Benchmark #52158 - pibenchmarks.com

Brand: SanDisk SD Ultra A1 (SL16G)
A1 C10 U1
#84 / 1,700
231
#1,365 / 1,700
#226 / 404
1,134
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-11-05 13:31:56
#52,158
1,279
+145 (+11.34%)
Anonymous

Secure Digital (SD) Card Details
SanDisk SD Ultra A1 (SL16G)
A1 C10 U1
14.5G
SD
SanDisk
SL16G
SDHC
5.00
0x03
SD
8.0
01/2019
Class 10
A1
U1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
N/A
4
1,500
500
1,600
42 (-9)

Operating System

Debian GNU/Linux 11 (bullseye)
aarch64

Benchmark Results
13 MB/s
36.91 MB/s
31.21 MB/s
1,001 IOPS
2,649 IOPS
4,006 KB/s
10,599 KB/s
10,736 KB/s
4,564 KB/s
8,640 KB/s
4,418 KB/s

inxi Results
System: Kernel: 5.10.0-9-arm64 aarch64 bits: 64 compiler: gcc v: 10.2.1 parameters: video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 dma.dmachans=0x37f5 bcm2709.boardrev=0xd03114 bcm2709.serial=0x64944511 bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty0 console=ttyS1,115200 root=/dev/mmcblk1p2 rw fsck.repair=yes net.ifnames=0 rootwait Console: tty 1 Distro: Debian GNU/Linux 11 (bullseye) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: N/A Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 7.63 GiB used: 362.9 MiB (4.6%) RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: No display server data found. Headless machine? tty: 240x67 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Sound Server-1: ALSA v: k5.10.0-9-arm64 running: yes Network: Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: down mac: Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq IF-ID-1: wlan0 state: up mac: IP v4: type: dynamic scope: global broadcast: IP v6: type: dynamic mngtmpaddr scope: global IP v6: scope: link WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: hardware: no software: no address: see --recommends Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial Report: This feature requires one of these tools: hciconfig/bt-adapter Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 247.72 GiB used: 7.27 GiB (2.9%) ID-1: /dev/mmcblk1 maj-min: 179:0 vendor: SanDisk model: SL16G size: 14.84 GiB block-size: physical: 512 B logical: 512 B type: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Samsung model: SSD 850 EVO 250GB family: based SSDs size: 232.89 GiB block-size: physical: 512 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s type: SSD rev: EMT01B6Q temp: 32 C scheme: MBR SMART: yes state: enabled health: PASSED on: 2y 31d 2h cycles: 2165 written: 45.42 TiB Message: No optical or floppy data found. Partition: ID-1: / raw-size: 14.54 GiB size: 14.3 GiB (98.31%) used: 3.62 GiB (25.3%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk1p2 maj-min: 179:2 label: RASPIROOT uuid: 899ea962-703a-49b8-926a-33b14329c638 ID-2: /boot/firmware raw-size: 296 MiB size: 295.8 MiB (99.93%) used: 126 MiB (42.6%) fs: vfat block-size: 512 B dev: /dev/mmcblk1p1 maj-min: 179:1 label: RASPIFIRM uuid: 7F54-1442 ID-3: /mnt/ssd raw-size: 232.59 GiB size: 229.14 GiB (98.51%) used: 3.53 GiB (1.5%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT uuid: 899ea962-703a-49b8-926a-33b14329c638 Swap: Alert: No swap data was found. Unmounted: ID-1: /dev/sda1 maj-min: 8:1 size: 296 MiB fs: vfat label: RASPIFIRM uuid: 7F54-1442 USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Device-1: 1-1.3:3 info: Microsoft Wired Keyboard 600 (model 1576) type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s power: 100mA chip-ID: 045e:07f8 class-ID: 0300 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-2:2 info: ASMedia ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s chip-ID: 174c:55aa class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 622 lib: 399 Active apt repos in: /etc/apt/sources.list 1: deb http: //deb.debian.org/debian bullseye main contrib non-free 2: deb http: //security.debian.org/debian-security bullseye-security main contrib non-free Processes: CPU top: 5 of 131 1: cpu: 1.3% command: [kworker/u8:2-events_unbound] pid: 981 mem: 0.00 MiB (0.0%) 2: cpu: 1.0% command: init pid: 1 mem: 9.82 MiB (0.1%) 3: cpu: 0.2% command: smartd pid: 1598 mem: 5.18 MiB (0.0%) 4: cpu: 0.1% command: [kworker/0:1-mm_percpu_wq] pid: 769 mem: 0.00 MiB (0.0%) 5: cpu: 0.1% command: bash pid: 961 mem: 2.86 MiB (0.0%) Memory top: 5 of 131 1: mem: 13.6 MiB (0.1%) command: systemd-journald pid: 211 cpu: 0.0% 2: mem: 10.9 MiB (0.1%) command: systemd-resolved pid: 385 cpu: 0.0% 3: mem: 9.82 MiB (0.1%) command: init pid: 1 cpu: 1.0% 4: mem: 7.56 MiB (0.0%) command: sshd: pid: 734 cpu: 0.0% 5: mem: 7.32 MiB (0.0%) command: systemd pid: 654 cpu: 0.0% Info: Processes: 131 Uptime: 14m Init: systemd v: 247 runlevel: 5 tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.08

inxi Results

System:    Kernel: 5.10.0-9-arm64 aarch64 bits: 64 compiler: gcc v: 10.2.1
           parameters: video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48
           dma.dmachans=0x37f5 bcm2709.boardrev=0xd03114 bcm2709.serial=0x64944511
           bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000
           vc_mem.mem_size=0x40000000 console=tty0 console=ttyS1,115200 root=/dev/mmcblk1p2 rw
           fsck.repair=yes net.ifnames=0 rootwait
           Console: tty 1 Distro: Debian GNU/Linux 11 (bullseye)
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: N/A Battery:   Message: No system battery data found. Is one present?
Memory:    RAM: total: 7.63 GiB used: 362.9 MiB (4.6%)
           RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots: ARM: No ARM data found for this feature.
CPU:       Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8
           model-id: 0 stepping: 3 bogomips: 432
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600
           Features: asimd cpuid crc32 evtstrm fp
           Vulnerabilities: Type: itlb_multihit status: Not affected
           Type: l1tf status: Not affected
           Type: mds status: Not affected
           Type: meltdown status: Not affected
           Type: spec_store_bypass status: Vulnerable
           Type: spectre_v1 mitigation: __user pointer sanitization
           Type: spectre_v2 status: Vulnerable
           Type: srbds status: Not affected
           Type: tsx_async_abort status: Not affected
Graphics:  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700
           class-ID: hdmi
           Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700
           class-ID: hdmi
           Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu
           class-ID: gpu
           Display: server: No display server data found. Headless machine? tty: 240x67
           Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:     Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700
           class-ID: hdmi
           Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700
           class-ID: hdmi
           Sound Server-1: ALSA v: k5.10.0-9-arm64 running: yes
Network:   Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A
           chip-ID: brcm:fd580000 class-ID: ethernet
           IF: eth0 state: down mac: 
           Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A
           chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq
           IF-ID-1: wlan0 state: up mac: 
           IP v4:  type: dynamic scope: global broadcast: 
           IP v6:  type: dynamic mngtmpaddr scope: global
           IP v6:  scope: link
           WAN IP: 
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
           Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block:
           hardware: no software: no address: see --recommends
           Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial
           Report: This feature requires one of these tools: hciconfig/bt-adapter
Logical:   Message: No logical block device data found.
RAID:      Message: No RAID data found.
Drives:    Local Storage: total: 247.72 GiB used: 7.27 GiB (2.9%)
           ID-1: /dev/mmcblk1 maj-min: 179:0 vendor: SanDisk model: SL16G size: 14.84 GiB
           block-size: physical: 512 B logical: 512 B type: SSD scheme: MBR
           SMART Message: Unknown smartctl error. Unable to generate data.
           ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Samsung model: SSD 850 EVO 250GB
           family: based SSDs size: 232.89 GiB block-size: physical: 512 B logical: 512 B
           sata: 3.1 speed: 6.0 Gb/s type: SSD rev: EMT01B6Q temp: 32 C
           scheme: MBR
           SMART: yes state: enabled health: PASSED on: 2y 31d 2h cycles: 2165 written: 45.42 TiB
           Message: No optical or floppy data found.
Partition: ID-1: / raw-size: 14.54 GiB size: 14.3 GiB (98.31%) used: 3.62 GiB (25.3%) fs: ext4
           block-size: 4096 B dev: /dev/mmcblk1p2 maj-min: 179:2 label: RASPIROOT
           uuid: 899ea962-703a-49b8-926a-33b14329c638
           ID-2: /boot/firmware raw-size: 296 MiB size: 295.8 MiB (99.93%) used: 126 MiB (42.6%)
           fs: vfat block-size: 512 B dev: /dev/mmcblk1p1 maj-min: 179:1 label: RASPIFIRM
           uuid: 7F54-1442
           ID-3: /mnt/ssd raw-size: 232.59 GiB size: 229.14 GiB (98.51%) used: 3.53 GiB (1.5%)
           fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT
           uuid: 899ea962-703a-49b8-926a-33b14329c638
Swap:      Alert: No swap data was found.
Unmounted: ID-1: /dev/sda1 maj-min: 8:1 size: 296 MiB fs: vfat label: RASPIFIRM uuid: 7F54-1442
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s
           chip-ID: 1d6b:0002 class-ID: 0900
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA
           chip-ID: 2109:3431 class-ID: 0900
           Device-1: 1-1.3:3 info: Microsoft Wired Keyboard 600 (model 1576) type: Keyboard,HID
           driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s power: 100mA
           chip-ID: 045e:07f8 class-ID: 0300
           Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s
           chip-ID: 1d6b:0003 class-ID: 0900
           Device-1: 2-2:2 info: ASMedia ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge
           ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge
           type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s chip-ID: 174c:55aa
           class-ID: 0806 Sensors:   Missing: Required tool sensors not installed. Check --recommends
Repos:     Packages: apt: 622 lib: 399
           Active apt repos in: /etc/apt/sources.list
           1: deb http: //deb.debian.org/debian bullseye main contrib non-free
           2: deb http: //security.debian.org/debian-security bullseye-security main contrib non-free
Processes: CPU top: 5 of 131
           1: cpu: 1.3% command: [kworker/u8:2-events_unbound] pid: 981 mem: 0.00 MiB (0.0%)
           2: cpu: 1.0% command: init pid: 1 mem: 9.82 MiB (0.1%)
           3: cpu: 0.2% command: smartd pid: 1598 mem: 5.18 MiB (0.0%)
           4: cpu: 0.1% command: [kworker/0:1-mm_percpu_wq] pid: 769 mem: 0.00 MiB (0.0%)
           5: cpu: 0.1% command: bash pid: 961 mem: 2.86 MiB (0.0%)
           Memory top: 5 of 131
           1: mem: 13.6 MiB (0.1%) command: systemd-journald pid: 211 cpu: 0.0%
           2: mem: 10.9 MiB (0.1%) command: systemd-resolved pid: 385 cpu: 0.0%
           3: mem: 9.82 MiB (0.1%) command: init pid: 1 cpu: 1.0%
           4: mem: 7.56 MiB (0.0%) command: sshd: pid: 734 cpu: 0.0%
           5: mem: 7.32 MiB (0.0%) command: systemd pid: 654 cpu: 0.0%
Info:      Processes: 131 Uptime: 14m Init: systemd v: 247 runlevel: 5 tool: systemctl Compilers:
           gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.08

Benchmark #52158 - Brand: SanDisk SD Ultra A1 (SL16G)