.0% command: [kworker/u8:1-events_unbound] pid: 30828 mem: 0.00 MiB (0.0%)
           2: cpu: 0.2% command: [ksoftirqd/3] pid: 27 mem: 0.00 MiB (0.0%)
           3: cpu: 0.2% command: packagekitd pid: 30802 mem: 12.4 MiB (0.3%)
           4: cpu: 0.1% command: init pid: 1 mem: 8.14 MiB (0.2%)
           5: cpu: 0.1% command: [ksoftirqd/0] pid: 11 mem: 0.00 MiB (0.0%)
           Memory top: 5 of 147
           1: mem: 58.8 MiB (1.5%) command: dockerd pid: 1038 cpu: 0.0%
           2: mem: 32.7 MiB (0.8%) command: containerd pid: 497 cpu: 0.0%
           3: mem: 17.0 MiB (0.4%) command: unattended-upgrade-shutdown started by: python3 pid: 495 cpu: 0.0%
           4: mem: 12.4 MiB (0.3%) command: packagekitd pid: 30802 cpu: 0.2%
           5: mem: 9.58 MiB (0.2%) command: node_exporter pid: 1264 cpu: 0.0%
Info:      Processes: 147 Uptime: 1h 22m Init: systemd v: 241 runlevel: 5 target: graphical.target tool: systemctl Compilers:
           gcc: 8.3.0 alt: 8 Shell: Bash (sudo) v: 5.0.3 running-in: pty pts/0 (SSH) inxi: 3.3.07

Benchmark #51492 - Brand: SanDisk SD Extreme A2 (SF128)