Benchmark #51504 - pibenchmarks.com

Brand: Undentified JMicron USB to SATA Adapter
SSD (2.5" SATA)
#8 / 1,539
826
#322 / 1,539
#308 / 875
#42 / 363
7,294
	Amazon.com AliExpress

Overview
2021-10-20 20:52:48
#51,504
2,001
-5,293 (-264.52%)
butter_fry
Generic USB Flash SSD (loaded RPi4)

Storage Details
Undentified JMicron USB to SATA Adapter
SSD (2.5" SATA)
59.4G
SSD
JMicron
JMicronTech
3.20
5,000
1d6b:0901
0x1d6b (Linux Foundation)
0x0901 (ScanJet 2300c)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
ARMv7 v7l
4
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
97.1 MB/s
167.45 MB/s
183.06 MB/s
721 IOPS
2,776 IOPS
2,885 KB/s
11,104 KB/s
9,927 KB/s
2,730 KB/s
10,209 KB/s
2,904 KB/s

inxi Results
System: Kernel: 5.10.63-v7l+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=435fe655-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Desktop: Openbox 3.6.1 info: lxpanel, docker dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2711 rev: c03112 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.82 GiB used: 1.03 GiB (27.0%) gpu: 76 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 3 bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: X.Org 1.20.4 compositor: xcompmgr driver: loaded: modesetting unloaded: fbdev display-ID: :0.0 screens: 1 Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2") s-diag: 582mm (22.9") Monitor-1: HDMI-1 res: 1920x1080 hz: 60 dpi: 82 size: 598x336mm (23.5x13.2") diag: 686mm (27") Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.63-v7l+ running: yes Sound Server-2: PulseAudio v: 12.2 running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: up mac: IP v4: type: noprefixroute scope: global broadcast: Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: noprefixroute scope: link IF-ID-1: docker0 state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: hassio state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-3: veth08309bc state: up speed: 10000 Mbps duplex: full mac: IF-ID-4: veth2bce142 state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: veth4d542d2 state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: veth516e0e5 state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: veth6d58182 state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: veth7ad96f6 state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: veth86f9887 state: up speed: 10000 Mbps duplex: full mac: IF-ID-10: veth8fe1adf state: up speed: 10000 Mbps duplex: full mac: IF-ID-11: veth9ffd8f7 state: up speed: 10000 Mbps duplex: full mac: IF-ID-12: vethadde612 state: up speed: 10000 Mbps duplex: full mac: IF-ID-13: vethc0befa0 state: up speed: 10000 Mbps duplex: full mac: IF-ID-14: vethcfa8185 state: up speed: 10000 Mbps duplex: full mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept service-classes: rendering, capturing Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 59.62 GiB used: 9.33 GiB (15.7%) ID-1: /dev/sda maj-min: 8:0 type: USB vendor: JMicron Tech model: N/A size: 59.62 GiB block-size: physical: 512 B logical: 512 B type: N/A rev: 3202 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No optical or floppy data found. Partition: ID-1: / raw-size: 59.36 GiB size: 58.18 GiB (98.01%) used: 9.28 GiB (16.0%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: 87b585d1-84c3-486a-8f3d-77cf16f84f30 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.1 MiB (19.1%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 7616-4FD8 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Device-1: 1-1.3:3 info: Microsoft Nano Transceiver v1.0 for Bluetooth type: Keyboard,Mouse,HID driver: hid-generic,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 045e:0745 class-ID: 0300 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-1:2 info: JMicron / JMicron USA type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.2 speed: 5 Gb/s power: 896mA chip-ID: 152d:0901 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 1448 lib: 723 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/mosquitto-buster.list 1: deb https: //repo.mosquitto.org/debian buster main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 293 1: cpu: 9.9% command: pulseaudio pid: 7726 mem: 5.45 MiB (0.1%) 2: cpu: 5.2% command: python3 pid: 12845 mem: 171.0 MiB (4.4%) 3: cpu: 2.7% command: networkmanager pid: 409 mem: 14.9 MiB (0.3%) 4: cpu: 2.1% command: dhcpcd pid: 689 mem: 2.89 MiB (0.0%) 5: cpu: 1.6% command: systemd-journald pid: 132 mem: 22.8 MiB (0.5%) Memory top: 5 of 293 1: mem: 171.0 MiB (4.4%) command: python3 pid: 12845 cpu: 5.2% 2: mem: 63.9 MiB (1.6%) command: xorg pid: 718 cpu: 0.5% 3: mem: 58.3 MiB (1.5%) command: dockerd pid: 736 cpu: 0.4% 4: mem: 58.2 MiB (1.5%) command: node pid: 17211 cpu: 0.0% 5: mem: 50.0 MiB (1.3%) command: lxterminal pid: 2130 cpu: 0.0% Info: Processes: 293 Uptime: 4h 47m Init: systemd v: 241 runlevel: 5 target: graphical.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.07

inxi Results

System:    Kernel: 5.10.63-v7l+ armv7l bits: 32 compiler: N/A
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0
           snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000
           vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=435fe655-02
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
           Desktop: Openbox 3.6.1 info: lxpanel, docker dm: LightDM 1.26.0
           Distro: Raspbian GNU/Linux 10 (buster)
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2711 rev: c03112
           Battery:   Message: No system battery data found. Is one present?
Memory:    RAM: total: 3.82 GiB used: 1.03 GiB (27.0%) gpu: 76 MiB
           RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots: ARM: No ARM data found for this feature.
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l
           family: 7 model-id: 0 stepping: 3 bogomips: 1080
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500
           4: 1500
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32
           vfpv3 vfpv4
           Vulnerabilities: No CPU vulnerability/bugs data available.
Graphics:  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu
           class-ID: gpu
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Display: server: X.Org 1.20.4 compositor: xcompmgr driver: loaded: modesetting
           unloaded: fbdev display-ID: :0.0 screens: 1
           Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2")
           s-diag: 582mm (22.9")
           Monitor-1: HDMI-1 res: 1920x1080 hz: 60 dpi: 82 size: 598x336mm (23.5x13.2")
           diag: 686mm (27")
           Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio
           class-ID: bcm2835_audio
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Sound Server-1: ALSA v: k5.10.63-v7l+ running: yes
           Sound Server-2: PulseAudio v: 12.2 running: yes
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A
           chip-ID: brcm:fe300000 class-ID: mmcnr
           IF: wlan0 state: up mac: 
           IP v4:  type: noprefixroute scope: global broadcast: 
           Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A
           chip-ID: brcm:fd580000 class-ID: ethernet
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 
           IP v4:  type: dynamic noprefixroute scope: global broadcast: 
           IP v6:  type: noprefixroute scope: link
           IF-ID-1: docker0 state: up speed: 10000 Mbps duplex: unknown mac: 
           IP v4:  scope: global broadcast: 
           IP v6:  scope: link
           IF-ID-2: hassio state: up speed: 10000 Mbps duplex: unknown mac: 
           IP v4:  scope: global broadcast: 
           IP v6:  scope: link
           IF-ID-3: veth08309bc state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-4: veth2bce142 state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-5: veth4d542d2 state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-6: veth516e0e5 state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-7: veth6d58182 state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-8: veth7ad96f6 state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-9: veth86f9887 state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-10: veth8fe1adf state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-11: veth9ffd8f7 state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-12: vethadde612 state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-13: vethc0befa0 state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-14: vethcfa8185 state: up speed: 10000 Mbps duplex: full mac: 
           WAN IP: 
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
           Report: hciconfig ID: hci0 rfk-id: 1 state: up address:  bt-v: 3.0 lmp-v: 5.0
           sub-v: 6119 hci-v: 5.0 rev: 156
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept
           service-classes: rendering, capturing
Logical:   Message: No logical block device data found.
RAID:      Message: No RAID data found.
Drives:    Local Storage: total: 59.62 GiB used: 9.33 GiB (15.7%)
           ID-1: /dev/sda maj-min: 8:0 type: USB vendor: JMicron Tech model: N/A size: 59.62 GiB
           block-size: physical: 512 B logical: 512 B type: N/A rev: 3202
           scheme: MBR
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
           Message: No optical or floppy data found.
Partition: ID-1: / raw-size: 59.36 GiB size: 58.18 GiB (98.01%) used: 9.28 GiB (16.0%) fs: ext4
           block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs
           uuid: 87b585d1-84c3-486a-8f3d-77cf16f84f30
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.1 MiB (19.1%) fs: vfat
           block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 7616-4FD8
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
           ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap
Unmounted: Message: No unmounted partitions found.
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s
           chip-ID: 1d6b:0002 class-ID: 0900
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA
           chip-ID: 2109:3431 class-ID: 0900
           Device-1: 1-1.3:3 info: Microsoft Nano Transceiver v1.0 for Bluetooth
           type: Keyboard,Mouse,HID driver: hid-generic,usbhid interfaces: 3 rev: 2.0
           speed: 12 Mb/s power: 100mA chip-ID: 045e:0745 class-ID: 0300
           Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s
           chip-ID: 1d6b:0003 class-ID: 0900
           Device-1: 2-1:2 info: JMicron / JMicron USA type: Mass Storage driver: usb-storage
           interfaces: 1 rev: 3.2 speed: 5 Gb/s power: 896mA chip-ID: 152d:0901 class-ID: 0806
           Sensors:   Missing: Required tool sensors not installed. Check --recommends
Repos:     Packages: apt: 1448 lib: 723
           Active apt repos in: /etc/apt/sources.list
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list
           1: deb [arch=armhf signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/mosquitto-buster.list
           1: deb https: //repo.mosquitto.org/debian buster main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           No active apt repos in: /etc/apt/sources.list.d/vscode.list
Processes: CPU top: 5 of 293
           1: cpu: 9.9% command: pulseaudio pid: 7726 mem: 5.45 MiB (0.1%)
           2: cpu: 5.2% command: python3 pid: 12845 mem: 171.0 MiB (4.4%)
           3: cpu: 2.7% command: networkmanager pid: 409 mem: 14.9 MiB (0.3%)
           4: cpu: 2.1% command: dhcpcd pid: 689 mem: 2.89 MiB (0.0%)
           5: cpu: 1.6% command: systemd-journald pid: 132 mem: 22.8 MiB (0.5%)
           Memory top: 5 of 293
           1: mem: 171.0 MiB (4.4%) command: python3 pid: 12845 cpu: 5.2%
           2: mem: 63.9 MiB (1.6%) command: xorg pid: 718 cpu: 0.5%
           3: mem: 58.3 MiB (1.5%) command: dockerd pid: 736 cpu: 0.4%
           4: mem: 58.2 MiB (1.5%) command: node pid: 17211 cpu: 0.0%
           5: mem: 50.0 MiB (1.3%) command: lxterminal pid: 2130 cpu: 0.0%
Info:      Processes: 293 Uptime: 4h 47m Init: systemd v: 241 runlevel: 5 target: graphical.target
           tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release
           inxi: 3.3.07

Benchmark #51504 - Brand: Undentified JMicron USB to SATA Adapter