Benchmark #51520 - pibenchmarks.com

Brand: Goodram HL100
SSD (Portable)
#797 / 1,675
6
#406 / 1,675
#393 / 984
#50 / 144
7,715
	Amazon.com Amazon.ca Amazon.co.uk Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl

Overview
2021-10-22 02:25:02
#51,520
9,137
+1,422 (+15.56%)
Anonymous
Goodram 256GB

Storage Details
Goodram HL100
SSD (Portable)
256G
SSD
Goodram
SSDPR-HL100-256
SATA
3.20
5,000
152d:0580
0x152d (JMicron Technology Corp. / JMicron USA Technology Corp.)
0x0580 (JM580)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
N/A
4
1,500
500
1,600

Operating System

Debian GNU/Linux 11 (bullseye)
aarch64

Benchmark Results
122 MB/s
306.47 MB/s
272.26 MB/s
21,445 IOPS
23,486 IOPS
85,780 KB/s
93,944 KB/s
36,255 KB/s
29,987 KB/s
18,075 KB/s
34,189 KB/s

inxi Results
System: Kernel: 5.10.0-9-arm64 aarch64 bits: 64 compiler: gcc v: 10.2.1 parameters: dma.dmachans=0x37f5 bcm2709.boardrev=0xd03114 bcm2709.serial=0x12e5307d bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=tty0 console=ttyS1,115200 root=/dev/sda2 rw fsck.repair=yes net.ifnames=0 rootwait Console: N/A Distro: Debian GNU/Linux 11 (bullseye) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: N/A Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 7.7 GiB used: 1.69 GiB (21.9%) gpu: 76 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 bogomips: 432 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: No display server data found. Headless machine? tty: N/A Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Sound Server-1: ALSA v: k5.10.0-9-arm64 running: yes Network: Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: down mac: Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq IF-ID-1: docker0 state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: hassio state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-3: veth33d26dd state: up speed: 10000 Mbps duplex: full mac: IF-ID-4: veth3fd34b3 state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: veth627b1b2 state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: veth7779e20 state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: veth9d2dd8c state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: vetha04f964 state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: vethde624ed state: up speed: 10000 Mbps duplex: full mac: IF-ID-10: vethe13cfe2 state: up speed: 10000 Mbps duplex: full mac: IF-ID-11: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: noprefixroute scope: link WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: hardware: no software: no address: see --recommends Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial Report: This feature requires one of these tools: hciconfig/bt-adapter Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 297.95 GiB used: 8.5 GiB (2.9%) ID-1: /dev/mmcblk1 maj-min: 179:0 model: SB64G size: 59.48 GiB block-size: physical: 512 B logical: 512 B type: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/sda maj-min: 8:0 type: USB vendor: GOODRAM model: SSDPR-HL100-256 size: 238.47 GiB block-size: physical: 4096 B logical: 512 B type: SSD rev: 1101 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No optical or floppy data found. Partition: ID-1: / raw-size: 238.18 GiB size: 234.64 GiB (98.51%) used: 8.38 GiB (3.6%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT uuid: 899ea962-703a-49b8-926a-33b14329c638 ID-2: /boot/firmware raw-size: 296 MiB size: 295.8 MiB (99.93%) used: 126.3 MiB (42.7%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: RASPIFIRM uuid: 7F54-1442 Swap: Alert: No swap data was found. Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Device-1: 1-1.3:3 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s power: 98mA chip-ID: 046d:c52b class-ID: 0300 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-1:2 info: JMicron / JMicron USA SSD 256GB type: Mass Storage driver: uas interfaces: 1 rev: 3.2 speed: 5 Gb/s power: 896mA chip-ID: 152d:0580 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 574 lib: 304 Active apt repos in: /etc/apt/sources.list 1: deb http: //deb.debian.org/debian bullseye main contrib non-free 2: deb http: //security.debian.org/debian-security bullseye-security main contrib non-free 3: deb http: //archive.raspberrypi.org/debian/ bullseye main Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=arm64 signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https: //download.docker.com/linux/debian bullseye stable Active apt repos in: /etc/apt/sources.list.d/grafana.list 1: deb https: //packages.grafana.com/oss/deb stable main Active apt repos in: /etc/apt/sources.list.d/influxdb.list 1: deb https: //repos.influxdata.com/debian bullseye stable Processes: CPU top: 5 of 228 1: cpu: 3.1% command: python3 pid: 28599 mem: 239.5 MiB (3.0%) 2: cpu: 1.3% command: python3 pid: 1763 mem: 118.4 MiB (1.5%) 3: cpu: 0.8% command: node-red pid: 6328 mem: 124.7 MiB (1.5%) 4: cpu: 0.6% command: telegraf pid: 591 mem: 97.9 MiB (1.2%) 5: cpu: 0.6% command: influxd pid: 631 mem: 226.7 MiB (2.9%) Memory top: 5 of 228 1: mem: 239.5 MiB (3.0%) command: python3 pid: 28599 cpu: 3.1% 2: mem: 226.7 MiB (2.9%) command: influxd pid: 631 cpu: 0.6% 3: mem: 124.7 MiB (1.5%) command: node-red pid: 6328 cpu: 0.8% 4: mem: 118.4 MiB (1.5%) command: python3 pid: 1763 cpu: 1.3% 5: mem: 97.9 MiB (1.2%) command: telegraf pid: 591 cpu: 0.6% Info: Processes: 228 Uptime: 11h 56m Init: systemd v: 247 runlevel: 5 tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.08

inxi Results

System:    Kernel: 5.10.0-9-arm64 aarch64 bits: 64 compiler: gcc v: 10.2.1
           parameters:  dma.dmachans=0x37f5 bcm2709.boardrev=0xd03114 bcm2709.serial=0x12e5307d
           bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000
           vc_mem.mem_size=0x3ff00000 console=tty0 console=ttyS1,115200 root=/dev/sda2 rw
           fsck.repair=yes net.ifnames=0 rootwait
           Console: N/A Distro: Debian GNU/Linux 11 (bullseye)
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: N/A Battery:   Message: No system battery data found. Is one present?
Memory:    RAM: total: 7.7 GiB used: 1.69 GiB (21.9%) gpu: 76 MiB
           RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots: ARM: No ARM data found for this feature.
CPU:       Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8
           model-id: 0 stepping: 3 bogomips: 432
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500
           4: 1500
           Features: asimd cpuid crc32 evtstrm fp
           Vulnerabilities: Type: itlb_multihit status: Not affected
           Type: l1tf status: Not affected
           Type: mds status: Not affected
           Type: meltdown status: Not affected
           Type: spec_store_bypass status: Vulnerable
           Type: spectre_v1 mitigation: __user pointer sanitization
           Type: spectre_v2 status: Vulnerable
           Type: srbds status: Not affected
           Type: tsx_async_abort status: Not affected
Graphics:  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700
           class-ID: hdmi
           Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700
           class-ID: hdmi
           Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu
           class-ID: gpu
           Display: server: No display server data found. Headless machine? tty: N/A
           Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:     Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700
           class-ID: hdmi
           Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700
           class-ID: hdmi
           Sound Server-1: ALSA v: k5.10.0-9-arm64 running: yes
Network:   Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A
           chip-ID: brcm:fd580000 class-ID: ethernet
           IF: eth0 state: down mac: 
           Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A
           chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq
           IF-ID-1: docker0 state: up speed: 10000 Mbps duplex: unknown mac: 
           IP v4:  scope: global broadcast: 
           IP v6:  scope: link
           IF-ID-2: hassio state: up speed: 10000 Mbps duplex: unknown mac: 
           IP v4:  scope: global broadcast: 
           IP v6:  scope: link
           IF-ID-3: veth33d26dd state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-4: veth3fd34b3 state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-5: veth627b1b2 state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-6: veth7779e20 state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-7: veth9d2dd8c state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-8: vetha04f964 state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-9: vethde624ed state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-10: vethe13cfe2 state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-11: wlan0 state: up mac: 
           IP v4:  type: dynamic noprefixroute scope: global broadcast: 
           IP v6:  type: noprefixroute scope: link
           WAN IP: 
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
           Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block:
           hardware: no software: no address: see --recommends
           Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial
           Report: This feature requires one of these tools: hciconfig/bt-adapter
Logical:   Message: No logical block device data found.
RAID:      Message: No RAID data found.
Drives:    Local Storage: total: 297.95 GiB used: 8.5 GiB (2.9%)
           ID-1: /dev/mmcblk1 maj-min: 179:0 model: SB64G size: 59.48 GiB block-size:
           physical: 512 B logical: 512 B type: SSD scheme: MBR
           SMART Message: Unknown smartctl error. Unable to generate data.
           ID-2: /dev/sda maj-min: 8:0 type: USB vendor: GOODRAM model: SSDPR-HL100-256
           size: 238.47 GiB block-size: physical: 4096 B logical: 512 B type: SSD rev: 1101 scheme: MBR
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
           Message: No optical or floppy data found.
Partition: ID-1: / raw-size: 238.18 GiB size: 234.64 GiB (98.51%) used: 8.38 GiB (3.6%) fs: ext4
           block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT
           uuid: 899ea962-703a-49b8-926a-33b14329c638
           ID-2: /boot/firmware raw-size: 296 MiB size: 295.8 MiB (99.93%) used: 126.3 MiB (42.7%)
           fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: RASPIFIRM uuid: 7F54-1442
Swap:      Alert: No swap data was found.
Unmounted: Message: No unmounted partitions found.
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s
           chip-ID: 1d6b:0002 class-ID: 0900
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA
           chip-ID: 2109:3431 class-ID: 0900
           Device-1: 1-1.3:3 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID
           driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s power: 98mA
           chip-ID: 046d:c52b class-ID: 0300
           Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s
           chip-ID: 1d6b:0003 class-ID: 0900
           Device-1: 2-1:2 info: JMicron / JMicron USA SSD 256GB type: Mass Storage driver: uas
           interfaces: 1 rev: 3.2 speed: 5 Gb/s power: 896mA chip-ID: 152d:0580 class-ID: 0806
           Sensors:   Missing: Required tool sensors not installed. Check --recommends
Repos:     Packages: apt: 574 lib: 304
           Active apt repos in: /etc/apt/sources.list
           1: deb http: //deb.debian.org/debian bullseye main contrib non-free
           2: deb http: //security.debian.org/debian-security bullseye-security main contrib non-free
           3: deb http: //archive.raspberrypi.org/debian/ bullseye main
           Active apt repos in: /etc/apt/sources.list.d/docker.list
           1: deb [arch=arm64 signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https: //download.docker.com/linux/debian bullseye stable
           Active apt repos in: /etc/apt/sources.list.d/grafana.list
           1: deb https: //packages.grafana.com/oss/deb stable main
           Active apt repos in: /etc/apt/sources.list.d/influxdb.list
           1: deb https: //repos.influxdata.com/debian bullseye stable
Processes: CPU top: 5 of 228
           1: cpu: 3.1% command: python3 pid: 28599 mem: 239.5 MiB (3.0%)
           2: cpu: 1.3% command: python3 pid: 1763 mem: 118.4 MiB (1.5%)
           3: cpu: 0.8% command: node-red pid: 6328 mem: 124.7 MiB (1.5%)
           4: cpu: 0.6% command: telegraf pid: 591 mem: 97.9 MiB (1.2%)
           5: cpu: 0.6% command: influxd pid: 631 mem: 226.7 MiB (2.9%)
           Memory top: 5 of 228
           1: mem: 239.5 MiB (3.0%) command: python3 pid: 28599 cpu: 3.1%
           2: mem: 226.7 MiB (2.9%) command: influxd pid: 631 cpu: 0.6%
           3: mem: 124.7 MiB (1.5%) command: node-red pid: 6328 cpu: 0.8%
           4: mem: 118.4 MiB (1.5%) command: python3 pid: 1763 cpu: 1.3%
           5: mem: 97.9 MiB (1.2%) command: telegraf pid: 591 cpu: 0.6%
Info:      Processes: 228 Uptime: 11h 56m Init: systemd v: 247 runlevel: 5 tool: systemctl
           Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.08

Benchmark #51520 - Brand: Goodram HL100