Benchmark #52146 - pibenchmarks.com

Brand: Samsung eMMC (BJTD4)
MMC (Embedded)
#75 / 1,672
215
#748 / 1,672
#16 / 75
#16 / 92
5,675

Overview
2021-11-05 04:34:41
#52,146
5,195
-480 (-9.24%)
Beo
CM4 on Waveshare IO POE Board with 32gb EEMC. Fresh installation.

Storage Details
Samsung eMMC (BJTD4)
MMC (Embedded)
28.9G
MMC
Samsung
BJTD4
Embedded
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi Compute Module 4 1.0
Raspberry Pi Compute Module 4 Rev 1.0
Raspberry Pi Foundation
ARMv7 v7l
4
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
72.6 MB/s
78.17 MB/s
77.34 MB/s
9,078 IOPS
7,587 IOPS
36,312 KB/s
30,351 KB/s
18,304 KB/s
23,070 KB/s
18,106 KB/s
21,093 KB/s

inxi Results
System: Kernel: 5.10.63-v7l+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=354f45fe-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: pty pts/0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi Compute Module 4 Rev 1.0 details: BCM2711 rev: c03140 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.82 GiB used: 294.5 MiB (7.5%) gpu: 76 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 3 bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: X.org 1.20.4 driver: loaded: fbdev unloaded: modesetting tty: 80x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.63-v7l+ running: yes Sound Server-2: JACK v: 1.9.12 running: no Sound Server-3: PulseAudio v: 12.2 running: no Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: down mac: Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 29.12 GiB used: 7.95 GiB (27.3%) ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: Samsung model: BJTD4R size: 29.12 GiB block-size: physical: 512 B logical: 512 B type: SSD rev: 0x8 scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. Message: No optical or floppy data found. Partition: ID-1: / raw-size: 28.87 GiB size: 28.36 GiB (98.24%) used: 7.9 GiB (27.9%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs uuid: 075b0d0c-7b1e-4855-9547-125591698723 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.1 MiB (19.1%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: B05C-D0C4 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Hub-4: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 2053 lib: 941 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 140 1: cpu: 2.1% command: init pid: 1 mem: 8.06 MiB (0.2%) 2: cpu: 0.2% command: systemd-journald pid: 122 mem: 6.73 MiB (0.1%) 3: cpu: 0.2% command: systemd-udevd pid: 155 mem: 3.91 MiB (0.1%) 4: cpu: 0.2% command: dbus-daemon pid: 385 mem: 3.58 MiB (0.0%) 5: cpu: 0.2% command: bash pid: 730 mem: 2.74 MiB (0.0%) Memory top: 5 of 140 1: mem: 12.8 MiB (0.3%) command: packagekitd pid: 873 cpu: 0.2% 2: mem: 11.6 MiB (0.3%) command: colord pid: 544 cpu: 0.1% 3: mem: 8.82 MiB (0.2%) command: cups-browsed pid: 443 cpu: 0.1% 4: mem: 8.32 MiB (0.2%) command: cupsd pid: 410 cpu: 0.0% 5: mem: 8.06 MiB (0.2%) command: init pid: 1 cpu: 2.1% Info: Processes: 140 Uptime: 4m Init: systemd v: 241 runlevel: 3 target: multi-user.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.08

inxi Results

System:    Kernel: 5.10.63-v7l+ armv7l bits: 32 compiler: N/A
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0
           snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=354f45fe-02
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash
           plymouth.ignore-serial-consoles
           Console: pty pts/0 Distro: Raspbian GNU/Linux 10 (buster)
Machine:   Type: ARM Device System: Raspberry Pi Compute Module 4 Rev 1.0 details: BCM2711
           rev: c03140 Battery:   Message: No system battery data found. Is one present?
Memory:    RAM: total: 3.82 GiB used: 294.5 MiB (7.5%) gpu: 76 MiB
           RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots: ARM: No ARM data found for this feature.
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l
           family: 7 model-id: 0 stepping: 3 bogomips: 1080
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500
           4: 1500
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32
           vfpv3 vfpv4
           Vulnerabilities: No CPU vulnerability/bugs data available.
Graphics:  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu
           class-ID: gpu
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Display: server: X.org 1.20.4 driver: loaded: fbdev unloaded: modesetting tty: 80x24
           Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio
           class-ID: bcm2835_audio
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Sound Server-1: ALSA v: k5.10.63-v7l+ running: yes
           Sound Server-2: JACK v: 1.9.12 running: no
           Sound Server-3: PulseAudio v: 12.2 running: no
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A
           chip-ID: brcm:fe300000 class-ID: mmcnr
           IF: wlan0 state: down mac: 
           Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A
           chip-ID: brcm:fd580000 class-ID: ethernet
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 
           IP v4:  type: dynamic noprefixroute scope: global broadcast: 
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global
           IP v6:  scope: link
           WAN IP: 
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
           Report: hciconfig ID: hci0 rfk-id: 1 state: up address:  bt-v: 3.0 lmp-v: 5.0
           sub-v: 6119 hci-v: 5.0 rev: 156
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept
Logical:   Message: No logical block device data found.
RAID:      Message: No RAID data found.
Drives:    Local Storage: total: 29.12 GiB used: 7.95 GiB (27.3%)
           ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: Samsung model: BJTD4R size: 29.12 GiB
           block-size: physical: 512 B logical: 512 B type: SSD rev: 0x8
           scheme: MBR
           SMART Message: Unknown smartctl error. Unable to generate data.
           Message: No optical or floppy data found.
Partition: ID-1: / raw-size: 28.87 GiB size: 28.36 GiB (98.24%) used: 7.9 GiB (27.9%) fs: ext4
           block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs
           uuid: 075b0d0c-7b1e-4855-9547-125591698723
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.1 MiB (19.1%) fs: vfat
           block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: B05C-D0C4
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
           ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap
Unmounted: Message: No unmounted partitions found.
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s
           chip-ID: 1d6b:0002 class-ID: 0900
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA
           chip-ID: 2109:3431 class-ID: 0900
           Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s
           chip-ID: 1d6b:0003 class-ID: 0900
           Hub-4: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s
           chip-ID: 1d6b:0002 class-ID: 0900
Sensors:   Missing: Required tool sensors not installed. Check --recommends
Repos:     Packages: apt: 2053 lib: 941
           Active apt repos in: /etc/apt/sources.list
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           No active apt repos in: /etc/apt/sources.list.d/vscode.list
Processes: CPU top: 5 of 140
           1: cpu: 2.1% command: init pid: 1 mem: 8.06 MiB (0.2%)
           2: cpu: 0.2% command: systemd-journald pid: 122 mem: 6.73 MiB (0.1%)
           3: cpu: 0.2% command: systemd-udevd pid: 155 mem: 3.91 MiB (0.1%)
           4: cpu: 0.2% command: dbus-daemon pid: 385 mem: 3.58 MiB (0.0%)
           5: cpu: 0.2% command: bash pid: 730 mem: 2.74 MiB (0.0%)
           Memory top: 5 of 140
           1: mem: 12.8 MiB (0.3%) command: packagekitd pid: 873 cpu: 0.2%
           2: mem: 11.6 MiB (0.3%) command: colord pid: 544 cpu: 0.1%
           3: mem: 8.82 MiB (0.2%) command: cups-browsed pid: 443 cpu: 0.1%
           4: mem: 8.32 MiB (0.2%) command: cupsd pid: 410 cpu: 0.0%
           5: mem: 8.06 MiB (0.2%) command: init pid: 1 cpu: 2.1%
Info:      Processes: 140 Uptime: 4m Init: systemd v: 241 runlevel: 3 target: multi-user.target
           tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release
           inxi: 3.3.08

Benchmark #52146 - Brand: Samsung eMMC (BJTD4)