Benchmark #51779 - pibenchmarks.com

Brand: Samsung Fit Plus
USB Flash
#39 / 1,675
397
#1,003 / 1,675
#8 / 93
#11 / 89
3,079
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-10-28 11:44:15
#51,779
1,570
-1,509 (-96.11%)
Anonymous
Samsung FIT on Pi 4

Storage Details
Samsung Fit Plus
USB Flash
119.5G
USB Flash
Samsung
FlashDriveFIT
2.00
480
090c:1000
0x090c
0x1000 (Mustek BearPaw 1200 Scanner)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
ARMv7 v7l
4
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
22.3 MB/s
17.31 MB/s
21.99 MB/s
2,145 IOPS
1,157 IOPS
8,583 KB/s
4,628 KB/s
6,362 KB/s
5,705 KB/s
4,242 KB/s
7,944 KB/s

inxi Results
perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LC_MONETARY = "de_DE.UTF-8", LC_PAPER = "de_DE.UTF-8", LC_MEASUREMENT = "de_DE.UTF-8", LC_TIME = "de_DE.UTF-8", LC_NUMERIC = "de_DE.UTF-8", LANG = "en_GB.UTF-8" are supported and installed on your system. perl: warning: Falling back to a fallback locale ("en_GB.UTF-8"). System: Host: clearpi Kernel: 5.10.63-v7l+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/sdb1 rootfstype=ext4 elevator=deadline fsck.repair=yes group_memory=1 cgroup_enable=memory rootwait rootdelay=5 Console: pty pts/0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2711 rev: d03114 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 7.79 GiB used: 673.5 MiB (8.4%) gpu: 76 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 3 bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: No display server data found. Headless machine? tty: 318x77 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.63-v7l+ running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: down mac: XX:XX:XX:XX:XX:XX Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 10.1.X.X/24 type: dynamic noprefixroute scope: global broadcast: 10.1.X.X IP v4: 10.1.X.X/24 type: secondary dynamic noprefixroute scope: global broadcast: 10.1.X.X IP v6: fe80::9704:628d:cab6:e3a/64 type: noprefixroute scope: link IF-ID-1: br-3e023b7898cb state: up speed: 10000 Mbps duplex: unknown mac: XX:XX:XX:XX:XX:XX IP v4: 172.18.X.X/16 scope: global broadcast: 172.18.X.X IP v6: fe80::42:f0ff:fe0b:fe11/64 scope: link IF-ID-2: br-b18e997ab4c6 state: down mac: XX:XX:XX:XX:XX:XX IP v4: 172.19.X.X/16 scope: global broadcast: 172.19.X.X IF-ID-3: docker0 state: up speed: 10000 Mbps duplex: unknown mac: XX:XX:XX:XX:XX:XX IP v4: 172.17.X.X/16 scope: global broadcast: 172.17.X.X IP v6: fe80::42:8bff:fe33:8944/64 scope: link IF-ID-4: hassio state: up speed: 10000 Mbps duplex: unknown mac: XX:XX:XX:XX:XX:XX IP v4: 172.30.X.X/23 scope: global broadcast: 172.30.X.X IP v6: fe80::42:26ff:fe2d:74eb/64 scope: link IF-ID-5: veth5cb0133 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-6: veth6241735 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-7: veth6bd1af0 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-8: veth9b0be13 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-9: vetha61061d state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-10: vethd7f6ebc state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-11: vethffde0c1 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX WAN IP: 185.107.X.X Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: XX:XX:XX:XX:XX:XX bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept Logical: Device-1: VG: pi type: LVM2 size: 232.88 GiB free: 0 KiB LV-1: data maj-min: 254:0 type: linear dm: dm-0 size: 232.88 GiB Components: p-1: sda maj-min: 8:0 size: 232.89 GiB RAID: Message: No RAID data found. Drives: Local Storage: total: 382.12 GiB used: 7.82 GiB (2.0%) ID-1: /dev/mmcblk0 maj-min: 179:0 model: ACLCD size: 29.72 GiB block-size: physical: 512 B logical: 512 B type: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Inateck model: FE202x Series size: 232.89 GiB block-size: physical: 512 B logical: 512 B type: N/A rev: 1.00 SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? ID-3: /dev/sdb maj-min: 8:16 type: USB vendor: Samsung model: Flash Drive FIT size: 119.51 GiB block-size: physical: 512 B logical: 512 B type: SSD rev: 1100 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No optical or floppy data found. Partition: ID-1: / raw-size: 119.51 GiB size: 117.13 GiB (98.01%) used: 7.78 GiB (6.6%) fs: ext4 block-size: 4096 B dev: /dev/sdb1 maj-min: 8:17 label: N/A uuid: 5f60e2ca-9b53-4825-831b-789350064ad0 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.1 MiB (19.1%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: 4AD7-B4D5 ID-3: /mnt/nas/docker/CABO-BO-HOM02 raw-size: N/A size: 10.47 TiB used: 6.14 TiB (58.7%) fs: nfs4 remote: CABO-FLE-NAS001.localdomain:/volume1/docker/CABO-BO-HOM02 ID-4: /mnt/nas/docker/CABO-BO-PXY01 raw-size: N/A size: 10.47 TiB used: 6.14 TiB (58.7%) fs: nfs4 remote: CABO-FLE-NAS001.localdomain:/volume1/docker/CABO-BO-PXY01 ID-5: /mnt/nas/docker/CABO-BO-PXY02 raw-size: N/A size: 10.47 TiB used: 6.14 TiB (58.7%) fs: nfs4 remote: CABO-FLE-NAS001.localdomain:/volume1/docker/CABO-BO-PXY02 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/dm-0 maj-min: 254:0 mapped: pi-data size: 232.88 GiB fs: N/A label: N/A uuid: N/A ID-2: /dev/mmcblk0p2 maj-min: 179:2 size: 29.47 GiB fs: ext4 label: rootfs uuid: 2887d26c-6ae7-449d-9701-c5a4018755b0 USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Device-1: 1-1.3:3 info: Silicon Motion - Taiwan (formerly Feiya ) Flash Drive type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 300mA chip-ID: 090c:1000 class-ID: 0806 Device-2: 1-1.4:4 info: Realtek type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 500mA chip-ID: 0bda:9210 class-ID: 0806 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 729 lib: 374 Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https://download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main No active apt repos in: /etc/apt/sources.list.d/soma-dev-repo-id.list No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 208 1: cpu: 12.8% command: python3 pid: 2708 mem: 36.9 MiB (0.4%) 2: cpu: 11.1% command: coredns pid: 3726 mem: 17.8 MiB (0.2%) 3: cpu: 10.0% command: dockerd pid: 1066 mem: 60.5 MiB (0.7%) 4: cpu: 8.0% command: runc pid: 3824 mem: 9.62 MiB (0.1%) 5: cpu: 7.1% command: init pid: 1 mem: 8.13 MiB (0.1%) Memory top: 5 of 208 1: mem: 78.9 MiB (0.9%) command: haproxy pid: 1819 cpu: 2.6% 2: mem: 70.1 MiB (0.8%) command: haproxy pid: 2207 cpu: 1.3% 3: mem: 60.5 MiB (0.7%) command: dockerd pid: 1066 cpu: 10.0% 4: mem: 42.6 MiB (0.5%) command: libnetwork-setkey pid: 3842 cpu: 0.0% 5: mem: 41.4 MiB (0.5%) command: 37bcb62b2150 started by: setup-resolver pid: 3858 cpu: 0.0% Info: Processes: 208 Uptime: 1m Init: systemd v: 241 runlevel: 5 tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Shell: storage.sh (sudo) default: Bash v: 5.0.3 running-in: pty pts/0 (SSH) inxi: 3.3.08

inxi Results

perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
	LANGUAGE = (unset),
	LC_ALL = (unset),
	LC_MONETARY = "de_DE.UTF-8",
	LC_PAPER = "de_DE.UTF-8",
	LC_MEASUREMENT = "de_DE.UTF-8",
	LC_TIME = "de_DE.UTF-8",
	LC_NUMERIC = "de_DE.UTF-8",
	LANG = "en_GB.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_GB.UTF-8").
System:    Host: clearpi Kernel: 5.10.63-v7l+ armv7l bits: 32 compiler: N/A
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0
           console=ttyS0,115200 console=tty1 root=/dev/sdb1 rootfstype=ext4 elevator=deadline fsck.repair=yes group_memory=1
           cgroup_enable=memory rootwait rootdelay=5
           Console: pty pts/0 Distro: Raspbian GNU/Linux 10 (buster)
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2711 rev: d03114 Battery:   Message: No system battery data found. Is one present?
Memory:    RAM: total: 7.79 GiB used: 673.5 MiB (8.4%) gpu: 76 MiB
           RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots: ARM: No ARM data found for this feature.
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 3
           bogomips: 1080
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4
           Vulnerabilities: No CPU vulnerability/bugs data available.
Graphics:  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Display: server: No display server data found. Headless machine? tty: 318x77
           Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Sound Server-1: ALSA v: k5.10.63-v7l+ running: yes
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr
           IF: wlan0 state: down mac: XX:XX:XX:XX:XX:XX
           Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
           IP v4: 10.1.X.X/24 type: dynamic noprefixroute scope: global broadcast: 10.1.X.X
           IP v4: 10.1.X.X/24 type: secondary dynamic noprefixroute scope: global broadcast: 10.1.X.X
           IP v6: fe80::9704:628d:cab6:e3a/64 type: noprefixroute scope: link
           IF-ID-1: br-3e023b7898cb state: up speed: 10000 Mbps duplex: unknown mac: XX:XX:XX:XX:XX:XX
           IP v4: 172.18.X.X/16 scope: global broadcast: 172.18.X.X
           IP v6: fe80::42:f0ff:fe0b:fe11/64 scope: link
           IF-ID-2: br-b18e997ab4c6 state: down mac: XX:XX:XX:XX:XX:XX
           IP v4: 172.19.X.X/16 scope: global broadcast: 172.19.X.X
           IF-ID-3: docker0 state: up speed: 10000 Mbps duplex: unknown mac: XX:XX:XX:XX:XX:XX
           IP v4: 172.17.X.X/16 scope: global broadcast: 172.17.X.X
           IP v6: fe80::42:8bff:fe33:8944/64 scope: link
           IF-ID-4: hassio state: up speed: 10000 Mbps duplex: unknown mac: XX:XX:XX:XX:XX:XX
           IP v4: 172.30.X.X/23 scope: global broadcast: 172.30.X.X
           IP v6: fe80::42:26ff:fe2d:74eb/64 scope: link
           IF-ID-5: veth5cb0133 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
           IF-ID-6: veth6241735 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
           IF-ID-7: veth6bd1af0 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
           IF-ID-8: veth9b0be13 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
           IF-ID-9: vetha61061d state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
           IF-ID-10: vethd7f6ebc state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
           IF-ID-11: vethffde0c1 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
           WAN IP: 185.107.X.X
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
           Report: hciconfig ID: hci0 rfk-id: 1 state: up address: XX:XX:XX:XX:XX:XX bt-v: 3.0 lmp-v: 5.0 sub-v: 6119
           hci-v: 5.0 rev: 156
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept
Logical:   Device-1: VG: pi type: LVM2 size: 232.88 GiB free: 0 KiB
           LV-1: data maj-min: 254:0 type: linear dm: dm-0 size: 232.88 GiB
           Components:
           p-1: sda maj-min: 8:0 size: 232.89 GiB
RAID:      Message: No RAID data found.
Drives:    Local Storage: total: 382.12 GiB used: 7.82 GiB (2.0%)
           ID-1: /dev/mmcblk0 maj-min: 179:0 model: ACLCD size: 29.72 GiB block-size: physical: 512 B logical: 512 B type: SSD
           scheme: MBR
           SMART Message: Unknown smartctl error. Unable to generate data.
           ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Inateck model: FE202x Series size: 232.89 GiB block-size:
           physical: 512 B logical: 512 B type: N/A rev: 1.00
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
           ID-3: /dev/sdb maj-min: 8:16 type: USB vendor: Samsung model: Flash Drive FIT size: 119.51 GiB block-size:
           physical: 512 B logical: 512 B type: SSD rev: 1100 scheme: MBR
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
           Message: No optical or floppy data found.
Partition: ID-1: / raw-size: 119.51 GiB size: 117.13 GiB (98.01%) used: 7.78 GiB (6.6%) fs: ext4 block-size: 4096 B
           dev: /dev/sdb1 maj-min: 8:17 label: N/A uuid: 5f60e2ca-9b53-4825-831b-789350064ad0
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.1 MiB (19.1%) fs: vfat block-size: 512 B
           dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: 4AD7-B4D5
           ID-3: /mnt/nas/docker/CABO-BO-HOM02 raw-size: N/A size: 10.47 TiB used: 6.14 TiB (58.7%) fs: nfs4
           remote: CABO-FLE-NAS001.localdomain:/volume1/docker/CABO-BO-HOM02
           ID-4: /mnt/nas/docker/CABO-BO-PXY01 raw-size: N/A size: 10.47 TiB used: 6.14 TiB (58.7%) fs: nfs4
           remote: CABO-FLE-NAS001.localdomain:/volume1/docker/CABO-BO-PXY01
           ID-5: /mnt/nas/docker/CABO-BO-PXY02 raw-size: N/A size: 10.47 TiB used: 6.14 TiB (58.7%) fs: nfs4
           remote: CABO-FLE-NAS001.localdomain:/volume1/docker/CABO-BO-PXY02
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
           ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap
Unmounted: ID-1: /dev/dm-0 maj-min: 254:0 mapped: pi-data size: 232.88 GiB fs: N/A label: N/A uuid: N/A
           ID-2: /dev/mmcblk0p2 maj-min: 179:2 size: 29.47 GiB fs: ext4 label: rootfs
           uuid: 2887d26c-6ae7-449d-9701-c5a4018755b0
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900
           Device-1: 1-1.3:3 info: Silicon Motion - Taiwan (formerly Feiya ) Flash Drive type: Mass Storage
           driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 300mA chip-ID: 090c:1000 class-ID: 0806
                      Device-2: 1-1.4:4 info: Realtek type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s
           power: 500mA chip-ID: 0bda:9210 class-ID: 0806            Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900
Sensors:   Missing: Required tool sensors not installed. Check --recommends
Repos:     Packages: apt: 729 lib: 374
           Active apt repos in: /etc/apt/sources.list
           1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list
           1: deb [arch=armhf] https://download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list
           1: deb http://archive.raspberrypi.org/debian/ buster main
           No active apt repos in: /etc/apt/sources.list.d/soma-dev-repo-id.list
           No active apt repos in: /etc/apt/sources.list.d/vscode.list
Processes: CPU top: 5 of 208
           1: cpu: 12.8% command: python3 pid: 2708 mem: 36.9 MiB (0.4%)
           2: cpu: 11.1% command: coredns pid: 3726 mem: 17.8 MiB (0.2%)
           3: cpu: 10.0% command: dockerd pid: 1066 mem: 60.5 MiB (0.7%)
           4: cpu: 8.0% command: runc pid: 3824 mem: 9.62 MiB (0.1%)
           5: cpu: 7.1% command: init pid: 1 mem: 8.13 MiB (0.1%)
           Memory top: 5 of 208
           1: mem: 78.9 MiB (0.9%) command: haproxy pid: 1819 cpu: 2.6%
           2: mem: 70.1 MiB (0.8%) command: haproxy pid: 2207 cpu: 1.3%
           3: mem: 60.5 MiB (0.7%) command: dockerd pid: 1066 cpu: 10.0%
           4: mem: 42.6 MiB (0.5%) command: libnetwork-setkey pid: 3842 cpu: 0.0%
           5: mem: 41.4 MiB (0.5%) command: 37bcb62b2150 started by: setup-resolver pid: 3858 cpu: 0.0%
Info:      Processes: 208 Uptime: 1m Init: systemd v: 241 runlevel: 5 tool: systemctl Compilers: gcc: 8.3.0 alt: 8
           Shell: storage.sh (sudo) default: Bash v: 5.0.3 running-in: pty pts/0 (SSH) inxi: 3.3.08

Benchmark #51779 - Brand: Samsung Fit Plus