Benchmark #52640 - pibenchmarks.com

Brand: SanDisk SD Ultra A1 (SC32G)
A1 C10 U1
#5 / 1,700
1,254
#1,379 / 1,700
#239 / 404
1,108
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-11-16 14:59:13
#52,640
927
-181 (-19.53%)
Anonymous

Secure Digital (SD) Card Details
SanDisk SD Ultra A1 (SC32G)
A1 C10 U1
29.5G
SD
SanDisk
SC32G
SDHC
5.00
0x03
SD
8.0
01/2021
Class 10
A1
U1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 2B 1.1
Raspberry Pi 2 Model B Rev 1.1
Raspberry Pi Foundation
ARMv7 v7l
4
900
250
450 (+50)
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
15.5 MB/s
21.36 MB/s
21.38 MB/s
690 IOPS
2,184 IOPS
2,761 KB/s
8,738 KB/s
6,805 KB/s
3,206 KB/s
6,785 KB/s
2,461 KB/s

inxi Results
System: Host: raspberrypi Kernel: 5.10.63-v7+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyAMA0,115200 console=tty1 root=PARTUUID=7810c5da-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: pty pts/0 DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 2 Model B Rev 1.1 details: BCM2835 rev: a21041 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 999.2 MiB used: 270.4 MiB (27.1%) gpu: 76 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a7 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 5 bogomips: 230 Speed: 900 MHz min/max: 600/900 MHz Core speeds (MHz): 1: 900 2: 900 3: 900 4: 900 Features: edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc class-ID: fb Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: X.org 1.20.4 driver: loaded: fbturbo tty: 237x63 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.63-v7+ running: yes Sound Server-2: PulseAudio v: 12.2 running: yes Network: Device-1: bcm2835-sdhci driver: N/A port: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: mmcnr IF: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: noprefixroute scope: global broadcast: 192.168.X.X IP v6: fe80::4f88:7864:fe1a:d2b1/64 scope: link Device-2: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus-ID: 1-1.1:3 chip-ID: 0424:ec00 class-ID: ff00 IF: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: noprefixroute scope: global broadcast: 192.168.X.X IP v6: fe80::4f88:7864:fe1a:d2b1/64 scope: link IF-ID-1: wg0 state: unknown speed: N/A duplex: N/A mac: N/A IP v4: 10.6.X.X/24 scope: global WAN IP: 89.132.X.X Bluetooth: Message: No bluetooth data found. Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 29.72 GiB used: 3.07 GiB (10.3%) ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: SanDisk model: SC32G size: 29.72 GiB block-size: physical: 512 B logical: 512 B type: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. Message: No optical or floppy data found. Partition: ID-1: / raw-size: 29.47 GiB size: 28.95 GiB (98.24%) used: 3.02 GiB (10.4%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs uuid: 87b585d1-84c3-486a-8f3d-77cf16f84f30 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.1 MiB (19.1%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: 7616-4FD8 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 0424:9514 class-ID: 0900 Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 0424:ec00 class-ID: ff00 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 1428 lib: 709 Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 146 1: cpu: 2.8% command: init pid: 1 mem: 7.88 MiB (0.8%) 2: cpu: 1.5% command: [kworker/3:0-events_power_efficient] pid: 1090 mem: 0.00 MiB (0.0%) 3: cpu: 1.5% command: [kworker/0:0-mm_percpu_wq] pid: 1655 mem: 0.00 MiB (0.0%) 4: cpu: 0.7% command: lxpanel pid: 575 mem: 27.9 MiB (3.0%) 5: cpu: 0.7% command: applet.py started by: python3 pid: 597 mem: 27.0 MiB (2.9%) Memory top: 5 of 146 1: mem: 33.9 MiB (3.6%) command: xorg pid: 452 cpu: 0.2% 2: mem: 27.9 MiB (3.0%) command: lxpanel pid: 575 cpu: 0.7% 3: mem: 27.0 MiB (2.9%) command: applet.py started by: python3 pid: 597 cpu: 0.7% 4: mem: 20.9 MiB (2.2%) command: pcmanfm pid: 576 cpu: 0.6% 5: mem: 15.5 MiB (1.6%) command: unattended-upgrade-shutdown started by: python3 pid: 398 cpu: 0.2% Info: Processes: 146 Uptime: 8m Init: systemd v: 241 runlevel: 5 target: graphical.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Shell: Bash (sudo) v: 5.0.3 running-in: pty pts/0 (SSH) inxi: 3.3.08

inxi Results

System:    Host: raspberrypi Kernel: 5.10.63-v7+ armv7l bits: 32 compiler: N/A
           parameters: coherent_pool=1M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=720
           bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000
           console=ttyAMA0,115200 console=tty1 root=PARTUUID=7810c5da-02 rootfstype=ext4 elevator=deadline fsck.repair=yes
           rootwait quiet splash plymouth.ignore-serial-consoles
           Console: pty pts/0 DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster)
Machine:   Type: ARM Device System: Raspberry Pi 2 Model B Rev 1.1 details: BCM2835 rev: a21041 Battery:   Message: No system battery data found. Is one present?
Memory:    RAM: total: 999.2 MiB used: 270.4 MiB (27.1%) gpu: 76 MiB
           RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots: ARM: No ARM data found for this feature.
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a7 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 5
           bogomips: 230
           Speed: 900 MHz min/max: 600/900 MHz Core speeds (MHz): 1: 900 2: 900 3: 900 4: 900
           Features: edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4
           Vulnerabilities: No CPU vulnerability/bugs data available.
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc class-ID: fb
           Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Display: server: X.org 1.20.4 driver: loaded: fbturbo tty: 237x63
           Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio
           Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Sound Server-1: ALSA v: k5.10.63-v7+ running: yes
           Sound Server-2: PulseAudio v: 12.2 running: yes
Network:   Device-1: bcm2835-sdhci driver: N/A port: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: mmcnr
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
           IP v4: 192.168.X.X/24 type: noprefixroute scope: global broadcast: 192.168.X.X
           IP v6: fe80::4f88:7864:fe1a:d2b1/64 scope: link
           Device-2: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus-ID: 1-1.1:3
           chip-ID: 0424:ec00 class-ID: ff00
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
           IP v4: 192.168.X.X/24 type: noprefixroute scope: global broadcast: 192.168.X.X
           IP v6: fe80::4f88:7864:fe1a:d2b1/64 scope: link
           IF-ID-1: wg0 state: unknown speed: N/A duplex: N/A mac: N/A
           IP v4: 10.6.X.X/24 scope: global
           WAN IP: 89.132.X.X
Bluetooth: Message: No bluetooth data found.
Logical:   Message: No logical block device data found.
RAID:      Message: No RAID data found.
Drives:    Local Storage: total: 29.72 GiB used: 3.07 GiB (10.3%)
           ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: SanDisk model: SC32G size: 29.72 GiB block-size: physical: 512 B
           logical: 512 B type: SSD scheme: MBR
           SMART Message: Unknown smartctl error. Unable to generate data.
           Message: No optical or floppy data found.
Partition: ID-1: / raw-size: 29.47 GiB size: 28.95 GiB (98.24%) used: 3.02 GiB (10.4%) fs: ext4 block-size: 4096 B
           dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs uuid: 87b585d1-84c3-486a-8f3d-77cf16f84f30
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.1 MiB (19.1%) fs: vfat block-size: 512 B
           dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: 7616-4FD8
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
           ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap
Unmounted: Message: No unmounted partitions found.
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
           Hub-2: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s power: 2mA
           chip-ID: 0424:9514 class-ID: 0900
           Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx
           interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 0424:ec00 class-ID: ff00
Sensors:   Missing: Required tool sensors not installed. Check --recommends
Repos:     Packages: apt: 1428 lib: 709
           Active apt repos in: /etc/apt/sources.list
           1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list
           1: deb http://archive.raspberrypi.org/debian/ buster main
           No active apt repos in: /etc/apt/sources.list.d/vscode.list
Processes: CPU top: 5 of 146
           1: cpu: 2.8% command: init pid: 1 mem: 7.88 MiB (0.8%)
           2: cpu: 1.5% command: [kworker/3:0-events_power_efficient] pid: 1090 mem: 0.00 MiB (0.0%)
           3: cpu: 1.5% command: [kworker/0:0-mm_percpu_wq] pid: 1655 mem: 0.00 MiB (0.0%)
           4: cpu: 0.7% command: lxpanel pid: 575 mem: 27.9 MiB (3.0%)
           5: cpu: 0.7% command: applet.py started by: python3 pid: 597 mem: 27.0 MiB (2.9%)
           Memory top: 5 of 146
           1: mem: 33.9 MiB (3.6%) command: xorg pid: 452 cpu: 0.2%
           2: mem: 27.9 MiB (3.0%) command: lxpanel pid: 575 cpu: 0.7%
           3: mem: 27.0 MiB (2.9%) command: applet.py started by: python3 pid: 597 cpu: 0.7%
           4: mem: 20.9 MiB (2.2%) command: pcmanfm pid: 576 cpu: 0.6%
           5: mem: 15.5 MiB (1.6%) command: unattended-upgrade-shutdown started by: python3 pid: 398 cpu: 0.2%
Info:      Processes: 146 Uptime: 8m Init: systemd v: 241 runlevel: 5 target: graphical.target tool: systemctl Compilers:
           gcc: 8.3.0 alt: 8 Shell: Bash (sudo) v: 5.0.3 running-in: pty pts/0 (SSH) inxi: 3.3.08

Benchmark #52640 - Brand: SanDisk SD Ultra A1 (SC32G)