Benchmark #51980 - pibenchmarks.com

Brand: SanDisk Ultra 3D NAND
SSD (2.5" SATA)
#145 / 1,672
106
#562 / 1,672
#543 / 983
#111 / 370
6,633
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-11-01 13:20:28
#51,980
8,835
+2,202 (+24.92%)
Anonymous
test

Storage Details
SanDisk Ultra 3D NAND
SSD (2.5" SATA)
1000G
SSD
SanDisk
SDSSDH31T00
2.5 inch
SATA
3.10
5,000
174c:55aa
0x174c (ASMedia Technology Inc.)
0x55aa (ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
N/A
4
2,000 (+500)
500
1,600

Operating System

Ubuntu 21.10
aarch64

Benchmark Results
118 MB/s
336.44 MB/s
290.23 MB/s
19,980 IOPS
25,924 IOPS
79,921 KB/s
103,696 KB/s
31,228 KB/s
27,126 KB/s
21,309 KB/s
31,563 KB/s

inxi Results
System: Kernel: 5.13.0-1009-raspi aarch64 bits: 64 compiler: gcc v: 11.2.0 parameters: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1280 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=LABEL=writable rootfstype=ext4 elevator=deadline rootwait fixrtc quiet splash Console: pty pts/0 Distro: Ubuntu 21.10 (Impish Indri) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2835 rev: d03114 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 7.7 GiB used: 588.6 MiB (7.5%) gpu: 76 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 bogomips: 432 Speed: 600 MHz min/max: 600/2000 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc class-ID: fb Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: No display server data found. Headless machine? tty: 140x42 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.13.0-1009-raspi running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: up mac: IP v4: type: dynamic scope: global broadcast: Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: scope: global broadcast: WAN IP: Bluetooth: Device-1: bcm2835-pl011 driver: uart_pl011 bus-ID: N/A chip-ID: brcm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 931.51 GiB used: 17.07 GiB (1.8%) ID-1: /dev/sda maj-min: 8:0 type: USB model: USB 3.0 TOSATA drive model: SDSSDH3 1T00 size: 931.51 GiB block-size: physical: 512 B logical: 512 B sata: 3.3 speed: 6.0 Gb/s type: SSD rev: 401100RL temp: 28 C scheme: MBR SMART: yes state: enabled health: PASSED on: 180d 6h cycles: 1832 read: 7.7 MiB written: 3.8 MiB Message: No optical or floppy data found. Partition: ID-1: / raw-size: 931.26 GiB size: 931.13 GiB (99.99%) used: 16.97 GiB (1.8%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: writable uuid: 87f67789-4694-4d47-8fcd-d86ef4277f59 ID-2: /boot/firmware raw-size: 256 MiB size: 252 MiB (98.46%) used: 102.2 MiB (40.5%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: system-boot uuid: FE3C-0011 Swap: Alert: No swap data was found. Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-2:2 info: ASMedia ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s chip-ID: 174c:55aa class-ID: 0806 Hub-4: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: 808 apt: 804 lib: 414 snap: 4 Active apt repos in: /etc/apt/sources.list 1: deb http: //ports.ubuntu.com/ubuntu-ports impish main restricted 2: deb http: //ports.ubuntu.com/ubuntu-ports impish-updates main restricted 3: deb http: //ports.ubuntu.com/ubuntu-ports impish universe 4: deb http: //ports.ubuntu.com/ubuntu-ports impish-updates universe 5: deb http: //ports.ubuntu.com/ubuntu-ports impish multiverse 6: deb http: //ports.ubuntu.com/ubuntu-ports impish-updates multiverse 7: deb http: //ports.ubuntu.com/ubuntu-ports impish-backports main restricted universe multiverse 8: deb http: //ports.ubuntu.com/ubuntu-ports impish-security main restricted 9: deb http: //ports.ubuntu.com/ubuntu-ports impish-security universe 10: deb http: //ports.ubuntu.com/ubuntu-ports impish-security multiverse Processes: CPU top: 5 of 150 1: cpu: 0.4% command: init pid: 1 mem: 12.0 MiB (0.1%) 2: cpu: 0.3% command: [kworker/1:0-events] pid: 2197 mem: 0.00 MiB (0.0%) 3: cpu: 0.3% command: [kworker/1:2-events] pid: 2478 mem: 0.00 MiB (0.0%) 4: cpu: 0.3% command: smartd pid: 3246 mem: 5.03 MiB (0.0%) 5: cpu: 0.2% command: [irq/37-mmc0] pid: 146 mem: 0.00 MiB (0.0%) Memory top: 5 of 150 1: mem: 29.0 MiB (0.3%) command: snapd pid: 1969 cpu: 0.1% 2: mem: 19.4 MiB (0.2%) command: unattended-upgrade-shutdown started by: python3 pid: 2024 cpu: 0.0% 3: mem: 18.1 MiB (0.2%) command: packagekitd pid: 2726 cpu: 0.2% 4: mem: 17.2 MiB (0.2%) command: networkd-dispatcher started by: python3 pid: 1962 cpu: 0.0% 5: mem: 17.1 MiB (0.2%) command: multipathd pid: 1875 cpu: 0.0% Info: Processes: 150 Uptime: 26m Init: systemd v: 248 runlevel: 3 target: multi-user.target tool: systemctl Compilers: gcc: N/A Client: shell wrapper v: 5.1.8-release inxi: 3.3.08

inxi Results

System:    Kernel: 5.13.0-1009-raspi aarch64 bits: 64 compiler: gcc v: 11.2.0
           parameters: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0
           snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1280
           bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000
           vc_mem.mem_size=0x3ff00000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1
           root=LABEL=writable rootfstype=ext4 elevator=deadline rootwait fixrtc quiet splash
           Console: pty pts/0 Distro: Ubuntu 21.10 (Impish Indri)
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2835 rev: d03114
           Battery:   Message: No system battery data found. Is one present?
Memory:    RAM: total: 7.7 GiB used: 588.6 MiB (7.5%) gpu: 76 MiB
           RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots: ARM: No ARM data found for this feature.
CPU:       Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8
           model-id: 0 stepping: 3 bogomips: 432
           Speed: 600 MHz min/max: 600/2000 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600
           Features: asimd cpuid crc32 evtstrm fp
           Vulnerabilities: Type: itlb_multihit status: Not affected
           Type: l1tf status: Not affected
           Type: mds status: Not affected
           Type: meltdown status: Not affected
           Type: spec_store_bypass status: Vulnerable
           Type: spectre_v1 mitigation: __user pointer sanitization
           Type: spectre_v2 status: Vulnerable
           Type: srbds status: Not affected
           Type: tsx_async_abort status: Not affected
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc
           class-ID: fb
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Display: server: No display server data found. Headless machine? tty: 140x42
           Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio
           class-ID: bcm2835_audio
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Sound Server-1: ALSA v: k5.13.0-1009-raspi running: yes
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A
           chip-ID: brcm:fe300000 class-ID: mmcnr
           IF: wlan0 state: up mac: 
           IP v4:  type: dynamic scope: global broadcast: 
           Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A
           chip-ID: brcm:fd580000 class-ID: ethernet
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 
           IP v4:  scope: global broadcast: 
           WAN IP: 
Bluetooth: Device-1: bcm2835-pl011 driver: uart_pl011 bus-ID: N/A chip-ID: brcm:fe201000
           class-ID: serial
           Report: hciconfig ID: hci0 rfk-id: 1 state: up address:  bt-v: 3.0 lmp-v: 5.0
           sub-v: 6119 hci-v: 5.0 rev: 156
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept
Logical:   Message: No logical block device data found.
RAID:      Message: No RAID data found.
Drives:    Local Storage: total: 931.51 GiB used: 17.07 GiB (1.8%)
           ID-1: /dev/sda maj-min: 8:0 type: USB model: USB 3.0 TOSATA drive model: SDSSDH3 1T00
           size: 931.51 GiB block-size: physical: 512 B logical: 512 B sata: 3.3 speed: 6.0 Gb/s
           type: SSD rev: 401100RL temp: 28 C scheme: MBR
           SMART: yes state: enabled health: PASSED on: 180d 6h cycles: 1832 read: 7.7 MiB
           written: 3.8 MiB
           Message: No optical or floppy data found.
Partition: ID-1: / raw-size: 931.26 GiB size: 931.13 GiB (99.99%) used: 16.97 GiB (1.8%) fs: ext4
           block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: writable
           uuid: 87f67789-4694-4d47-8fcd-d86ef4277f59
           ID-2: /boot/firmware raw-size: 256 MiB size: 252 MiB (98.46%) used: 102.2 MiB (40.5%)
           fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: system-boot
           uuid: FE3C-0011
Swap:      Alert: No swap data was found.
Unmounted: Message: No unmounted partitions found.
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s
           chip-ID: 1d6b:0002 class-ID: 0900
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA
           chip-ID: 2109:3431 class-ID: 0900
           Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s
           chip-ID: 1d6b:0003 class-ID: 0900
           Device-1: 2-2:2 info: ASMedia ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge
           ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge
           type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s chip-ID: 174c:55aa
           class-ID: 0806 Hub-4: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s
           chip-ID: 1d6b:0002 class-ID: 0900
Sensors:   Missing: Required tool sensors not installed. Check --recommends
Repos:     Packages: 808 apt: 804 lib: 414 snap: 4
           Active apt repos in: /etc/apt/sources.list
           1: deb http: //ports.ubuntu.com/ubuntu-ports impish main restricted
           2: deb http: //ports.ubuntu.com/ubuntu-ports impish-updates main restricted
           3: deb http: //ports.ubuntu.com/ubuntu-ports impish universe
           4: deb http: //ports.ubuntu.com/ubuntu-ports impish-updates universe
           5: deb http: //ports.ubuntu.com/ubuntu-ports impish multiverse
           6: deb http: //ports.ubuntu.com/ubuntu-ports impish-updates multiverse
           7: deb http: //ports.ubuntu.com/ubuntu-ports impish-backports main restricted universe multiverse
           8: deb http: //ports.ubuntu.com/ubuntu-ports impish-security main restricted
           9: deb http: //ports.ubuntu.com/ubuntu-ports impish-security universe
           10: deb http: //ports.ubuntu.com/ubuntu-ports impish-security multiverse
Processes: CPU top: 5 of 150
           1: cpu: 0.4% command: init pid: 1 mem: 12.0 MiB (0.1%)
           2: cpu: 0.3% command: [kworker/1:0-events] pid: 2197 mem: 0.00 MiB (0.0%)
           3: cpu: 0.3% command: [kworker/1:2-events] pid: 2478 mem: 0.00 MiB (0.0%)
           4: cpu: 0.3% command: smartd pid: 3246 mem: 5.03 MiB (0.0%)
           5: cpu: 0.2% command: [irq/37-mmc0] pid: 146 mem: 0.00 MiB (0.0%)
           Memory top: 5 of 150
           1: mem: 29.0 MiB (0.3%) command: snapd pid: 1969 cpu: 0.1%
           2: mem: 19.4 MiB (0.2%) command: unattended-upgrade-shutdown started by: python3
           pid: 2024 cpu: 0.0%
           3: mem: 18.1 MiB (0.2%) command: packagekitd pid: 2726 cpu: 0.2%
           4: mem: 17.2 MiB (0.2%) command: networkd-dispatcher started by: python3 pid: 1962
           cpu: 0.0%
           5: mem: 17.1 MiB (0.2%) command: multipathd pid: 1875 cpu: 0.0%
Info:      Processes: 150 Uptime: 26m Init: systemd v: 248 runlevel: 3 target: multi-user.target
           tool: systemctl Compilers: gcc: N/A Client: shell wrapper v: 5.1.8-release inxi: 3.3.08

Benchmark #51980 - Brand: SanDisk Ultra 3D NAND