Benchmark #52351 - pibenchmarks.com

Brand: Silicon Power A55 M.2 Series
SSD (M.2 SATA)
#138 / 1,700
138
#492 / 1,700
#473 / 989
#50 / 116
7,141
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-11-10 09:04:03
#52,351
4,277
-2,864 (-66.96%)
Anonymous
Silicon Power 1TB M.2 SSD

Storage Details
Silicon Power A55 M.2 Series
SSD (M.2 SATA)
1024G
SSD
SP
M.2SSD
M.2
SATA
3.00
5,000
174c:55aa
0x174c (ASMedia Technology Inc.)
0x55aa (ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
ARMv7 v7l
4
1,750 (+250)
600 (+100)
1,600

Operating System

Raspbian GNU/Linux 11 (bullseye)
armv7l

Benchmark Results
73 MB/s
182.72 MB/s
171.12 MB/s
3,103 IOPS
6,813 IOPS
12,414 KB/s
27,252 KB/s
19,157 KB/s
13,444 KB/s
14,527 KB/s
20,403 KB/s

inxi Results
System: Host: raspberrypi Kernel: 5.10.63-v7l+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:2560x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=2ea733ae-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: pty pts/0 wm: Mutter 3.38.6 DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 11 (bullseye) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2711 rev: c03111 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.82 GiB used: 1004.2 MiB (25.6%) gpu: 256 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 3 bogomips: 1296 Speed: 1800 MHz min/max: 600/1800 MHz Core speeds (MHz): 1: 1800 2: 1800 3: 1800 4: 1800 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: X.Org 1.20.11 compositor: mutter v: 3.38.6 driver: loaded: modesetting unloaded: fbdev display-ID: :0 screens: 1 Screen-1: 0 s-res: 3840x2160 s-dpi: 96 s-size: 1016x572mm (40.0x22.5") s-diag: 1166mm (45.9") Monitor-1: HDMI-1 res: 3840x2160 hz: 60 dpi: 61 size: 1600x900mm (63.0x35.4") diag: 1836mm (72.3") Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Sound Server-1: ALSA v: k5.10.63-v7l+ running: yes Sound Server-2: PulseAudio v: 14.2 running: yes Sound Server-3: PipeWire v: 0.3.19 running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: up mac: XX:XX:XX:XX:XX:XX IP v4: 10.0.X.X/24 type: dynamic noprefixroute scope: global broadcast: 10.0.X.X IP v6: 2604:3d09:989:a800::b9e/128 type: dynamic noprefixroute scope: global IP v6: 2604:3d09:989:a800:4cfa:6cc4:bd44:662b/64 type: dynamic mngtmpaddr noprefixroute scope: global IP v6: fe80::cc51:367a:f5dd:f625/64 scope: link Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: down mac: XX:XX:XX:XX:XX:XX WAN IP: 24.64.X.X Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: XX:XX:XX:XX:XX:XX bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept service-classes: rendering, capturing, audio Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 953.87 GiB used: 5.83 GiB (0.6%) ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Silicon Power model: SPCC M.2 SSD size: 953.87 GiB block-size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s type: SSD rev: T0805A0 temp: 40 C scheme: MBR SMART: yes state: enabled health: PASSED on: 13 hrs cycles: 33 read: 387 KiB written: 807 KiB Message: No optical or floppy data found. Partition: ID-1: / raw-size: 953.62 GiB size: 937.57 GiB (98.32%) used: 5.79 GiB (0.6%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: 1232a209-2596-48f0-a078-731d10b918ad ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.7 MiB (19.3%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: E183-6233 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 1-1.4:3 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 100mA chip-ID: 05e3:0610 class-ID: 0900 Device-1: 1-1.4.1:4 info: Holtek Wired Keyboard (78/79 key) [RPI Wired Keyboard 5] type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s power: 100mA chip-ID: 04d9:0006 class-ID: 0300 Device-2: 1-1.4.4:5 info: Pixart Imaging Optical Mouse type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s power: 100mA chip-ID: 093a:2510 class-ID: 0301 Hub-4: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-1:2 info: ASMedia ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip-ID: 174c:55aa class-ID: 0806 Hub-5: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-6: 3-1:2 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 100mA chip-ID: 05e3:0608 class-ID: 0900 Device-1: 3-1.1:3 info: QinHeng CH340 serial converter type: driver: ch341,ch341-uart interfaces: 1 rev: 1.1 speed: 12 Mb/s power: 98mA chip-ID: 1a86:7523 class-ID: ff00 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 1627 lib: 941 Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ bullseye main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 185 1: cpu: 1.6% command: xorg pid: 689 mem: 153.6 MiB (4.1%) 2: cpu: 1.0% command: packagekitd pid: 1209 mem: 19.0 MiB (0.5%) 3: cpu: 1.0% command: sed pid: 7108 mem: 0.68 MiB (0.0%) 4: cpu: 0.8% command: mutter pid: 911 mem: 67.2 MiB (1.8%) 5: cpu: 0.7% command: lxpanel pid: 917 mem: 62.0 MiB (1.6%) Memory top: 5 of 185 1: mem: 153.6 MiB (4.1%) command: xorg pid: 689 cpu: 1.6% 2: mem: 128.8 MiB (3.5%) command: pcmanfm pid: 918 cpu: 0.6% 3: mem: 67.2 MiB (1.8%) command: mutter pid: 911 cpu: 0.8% 4: mem: 62.0 MiB (1.6%) command: lxpanel pid: 917 cpu: 0.7% 5: mem: 42.5 MiB (1.1%) command: vncserver-x11-core pid: 650 cpu: 0.0% Info: Processes: 185 Uptime: 15m Init: systemd v: 247 runlevel: 5 target: graphical.target tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Shell: Storage.sh (sudo) default: Bash v: 5.1.4 running-in: Storage.sh inxi: 3.3.08

inxi Results

System:    Host: raspberrypi Kernel: 5.10.63-v7l+ armv7l bits: 32 compiler: N/A
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0
           snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:2560x1080M@60
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000
           vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1
           root=PARTUUID=2ea733ae-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash
           plymouth.ignore-serial-consoles
           Console: pty pts/0 wm: Mutter 3.38.6 DM: LightDM 1.26.0
           Distro: Raspbian GNU/Linux 11 (bullseye)
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2711
           rev: c03111 Battery:   Message: No system battery data found. Is one present?
Memory:    RAM: total: 3.82 GiB used: 1004.2 MiB (25.6%) gpu: 256 MiB
           RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots: ARM: No ARM data found for this feature.
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l
           family: 7 model-id: 0 stepping: 3 bogomips: 1296
           Speed: 1800 MHz min/max: 600/1800 MHz Core speeds (MHz): 1: 1800 2: 1800 3: 1800
           4: 1800
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp
           vfpd32 vfpv3 vfpv4
           Vulnerabilities: No CPU vulnerability/bugs data available.
Graphics:  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A
           chip-ID: brcm:fef00700 class-ID: hdmi
           Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A
           chip-ID: brcm:fef05700 class-ID: hdmi
           Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu
           class-ID: gpu
           Display: server: X.Org 1.20.11 compositor: mutter v: 3.38.6 driver:
           loaded: modesetting unloaded: fbdev display-ID: :0 screens: 1
           Screen-1: 0 s-res: 3840x2160 s-dpi: 96 s-size: 1016x572mm (40.0x22.5")
           s-diag: 1166mm (45.9")
           Monitor-1: HDMI-1 res: 3840x2160 hz: 60 dpi: 61 size: 1600x900mm (63.0x35.4")
           diag: 1836mm (72.3")
           Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:     Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700
           class-ID: hdmi
           Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700
           class-ID: hdmi
           Device-3: bcm2835-audio driver: bcm2835_audio bus-ID: N/A
           chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio
           Sound Server-1: ALSA v: k5.10.63-v7l+ running: yes
           Sound Server-2: PulseAudio v: 14.2 running: yes
           Sound Server-3: PipeWire v: 0.3.19 running: yes
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A
           chip-ID: brcm:fe300000 class-ID: mmcnr
           IF: wlan0 state: up mac: XX:XX:XX:XX:XX:XX
           IP v4: 10.0.X.X/24 type: dynamic noprefixroute scope: global
           broadcast: 10.0.X.X
           IP v6: 2604:3d09:989:a800::b9e/128 type: dynamic noprefixroute scope: global
           IP v6: 2604:3d09:989:a800:4cfa:6cc4:bd44:662b/64
           type: dynamic mngtmpaddr noprefixroute scope: global
           IP v6: fe80::cc51:367a:f5dd:f625/64 scope: link
           Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A
           chip-ID: brcm:fd580000 class-ID: ethernet
           IF: eth0 state: down mac: XX:XX:XX:XX:XX:XX
           WAN IP: 24.64.X.X
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000
           class-ID: serial
           Report: hciconfig ID: hci0 rfk-id: 1 state: up address: XX:XX:XX:XX:XX:XX
           bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff
           link-mode: slave accept service-classes: rendering, capturing, audio
Logical:   Message: No logical block device data found.
RAID:      Message: No RAID data found.
Drives:    Local Storage: total: 953.87 GiB used: 5.83 GiB (0.6%)
           ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Silicon Power model: SPCC M.2 SSD
           size: 953.87 GiB block-size: physical: 512 B logical: 512 B sata: 3.2
           speed: 6.0 Gb/s type: SSD rev: T0805A0 temp: 40 C
           scheme: MBR
           SMART: yes state: enabled health: PASSED on: 13 hrs cycles: 33 read: 387 KiB
           written: 807 KiB
           Message: No optical or floppy data found.
Partition: ID-1: / raw-size: 953.62 GiB size: 937.57 GiB (98.32%) used: 5.79 GiB (0.6%)
           fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs
           uuid: 1232a209-2596-48f0-a078-731d10b918ad
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.7 MiB (19.3%)
           fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot
           uuid: E183-6233
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
           ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2
           file: /var/swap
Unmounted: Message: No unmounted partitions found.
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s
           chip-ID: 1d6b:0002 class-ID: 0900
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA
           chip-ID: 2109:3431 class-ID: 0900
           Hub-3: 1-1.4:3 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s
           power: 100mA chip-ID: 05e3:0610 class-ID: 0900
           Device-1: 1-1.4.1:4
           info: Holtek Wired Keyboard (78/79 key) [RPI Wired Keyboard 5] type: Keyboard,HID
           driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s power: 100mA
           chip-ID: 04d9:0006 class-ID: 0300
           Device-2: 1-1.4.4:5 info: Pixart Imaging Optical Mouse type: Mouse
           driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s power: 100mA
           chip-ID: 093a:2510 class-ID: 0301
           Hub-4: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s
           chip-ID: 1d6b:0003 class-ID: 0900
           Device-1: 2-1:2 info: ASMedia ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s
           chip-ID: 174c:55aa class-ID: 0806            Hub-5: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s
           chip-ID: 1d6b:0002 class-ID: 0900
           Hub-6: 3-1:2 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s
           power: 100mA chip-ID: 05e3:0608 class-ID: 0900
           Device-1: 3-1.1:3 info: QinHeng CH340 serial converter type: 
           driver: ch341,ch341-uart interfaces: 1 rev: 1.1 speed: 12 Mb/s power: 98mA
           chip-ID: 1a86:7523 class-ID: ff00
Sensors:   Missing: Required tool sensors not installed. Check --recommends
Repos:     Packages: apt: 1627 lib: 941
           Active apt repos in: /etc/apt/sources.list
           1: deb http://raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list
           1: deb http://archive.raspberrypi.org/debian/ bullseye main
           No active apt repos in: /etc/apt/sources.list.d/vscode.list
Processes: CPU top: 5 of 185
           1: cpu: 1.6% command: xorg pid: 689 mem: 153.6 MiB (4.1%)
           2: cpu: 1.0% command: packagekitd pid: 1209 mem: 19.0 MiB (0.5%)
           3: cpu: 1.0% command: sed pid: 7108 mem: 0.68 MiB (0.0%)
           4: cpu: 0.8% command: mutter pid: 911 mem: 67.2 MiB (1.8%)
           5: cpu: 0.7% command: lxpanel pid: 917 mem: 62.0 MiB (1.6%)
           Memory top: 5 of 185
           1: mem: 153.6 MiB (4.1%) command: xorg pid: 689 cpu: 1.6%
           2: mem: 128.8 MiB (3.5%) command: pcmanfm pid: 918 cpu: 0.6%
           3: mem: 67.2 MiB (1.8%) command: mutter pid: 911 cpu: 0.8%
           4: mem: 62.0 MiB (1.6%) command: lxpanel pid: 917 cpu: 0.7%
           5: mem: 42.5 MiB (1.1%) command: vncserver-x11-core pid: 650 cpu: 0.0%
Info:      Processes: 185 Uptime: 15m Init: systemd v: 247 runlevel: 5
           target: graphical.target tool: systemctl Compilers: gcc: 10.2.1 alt: 10
           Shell: Storage.sh (sudo) default: Bash v: 5.1.4 running-in: Storage.sh
           inxi: 3.3.08

Benchmark #52351 - Brand: Silicon Power A55 M.2 Series