Benchmark #5211 - pibenchmarks.com

Brand: Intenso Top M.2 SSD
SSD (M.2 SATA)
#134 / 1,700
143
#448 / 1,700
#432 / 989
#38 / 116
7,465
	Amazon.com Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2019-12-14 17:08:14
#5,211
5,045
-2,420 (-47.97%)
Anonymous
Intenso 128 GB SSD on Pi4

Storage Details
Intenso Top M.2 SSD
SSD (M.2 SATA)
128G
SSD
Intenso
SSDSATAIII
M.2
SATA
3.00
5,000
152d:0579
0x152d (JMicron Technology Corp. / JMicron USA Technology Corp.)
0x0579 (CX7220)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
2,147 (+647)
600 (+100)
4 GB
1,600

Operating System

Arch Linux ARM
armv7l

Benchmark Results
203 MB/s
185.21 MB/s
174.3 MB/s
4,109 IOPS
3,523 IOPS
16,439 KB/s
14,092 KB/s
17,555 KB/s
13,955 KB/s
11,761 KB/s
16,292 KB/s

inxi Results
System: Host: alarmpi Kernel: 5.4.3-1-ARCH armv7l bits: 32 compiler: gcc v: 8.3.0 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 usb-storage.quirks=152d:0579:u root=PARTUUID=a4b57300-01 rootfstype=ext4 rw rootwait console=ttyS0,115200 console=tty1 selinux=0 plymouth.enable=0 smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0 kgdboc=ttyS0,115200 elevator=noop audit=0 Desktop: LXQt 0.14.1 tk: Qt 5.13.2 info: lxqt-panel wm: Openbox 3.6.1 dm: LXDM Distro: Arch Linux ARM Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.81 GiB used: 591.0 MiB (15.1%) gpu: 64.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1545 Speed: 2147 MHz min/max: 600/2147 MHz Core speeds (MHz): 1: 2147 2: 2147 3: 2147 4: 2147 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.6 driver: fbdev unloaded: modesetting resolution: Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k5.4.3-1-ARCH Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: fd10:8079:cba3:1:dea6:32ff:fe58:3817/64 type: dynamic mngtmpaddr noprefixroute scope: global IP v6: 2003:cf:b3c2:d8e:dea6:32ff:fe58:3817/64 type: dynamic mngtmpaddr noprefixroute scope: global IP v6: fe80::dea6:32ff:fe58:3817/64 type: noprefixroute scope: link IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX WAN IP: 91.5.X.X Drives: Local Storage: total: 149.26 GiB used: 15.71 GiB (10.5%) ID-1: /dev/mmcblk0 model: USDU1 size: 30.01 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: Intenso model: Portable SSD size: 119.24 GiB block size: physical: 512 B logical: 512 B rev: 0506 scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 119.24 GiB size: 116.87 GiB (98.01%) used: 15.67 GiB (13.4%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A uuid: a78f94d0-bbd5-406a-8ef3-6ee16c730c23 ID-2: /boot raw size: 256.0 MiB size: 255.7 MiB (99.89%) used: 36.5 MiB (14.3%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: N/A uuid: 6884-0351 Unmounted: ID-1: /dev/mmcblk0p2 size: 256.0 MiB fs: vfat label: N/A uuid: 6884-0351 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: Microsoft Wheel Mouse Optical type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s chip ID: 045e:0040 Device-2: 1-1.4:4 info: Cherry G83 (RS 6000) Keyboard type: Keyboard driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s chip ID: 046a:0011 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-3: 2-1:2 info: JMicron / JMicron USA Portable SSD type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0579 Sensors: Message: No sensors data was found. Is sensors configured? Repos: Active pacman repo servers in: /etc/pacman.d/mirrorlist 1: http://eu.mirror.archlinuxarm.org/$arch/$repo Processes: CPU top: 5 1: cpu: 24.9% command: firefox pid: 681 mem: 244.4 MiB (6.3%) 2: cpu: 9.1% command: firefox pid: 616 mem: 291.9 MiB (7.5%) 3: cpu: 2.6% command: qterminal pid: 426 mem: 65.8 MiB (1.7%) 4: cpu: 2.5% command: xorg pid: 362 mem: 99.9 MiB (2.5%) 5: cpu: 0.6% command: sudo pid: 8604 mem: 4.91 MiB (0.1%) Memory top: 5 1: mem: 291.9 MiB (7.5%) command: firefox pid: 616 cpu: 9.1% 2: mem: 244.4 MiB (6.3%) command: firefox pid: 681 cpu: 24.9% 3: mem: 99.9 MiB (2.5%) command: xorg pid: 362 cpu: 2.5% 4: mem: 86.9 MiB (2.2%) command: firefox pid: 732 cpu: 0.5% 5: mem: 70.2 MiB (1.8%) command: pcmanfm-qt pid: 427 cpu: 0.1% Info: Processes: 143 Uptime: 6m Init: systemd v: 244 Compilers: gcc: 8.3.0 Shell: Storage.sh (sudo) running in: Storage.sh inxi: 3.0.37

inxi Results

System:
  Host: alarmpi Kernel: 5.4.3-1-ARCH armv7l bits: 32 compiler: gcc v: 8.3.0 
  parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M bcm2708_fb.fbwidth=1920 
  bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 
  smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
  vc_mem.mem_size=0x40000000 usb-storage.quirks=152d:0579:u 
  root=PARTUUID=a4b57300-01 rootfstype=ext4 rw rootwait console=ttyS0,115200 
  console=tty1 selinux=0 plymouth.enable=0 smsc95xx.turbo_mode=N 
  dwc_otg.lpm_enable=0 kgdboc=ttyS0,115200 elevator=noop audit=0 
  Desktop: LXQt 0.14.1 tk: Qt 5.13.2 info: lxqt-panel wm: Openbox 3.6.1 dm: LXDM 
  Distro: Arch Linux ARM 
Machine:
  Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 
  rev: c03112 
Memory:
  RAM: total: 3.81 GiB used: 591.0 MiB (15.1%) gpu: 64.0 MiB 
  RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots:
  ARM: No ARM data found for this feature. 
CPU:
  Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP 
  arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1545 
  Speed: 2147 MHz min/max: 600/2147 MHz Core speeds (MHz): 1: 2147 2: 2147 
  3: 2147 4: 2147 
  Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp 
  vfpd32 vfpv3 vfpv4 
  Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:
  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A 
  chip ID: brcm:soc 
  Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
  Display: server: X.org 1.20.6 driver: fbdev unloaded: modesetting 
  resolution:  
  Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:
  Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
  Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
  Sound Server: ALSA v: k5.4.3-1-ARCH 
Network:
  Message: No ARM data found for this feature. 
  IF-ID-1: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
  IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global 
  broadcast: 192.168.X.X 
  IP v6: fd10:8079:cba3:1:dea6:32ff:fe58:3817/64 
  type: dynamic mngtmpaddr noprefixroute scope: global 
  IP v6: 2003:cf:b3c2:d8e:dea6:32ff:fe58:3817/64 
  type: dynamic mngtmpaddr noprefixroute scope: global 
  IP v6: fe80::dea6:32ff:fe58:3817/64 type: noprefixroute scope: link 
  IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX 
  WAN IP: 91.5.X.X 
Drives:
  Local Storage: total: 149.26 GiB used: 15.71 GiB (10.5%) 
  ID-1: /dev/mmcblk0 model: USDU1 size: 30.01 GiB block size: physical: 512 B 
  logical: 512 B scheme: MBR 
  ID-2: /dev/sda type: USB vendor: Intenso model: Portable SSD size: 119.24 GiB 
  block size: physical: 512 B logical: 512 B rev: 0506 
  scheme: MBR 
  Message: No Optical or Floppy data was found. 
RAID:
  Message: No RAID data was found. 
Partition:
  ID-1: / raw size: 119.24 GiB size: 116.87 GiB (98.01%) used: 15.67 GiB (13.4%) 
  fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A 
  uuid: a78f94d0-bbd5-406a-8ef3-6ee16c730c23 
  ID-2: /boot raw size: 256.0 MiB size: 255.7 MiB (99.89%) 
  used: 36.5 MiB (14.3%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 
  label: N/A uuid: 6884-0351 
Unmounted:
  ID-1: /dev/mmcblk0p2 size: 256.0 MiB fs: vfat label: N/A uuid: 6884-0351 
USB:
  Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
  chip ID: 1d6b:0002 
  Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s 
  chip ID: 2109:3431 
  Device-1: 1-1.3:3 info: Microsoft Wheel Mouse Optical type: Mouse 
  driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s 
  chip ID: 045e:0040 
  Device-2: 1-1.4:4 info: Cherry G83 (RS 6000) Keyboard type: Keyboard 
  driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s 
  chip ID: 046a:0011 
  Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
  chip ID: 1d6b:0003 
  Device-3: 2-1:2 info: JMicron / JMicron USA Portable SSD type: Mass Storage 
  driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0579 Sensors:
  Message: No sensors data was found. Is sensors configured? 
Repos:
  Active pacman repo servers in: /etc/pacman.d/mirrorlist 
  1: http://eu.mirror.archlinuxarm.org/$arch/$repo
Processes:
  CPU top: 5 
  1: cpu: 24.9% command: firefox pid: 681 mem: 244.4 MiB (6.3%) 
  2: cpu: 9.1% command: firefox pid: 616 mem: 291.9 MiB (7.5%) 
  3: cpu: 2.6% command: qterminal pid: 426 mem: 65.8 MiB (1.7%) 
  4: cpu: 2.5% command: xorg pid: 362 mem: 99.9 MiB (2.5%) 
  5: cpu: 0.6% command: sudo pid: 8604 mem: 4.91 MiB (0.1%) 
  Memory top: 5 
  1: mem: 291.9 MiB (7.5%) command: firefox pid: 616 cpu: 9.1% 
  2: mem: 244.4 MiB (6.3%) command: firefox pid: 681 cpu: 24.9% 
  3: mem: 99.9 MiB (2.5%) command: xorg pid: 362 cpu: 2.5% 
  4: mem: 86.9 MiB (2.2%) command: firefox pid: 732 cpu: 0.5% 
  5: mem: 70.2 MiB (1.8%) command: pcmanfm-qt pid: 427 cpu: 0.1% 
Info:
  Processes: 143 Uptime: 6m Init: systemd v: 244 Compilers: gcc: 8.3.0 
  Shell: Storage.sh (sudo) running in: Storage.sh inxi: 3.0.37

Benchmark #5211 - Brand: Intenso Top M.2 SSD