Benchmark #52587 - pibenchmarks.com

Brand: SanDisk SD Extreme Pro A2 (SR64G)
A2 C10 V30 U3
#22 / 1,539
428
#1,108 / 1,539
#114 / 369
1,300
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-11-15 16:33:42
#52,587
1,094
-206 (-18.83%)
Anonymous
SanDisk SD card A2 Class 10 V30 U3 (SR64G)

Secure Digital (SD) Card Details
SanDisk SD Extreme Pro A2 (SR64G)
A2 C10 V30 U3
59.2G
SD
SanDisk
SR64G
SDXC
6.00
0x03
SD
8.0
03/2019
Class 10
A2
U3
V30

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
N/A
4
1,500
500
1,600
42 (-9)

Operating System

Debian GNU/Linux 10 (buster)
aarch64

Benchmark Results
27 MB/s
37.81 MB/s
24.58 MB/s
849 IOPS
2,263 IOPS
3,398 KB/s
9,052 KB/s
7,597 KB/s
1,756 KB/s
6,067 KB/s
3,064 KB/s

inxi Results
System: Kernel: 5.10.0-0.bpo.9-arm64 aarch64 bits: 64 compiler: gcc v: 8.3.0 parameters: dma.dmachans=0x37f5 bcm2709.boardrev=0xd03114 bcm2709.serial=0x3a182d3d bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty0 console=ttyS1,115200 root=/dev/mmcblk1p2 rw fsck.repair=yes net.ifnames=0 rootwait Console: N/A Distro: Debian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: N/A Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 7.7 GiB used: 3.08 GiB (39.9%) gpu: 76 MiB RAM Report: no-data: dmidecode is not allowed to read /dev/mem PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: No display server data found. Headless machine? tty: N/A Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Sound Server-1: ALSA v: k5.10.0-0.bpo.9-arm64 running: yes Sound Server-2: PulseAudio v: 12.2 running: no Network: Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v6: scope: link Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq IF-ID-1: br0 state: up speed: 1000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: docker0 state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-3: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A IP v4: scope: global broadcast: IP v6: virtual: stable-privacy scope: link IF-ID-4: veth1c67e04 state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: veth3a53b85 state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: wlan0 state: up mac: IP v6: scope: link WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: hardware: no software: no address: see --recommends Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial Report: This feature requires one of these tools: hciconfig/bt-adapter Logical: Message: No logical block device data found. RAID: Supported mdraid levels: linear multipath raid0 raid1 raid6 raid5 raid4 raid10 Device-1: md127 maj-min: 9:127 type: mdraid level: mirror status: active state: clean size: 1.82 TiB Info: report: 2/2 UU blocks: 1953382464 chunk-size: N/A super-blocks: 1.2 Components: Online: 0: sda maj-min: 8:0 size: 1.82 TiB state: active sync 1: sdb maj-min: 8:16 size: 1.82 TiB state: active sync Drives: Local Storage: total: raw: 3.7 TiB usable: 1.88 TiB used: 708.81 GiB (36.9%) ID-1: /dev/mmcblk1 maj-min: 179:0 model: SR64G size: 59.48 GiB block-size: physical: 512 B logical: 512 B type: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Western Digital model: WD20EZRZ-00Z5HB0 size: 1.82 TiB block-size: physical: 4096 B logical: 512 B type: HDD rpm: 5400 Message: Unknown USB bridge. Flash drive/Unsupported enclosure? ID-3: /dev/sdb maj-min: 8:16 type: USB vendor: Western Digital model: WD20EZRZ-00Z5HB0 size: 1.82 TiB block-size: physical: 4096 B logical: 512 B type: HDD rpm: 5400 Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No optical or floppy data found. Partition: ID-1: / raw-size: 59.19 GiB size: 58.28 GiB (98.47%) used: 14.93 GiB (25.6%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk1p2 maj-min: 179:2 label: RASPIROOT uuid: cce1d06d-e567-4b48-a624-e823b516507f ID-2: /NAS/Backup raw-size: 1.82 TiB size: 1.79 TiB (98.38%) used: 693.74 GiB (37.9%) fs: ext4 block-size: 4096 B dev: /dev/md127 maj-min: 9:127 label: BLUE uuid: d3be79d7-9f7e-4d33-b90e-c038cc0c48b8 ID-3: /boot/firmware raw-size: 299 MiB size: 298.8 MiB (99.94%) used: 134.4 MiB (45.0%) fs: vfat block-size: 512 B dev: /dev/mmcblk1p1 maj-min: 179:1 label: RASPIFIRM uuid: AC25-5007 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 3 GiB used: 10.5 MiB (0.3%) priority: -2 file: /swapfile Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 1-1.2:3 info: Genesys Logic 4-port hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 05e3:0610 class-ID: 0900 Hub-4: 1-1.2.1:4 info: Genesys Logic 4-port hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 05e3:0610 class-ID: 0900 Hub-5: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Hub-6: 2-2:2 info: Genesys Logic ports: 4 rev: 3.2 speed: 5 Gb/s chip-ID: 05e3:0620 class-ID: 0900 Hub-7: 2-2.1:3 info: Genesys Logic ports: 4 rev: 3.2 speed: 5 Gb/s chip-ID: 05e3:0620 class-ID: 0900 Device-1: 2-2.1.2:5 info: ASMedia type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip-ID: 174c:0835 class-ID: 0806 Device-2: 2-2.2:4 info: ASMedia type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip-ID: 174c:0835 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: note: see --pkg apt: 1410 lib: 798 Active apt repos in: /etc/apt/sources.list 1: deb http: //deb.debian.org/debian buster main contrib non-free 2: deb http: //deb.debian.org/debian-security buster/updates main contrib non-free 3: deb http: //deb.debian.org/debian/ buster-backports main contrib non-free # raspi 4 needs a kernel and raspi-firmware newer than buster's Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=arm64 signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https: //download.docker.com/linux/debian buster stable Active apt repos in: /etc/apt/sources.list.d/mopidy.list 1: deb https: //apt.mopidy.com/ buster main contrib non-free 2: deb-src https: //apt.mopidy.com/ buster main contrib non-free Active apt repos in: /etc/apt/sources.list.d/ookla_speedtest-cli.list 1: deb https: //packagecloud.io/ookla/speedtest-cli/debian/ buster main 2: deb-src https: //packagecloud.io/ookla/speedtest-cli/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/spocon.list 1: deb http: //ppa.launchpad.net/spocon/spocon/ubuntu bionic main Processes: CPU top: 5 of 221 1: cpu: 6.0% command: apps.plugin pid: 8297 mem: 6.31 MiB (0.0%) 2: cpu: 5.8% command: python.d.plugin started by: python3 pid: 8295 mem: 48.0 MiB (0.6%) 3: cpu: 4.6% command: netdata pid: 8008 mem: 353.5 MiB (4.5%) 4: cpu: 1.4% command: dockerd pid: 802 mem: 91.1 MiB (1.1%) 5: cpu: 1.0% command: rdiffweb started by: python3 pid: 531 mem: 59.7 MiB (0.7%) Memory top: 5 of 221 1: mem: 1228.9 MiB (15.7%) command: clamd pid: 536 cpu: 0.0% 2: mem: 353.5 MiB (4.5%) command: netdata pid: 8008 cpu: 4.6% 3: mem: 152.2 MiB (1.9%) command: amavisd-new pid: 1330 cpu: 0.0% 4: mem: 149.1 MiB (1.9%) command: amavisd-new pid: 1331 cpu: 0.0% 5: mem: 148.3 MiB (1.8%) command: amavisd-new pid: 1299 cpu: 0.0% Info: Processes: 221 Uptime: 4d 1h 14m Init: systemd v: 241 runlevel: 5 tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.08

inxi Results

System:    Kernel: 5.10.0-0.bpo.9-arm64 aarch64 bits: 64 compiler: gcc v: 8.3.0
           parameters:  dma.dmachans=0x37f5 bcm2709.boardrev=0xd03114 bcm2709.serial=0x3a182d3d
           bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000
           vc_mem.mem_size=0x40000000 console=tty0 console=ttyS1,115200 root=/dev/mmcblk1p2 rw
           fsck.repair=yes net.ifnames=0 rootwait
           Console: N/A Distro: Debian GNU/Linux 10 (buster)
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: N/A Battery:   Message: No system battery data found. Is one present?
Memory:    RAM: total: 7.7 GiB used: 3.08 GiB (39.9%) gpu: 76 MiB
           RAM Report: no-data: dmidecode is not allowed to read /dev/mem
PCI Slots: ARM: No ARM data found for this feature.
CPU:       Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8
           model-id: 0 stepping: 3 bogomips: 432
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600
           Features: asimd cpuid crc32 evtstrm fp
           Vulnerabilities: Type: itlb_multihit status: Not affected
           Type: l1tf status: Not affected
           Type: mds status: Not affected
           Type: meltdown status: Not affected
           Type: spec_store_bypass status: Vulnerable
           Type: spectre_v1 mitigation: __user pointer sanitization
           Type: spectre_v2 status: Vulnerable
           Type: srbds status: Not affected
           Type: tsx_async_abort status: Not affected
Graphics:  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700
           class-ID: hdmi
           Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700
           class-ID: hdmi
           Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu
           class-ID: gpu
           Display: server: No display server data found. Headless machine? tty: N/A
           Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:     Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700
           class-ID: hdmi
           Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700
           class-ID: hdmi
           Sound Server-1: ALSA v: k5.10.0-0.bpo.9-arm64 running: yes
           Sound Server-2: PulseAudio v: 12.2 running: no
Network:   Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A
           chip-ID: brcm:fd580000 class-ID: ethernet
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 
           IP v6:  scope: link
           Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A
           chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq
           IF-ID-1: br0 state: up speed: 1000 Mbps duplex: unknown mac: 
           IP v4:  scope: global broadcast: 
           IP v6:  scope: link
           IF-ID-2: docker0 state: up speed: 10000 Mbps duplex: unknown mac: 
           IP v4:  scope: global broadcast: 
           IP v4:  type: noprefixroute scope: global broadcast: 
           IP v6:  scope: link
           IF-ID-3: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A
           IP v4:  scope: global broadcast: 
           IP v6:  virtual: stable-privacy scope: link
           IF-ID-4: veth1c67e04 state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-5: veth3a53b85 state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-6: wlan0 state: up mac: 
           IP v6:  scope: link
           WAN IP: 
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
           Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block:
           hardware: no software: no address: see --recommends
           Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial
           Report: This feature requires one of these tools: hciconfig/bt-adapter
Logical:   Message: No logical block device data found.
RAID:      Supported mdraid levels: linear multipath raid0 raid1 raid6 raid5 raid4 raid10
           Device-1: md127 maj-min: 9:127 type: mdraid level: mirror status: active state: clean
           size: 1.82 TiB
           Info: report: 2/2 UU blocks: 1953382464 chunk-size: N/A super-blocks: 1.2
           Components: Online:
           0: sda maj-min: 8:0 size: 1.82 TiB state: active sync
           1: sdb maj-min: 8:16 size: 1.82 TiB state: active sync
Drives:    Local Storage: total: raw: 3.7 TiB usable: 1.88 TiB used: 708.81 GiB (36.9%)
           ID-1: /dev/mmcblk1 maj-min: 179:0 model: SR64G size: 59.48 GiB block-size:
           physical: 512 B logical: 512 B type: SSD scheme: MBR
           SMART Message: Unknown smartctl error. Unable to generate data.
           ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Western Digital model: WD20EZRZ-00Z5HB0
           size: 1.82 TiB block-size: physical: 4096 B logical: 512 B type: HDD rpm: 5400
           Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
           ID-3: /dev/sdb maj-min: 8:16 type: USB vendor: Western Digital model: WD20EZRZ-00Z5HB0
           size: 1.82 TiB block-size: physical: 4096 B logical: 512 B type: HDD rpm: 5400
           Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
           Message: No optical or floppy data found.
Partition: ID-1: / raw-size: 59.19 GiB size: 58.28 GiB (98.47%) used: 14.93 GiB (25.6%) fs: ext4
           block-size: 4096 B dev: /dev/mmcblk1p2 maj-min: 179:2 label: RASPIROOT
           uuid: cce1d06d-e567-4b48-a624-e823b516507f
           ID-2: /NAS/Backup raw-size: 1.82 TiB size: 1.79 TiB (98.38%) used: 693.74 GiB (37.9%)
           fs: ext4 block-size: 4096 B dev: /dev/md127 maj-min: 9:127 label: BLUE
           uuid: d3be79d7-9f7e-4d33-b90e-c038cc0c48b8
           ID-3: /boot/firmware raw-size: 299 MiB size: 298.8 MiB (99.94%) used: 134.4 MiB (45.0%)
           fs: vfat block-size: 512 B dev: /dev/mmcblk1p1 maj-min: 179:1 label: RASPIFIRM
           uuid: AC25-5007
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
           ID-1: swap-1 type: file size: 3 GiB used: 10.5 MiB (0.3%) priority: -2 file: /swapfile
Unmounted: Message: No unmounted partitions found.
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s
           chip-ID: 1d6b:0002 class-ID: 0900
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA
           chip-ID: 2109:3431 class-ID: 0900
           Hub-3: 1-1.2:3 info: Genesys Logic 4-port hub ports: 4 rev: 2.1 speed: 480 Mb/s
           power: 100mA chip-ID: 05e3:0610 class-ID: 0900
           Hub-4: 1-1.2.1:4 info: Genesys Logic 4-port hub ports: 4 rev: 2.1 speed: 480 Mb/s
           power: 100mA chip-ID: 05e3:0610 class-ID: 0900
           Hub-5: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s
           chip-ID: 1d6b:0003 class-ID: 0900
           Hub-6: 2-2:2 info: Genesys Logic ports: 4 rev: 3.2 speed: 5 Gb/s chip-ID: 05e3:0620
           class-ID: 0900
           Hub-7: 2-2.1:3 info: Genesys Logic ports: 4 rev: 3.2 speed: 5 Gb/s chip-ID: 05e3:0620
           class-ID: 0900
           Device-1: 2-2.1.2:5 info: ASMedia type: Mass Storage driver: uas interfaces: 1 rev: 3.0
           speed: 5 Gb/s chip-ID: 174c:0835 class-ID: 0806 Device-2: 2-2.2:4 info: ASMedia type: Mass Storage driver: uas interfaces: 1 rev: 3.0
           speed: 5 Gb/s chip-ID: 174c:0835 class-ID: 0806 Sensors:   Missing: Required tool sensors not installed. Check --recommends
Repos:     Packages: note: see --pkg apt: 1410 lib: 798
           Active apt repos in: /etc/apt/sources.list
           1: deb http: //deb.debian.org/debian buster main contrib non-free
           2: deb http: //deb.debian.org/debian-security buster/updates main contrib non-free
           3: deb http: //deb.debian.org/debian/ buster-backports main contrib non-free # raspi 4 needs a kernel and raspi-firmware newer than buster's
           Active apt repos in: /etc/apt/sources.list.d/docker.list
           1: deb [arch=arm64 signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https: //download.docker.com/linux/debian buster stable
           Active apt repos in: /etc/apt/sources.list.d/mopidy.list
           1: deb https: //apt.mopidy.com/ buster main contrib non-free
           2: deb-src https: //apt.mopidy.com/ buster main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/ookla_speedtest-cli.list
           1: deb https: //packagecloud.io/ookla/speedtest-cli/debian/ buster main
           2: deb-src https: //packagecloud.io/ookla/speedtest-cli/debian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/spocon.list
           1: deb http: //ppa.launchpad.net/spocon/spocon/ubuntu bionic main
Processes: CPU top: 5 of 221
           1: cpu: 6.0% command: apps.plugin pid: 8297 mem: 6.31 MiB (0.0%)
           2: cpu: 5.8% command: python.d.plugin started by: python3 pid: 8295
           mem: 48.0 MiB (0.6%)
           3: cpu: 4.6% command: netdata pid: 8008 mem: 353.5 MiB (4.5%)
           4: cpu: 1.4% command: dockerd pid: 802 mem: 91.1 MiB (1.1%)
           5: cpu: 1.0% command: rdiffweb started by: python3 pid: 531 mem: 59.7 MiB (0.7%)
           Memory top: 5 of 221
           1: mem: 1228.9 MiB (15.7%) command: clamd pid: 536 cpu: 0.0%
           2: mem: 353.5 MiB (4.5%) command: netdata pid: 8008 cpu: 4.6%
           3: mem: 152.2 MiB (1.9%) command: amavisd-new pid: 1330 cpu: 0.0%
           4: mem: 149.1 MiB (1.9%) command: amavisd-new pid: 1331 cpu: 0.0%
           5: mem: 148.3 MiB (1.8%) command: amavisd-new pid: 1299 cpu: 0.0%
Info:      Processes: 221 Uptime: 4d 1h 14m Init: systemd v: 241 runlevel: 5 tool: systemctl
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.08

Benchmark #52587 - Brand: SanDisk SD Extreme Pro A2 (SR64G)