Benchmark #5250 - pibenchmarks.com

Brand: Toshiba Canvio 2.5" MQ Series
HDD (2.5" SATA)
#148 / 1,700
121
#1,103 / 1,700
#24 / 69
#2 / 20
1,999
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2019-12-15 14:04:05
#5,250
887
-1,112 (-125.37%)
Anonymous

Storage Details
Toshiba Canvio 2.5" MQ Series
HDD (2.5" SATA)
2000G
HDD
Toshiba
MQ01UBB200
2.5 inch
SATA
5,400
1d6b:a202
0x1d6b (Linux Foundation)
0xa202 (Canvio Basics HDD)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
550 (+50)
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
54 MB/s
54.78 MB/s
44.53 MB/s
174 IOPS
122 IOPS
698 KB/s
491 KB/s
12,756 KB/s
10,683 KB/s
466 KB/s
588 KB/s

inxi Results
System: Host: eigencloud Kernel: 4.19.75-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=bfc4d5d0-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: N/A dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 404.1 MiB (10.1%) gpu: 128.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 154x36 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.75-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: noprefixroute scope: global broadcast: 192.168.X.X IP v6: fd9c:eef8:b3d5::12a/128 type: noprefixroute scope: global IP v6: fd9c:eef8:b3d5:0:acec:8eac:d94a:cfdf/64 type: mngtmpaddr noprefixroute scope: global IP v6: fe80::4be0:982f:ca8f:8d8/64 scope: link IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX WAN IP: 185.33.X.X Drives: Local Storage: total: 1.85 TiB used: 147.24 GiB (7.8%) ID-1: /dev/mmcblk0 model: SD size: 29.44 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: Toshiba model: External USB 3.0 size: 1.82 TiB block size: physical: 512 B logical: 512 B rev: 5438 scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 28.00 GiB size: 27.43 GiB (97.98%) used: 2.29 GiB (8.3%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: usbroot uuid: 510427d5-eee9-468d-8ee9-da0c45a98730 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.8 MiB (20.5%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: F661-303B ID-3: /usbspace raw size: 1.79 TiB size: 1.76 TiB (98.42%) used: 144.90 GiB (8.0%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: store2 uuid: 96459dfa-be50-435b-9c9e-57c7b116d20a ID-4: swap-1 size: 4.00 GiB used: 0 KiB (0.0%) fs: swap swappiness: 60 (default) cache pressure: 100 (default) dev: /dev/sda3 label: usbswap uuid: 102eeeff-e933-459c-8fb9-ed9e5ef3a41b Unmounted: ID-1: /dev/mmcblk0p2 size: 29.18 GiB fs: ext4 label: rootfs uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: Toshiba America Canvio Basics HDD type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0480:a202 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 0.3% command: init pid: 1 mem: 8.01 MiB (0.2%) 2: cpu: 0.2% command: haveged pid: 336 mem: 4.23 MiB (0.1%) 3: cpu: 0.2% command: mysqld pid: 917 mem: 115.8 MiB (3.0%) 4: cpu: 0.2% command: redis-server pid: 1445 mem: 4.66 MiB (0.1%) 5: cpu: 0.1% command: [rcu_sched] pid: 10 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 115.8 MiB (3.0%) command: mysqld pid: 917 cpu: 0.2% 2: mem: 27.9 MiB (0.7%) command: php-fpm: pid: 773 cpu: 0.0% 3: mem: 15.7 MiB (0.4%) command: unattended-upgrade-shutdown started by: python3 pid: 763 cpu: 0.0% 4: mem: 8.77 MiB (0.2%) command: udisksd pid: 376 cpu: 0.0% 5: mem: 8.01 MiB (0.2%) command: init pid: 1 cpu: 0.3% Info: Processes: 137 Uptime: 19m Init: systemd v: 241 runlevel: 5 Compilers: gcc: N/A alt: 8 Shell: benchmark.sh inxi: 3.0.37

inxi Results

System:    Host: eigencloud Kernel: 4.19.75-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 
           root=PARTUUID=bfc4d5d0-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: N/A dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
Memory:    RAM: total: 3.89 GiB used: 404.1 MiB (10.1%) gpu: 128.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A 
           stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 154x36 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.75-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: noprefixroute scope: global broadcast: 192.168.X.X 
           IP v6: fd9c:eef8:b3d5::12a/128 type: noprefixroute scope: global 
           IP v6: fd9c:eef8:b3d5:0:acec:8eac:d94a:cfdf/64 type: mngtmpaddr noprefixroute scope: global 
           IP v6: fe80::4be0:982f:ca8f:8d8/64 scope: link 
           IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX 
           WAN IP: 185.33.X.X 
Drives:    Local Storage: total: 1.85 TiB used: 147.24 GiB (7.8%) 
           ID-1: /dev/mmcblk0 model: SD size: 29.44 GiB block size: physical: 512 B logical: 512 B 
           scheme: MBR 
           ID-2: /dev/sda type: USB vendor: Toshiba model: External USB 3.0 size: 1.82 TiB block size: physical: 512 B 
           logical: 512 B rev: 5438 scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 28.00 GiB size: 27.43 GiB (97.98%) used: 2.29 GiB (8.3%) fs: ext4 block size: 4096 B 
           dev: /dev/sda2 label: usbroot uuid: 510427d5-eee9-468d-8ee9-da0c45a98730 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.8 MiB (20.5%) fs: vfat block size: 512 B 
           dev: /dev/mmcblk0p1 label: boot uuid: F661-303B 
           ID-3: /usbspace raw size: 1.79 TiB size: 1.76 TiB (98.42%) used: 144.90 GiB (8.0%) fs: ext4 block size: 4096 B 
           dev: /dev/sda1 label: store2 uuid: 96459dfa-be50-435b-9c9e-57c7b116d20a 
           ID-4: swap-1 size: 4.00 GiB used: 0 KiB (0.0%) fs: swap swappiness: 60 (default) cache pressure: 100 (default) 
           dev: /dev/sda3 label: usbswap uuid: 102eeeff-e933-459c-8fb9-ed9e5ef3a41b 
Unmounted: ID-1: /dev/mmcblk0p2 size: 29.18 GiB fs: ext4 label: rootfs uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: Toshiba America Canvio Basics HDD type: Mass Storage driver: usb-storage interfaces: 1 
           rev: 3.0 speed: 5 Gb/s chip ID: 0480:a202 
           Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http://archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 0.3% command: init pid: 1 mem: 8.01 MiB (0.2%) 
           2: cpu: 0.2% command: haveged pid: 336 mem: 4.23 MiB (0.1%) 
           3: cpu: 0.2% command: mysqld pid: 917 mem: 115.8 MiB (3.0%) 
           4: cpu: 0.2% command: redis-server pid: 1445 mem: 4.66 MiB (0.1%) 
           5: cpu: 0.1% command: [rcu_sched] pid: 10 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 115.8 MiB (3.0%) command: mysqld pid: 917 cpu: 0.2% 
           2: mem: 27.9 MiB (0.7%) command: php-fpm: pid: 773 cpu: 0.0% 
           3: mem: 15.7 MiB (0.4%) command: unattended-upgrade-shutdown started by: python3 pid: 763 cpu: 0.0% 
           4: mem: 8.77 MiB (0.2%) command: udisksd pid: 376 cpu: 0.0% 
           5: mem: 8.01 MiB (0.2%) command: init pid: 1 cpu: 0.3% 
Info:      Processes: 137 Uptime: 19m Init: systemd v: 241 runlevel: 5 Compilers: gcc: N/A alt: 8 Shell: benchmark.sh 
           inxi: 3.0.37

Benchmark #5250 - Brand: Toshiba Canvio 2.5" MQ Series