Benchmark #52741 - pibenchmarks.com

Brand: SanDisk Extreme Pro SSD
SSD (2.5" SATA)
#185 / 1,672
78
#581 / 1,672
#562 / 983
#122 / 370
6,556
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-11-18 11:02:00
#52,741
8,728
+2,172 (+24.89%)
Caxton Pi
Bullseye 64bit 2100 750 GPU 500

Storage Details
SanDisk Extreme Pro SSD
SSD (2.5" SATA)
111.5G
SSD
SanDisk
SDSSDX120GG2
3.10
5,000
2109:0711
0x2109
0x0711 (SMCWUSBT-G (no firmware))
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
N/A
4
2,100 (+600)
750 (+250)
1,600

Operating System

Debian GNU/Linux 11 (bullseye)
aarch64

Benchmark Results
156 MB/s
326.14 MB/s
309.01 MB/s
15,340 IOPS
31,604 IOPS
61,363 KB/s
126,419 KB/s
31,671 KB/s
26,780 KB/s
21,862 KB/s
28,735 KB/s

inxi Results
System: Kernel: 5.10.63-v8+ aarch64 bits: 64 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=7daac53d-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 1 wm: Mutter 3.38.6 DM: LightDM 1.26.0 Distro: Raspberry Pi OS base: Debian GNU/Linux 11 (bullseye) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.78 GiB used: 1.01 GiB (26.7%) gpu: 500 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 bogomips: 432 Speed: 2100 MHz min/max: 1500/2100 MHz Core speeds (MHz): 1: 2100 2: 2100 3: 2100 4: 2100 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: X.org 1.20.11 compositor: mutter v: 3.38.6 driver: loaded: modesetting unloaded: fbdev resolution: Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Sound Server-1: ALSA v: k5.10.63-v8+ running: yes Sound Server-2: PulseAudio v: 14.2 running: yes Sound Server-3: PipeWire v: 0.3.19 running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: down mac: Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept service-classes: rendering, capturing, audio Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 111.79 GiB used: 3.22 GiB (2.9%) ID-1: /dev/sda maj-min: 8:0 type: USB vendor: SanDisk model: SDSSDX120GG2 size: 111.79 GiB block-size: physical: 512 B logical: 512 B type: SSD rev: R201 scheme: MBR SMART Message: A mandatory SMART command failed. Various possible causes. Message: No optical or floppy data found. Partition: ID-1: / raw-size: 111.54 GiB size: 109.75 GiB (98.40%) used: 3.19 GiB (2.9%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: a4b3ef34-532d-430b-a401-589e4a6a5d2c ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 29.7 MiB (11.8%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: E5B6-FD41 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 1-1.4:3 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 100mA chip-ID: 05e3:0610 class-ID: 0900 Device-1: 1-1.4.1:4 info: Holtek Wired Keyboard (78/79 key) [RPI Wired Keyboard 5] type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s power: 100mA chip-ID: 04d9:0006 class-ID: 0300 Device-2: 1-1.4.2:5 info: Pixart Imaging Optical Mouse type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s power: 100mA chip-ID: 093a:2510 class-ID: 0301 Hub-4: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-2:2 info: VIA Labs VL711 SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s power: 8mA chip-ID: 2109:0711 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 1357 lib: 734 Active apt repos in: /etc/apt/sources.list 1: deb http: //deb.debian.org/debian bullseye main contrib non-free 2: deb http: //security.debian.org/debian-security bullseye-security main contrib non-free 3: deb http: //deb.debian.org/debian bullseye-updates main contrib non-free Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ bullseye main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 182 1: cpu: 5.2% command: benchmark.txt started by: geany pid: 1975 mem: 48.2 MiB (1.4%) 2: cpu: 3.0% command: lxterminal pid: 1987 mem: 34.8 MiB (1.0%) 3: cpu: 0.6% command: bash pid: 2000 mem: 3.09 MiB (0.0%) 4: cpu: 0.5% command: [kworker/u8:3-events_unbound] pid: 1930 mem: 0.00 MiB (0.0%) 5: cpu: 0.5% command: gvfsd-smb pid: 1964 mem: 22.0 MiB (0.6%) Memory top: 5 of 182 1: mem: 116.0 MiB (3.4%) command: xorg pid: 637 cpu: 0.2% 2: mem: 100.0 MiB (2.9%) command: pcmanfm pid: 906 cpu: 0.1% 3: mem: 86.1 MiB (2.5%) command: mutter pid: 901 cpu: 0.2% 4: mem: 73.1 MiB (2.1%) command: lxpanel pid: 905 cpu: 0.1% 5: mem: 48.2 MiB (1.4%) command: benchmark.txt started by: geany pid: 1975 cpu: 5.2% Info: Processes: 182 Uptime: 32m Init: systemd v: 247 runlevel: 5 target: graphical.target tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.08

inxi Results

System:    Kernel: 5.10.63-v8+ aarch64 bits: 64 compiler: N/A
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0
           snd_bcm2835.enable_hdmi=1
           video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000
           vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=7daac53d-02
           rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
           Console: tty 1 wm: Mutter 3.38.6 DM: LightDM 1.26.0 Distro: Raspberry Pi OS
           base: Debian GNU/Linux 11 (bullseye)
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112
           Battery:   Message: No system battery data found. Is one present?
Memory:    RAM: total: 3.78 GiB used: 1.01 GiB (26.7%) gpu: 500 MiB
           RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots: ARM: No ARM data found for this feature.
CPU:       Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8
           model-id: 0 stepping: 3 bogomips: 432
           Speed: 2100 MHz min/max: 1500/2100 MHz Core speeds (MHz): 1: 2100 2: 2100 3: 2100
           4: 2100
           Features: asimd cpuid crc32 evtstrm fp
           Vulnerabilities: Type: itlb_multihit status: Not affected
           Type: l1tf status: Not affected
           Type: mds status: Not affected
           Type: meltdown status: Not affected
           Type: spec_store_bypass status: Vulnerable
           Type: spectre_v1 mitigation: __user pointer sanitization
           Type: spectre_v2 status: Vulnerable
           Type: srbds status: Not affected
           Type: tsx_async_abort status: Not affected
Graphics:  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700
           class-ID: hdmi
           Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700
           class-ID: hdmi
           Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu
           class-ID: gpu
           Display: server: X.org 1.20.11 compositor: mutter v: 3.38.6 driver: loaded: modesetting
           unloaded: fbdev resolution: 
           Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:     Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700
           class-ID: hdmi
           Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700
           class-ID: hdmi
           Device-3: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio
           class-ID: bcm2835_audio
           Sound Server-1: ALSA v: k5.10.63-v8+ running: yes
           Sound Server-2: PulseAudio v: 14.2 running: yes
           Sound Server-3: PipeWire v: 0.3.19 running: yes
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A
           chip-ID: brcm:fe300000 class-ID: mmcnr
           IF: wlan0 state: down mac: 
           Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A
           chip-ID: brcm:fd580000 class-ID: ethernet
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 
           IP v4:  type: dynamic noprefixroute scope: global broadcast: 
           IP v6:  scope: link
           WAN IP: 
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
           Report: hciconfig ID: hci0 rfk-id: 1 state: up address:  bt-v: 3.0 lmp-v: 5.0
           sub-v: 6119 hci-v: 5.0 rev: 156
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept
           service-classes: rendering, capturing, audio
Logical:   Message: No logical block device data found.
RAID:      Message: No RAID data found.
Drives:    Local Storage: total: 111.79 GiB used: 3.22 GiB (2.9%)
           ID-1: /dev/sda maj-min: 8:0 type: USB vendor: SanDisk model: SDSSDX120GG2
           size: 111.79 GiB block-size: physical: 512 B logical: 512 B type: SSD rev: R201 scheme: MBR
           SMART Message: A mandatory SMART command failed. Various possible causes.
           Message: No optical or floppy data found.
Partition: ID-1: / raw-size: 111.54 GiB size: 109.75 GiB (98.40%) used: 3.19 GiB (2.9%) fs: ext4
           block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs
           uuid: a4b3ef34-532d-430b-a401-589e4a6a5d2c
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 29.7 MiB (11.8%) fs: vfat
           block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: E5B6-FD41
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
           ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap
Unmounted: Message: No unmounted partitions found.
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s
           chip-ID: 1d6b:0002 class-ID: 0900
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA
           chip-ID: 2109:3431 class-ID: 0900
           Hub-3: 1-1.4:3 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 100mA
           chip-ID: 05e3:0610 class-ID: 0900
           Device-1: 1-1.4.1:4 info: Holtek Wired Keyboard (78/79 key) [RPI Wired Keyboard 5]
           type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s
           power: 100mA chip-ID: 04d9:0006 class-ID: 0300
           Device-2: 1-1.4.2:5 info: Pixart Imaging Optical Mouse type: Mouse
           driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s power: 100mA
           chip-ID: 093a:2510 class-ID: 0301
           Hub-4: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s
           chip-ID: 1d6b:0003 class-ID: 0900
           Device-1: 2-2:2 info: VIA Labs VL711 SATA 6Gb/s bridge type: Mass Storage driver: uas
           interfaces: 1 rev: 3.1 speed: 5 Gb/s power: 8mA chip-ID: 2109:0711 class-ID: 0806
           Sensors:   Missing: Required tool sensors not installed. Check --recommends
Repos:     Packages: apt: 1357 lib: 734
           Active apt repos in: /etc/apt/sources.list
           1: deb http: //deb.debian.org/debian bullseye main contrib non-free
           2: deb http: //security.debian.org/debian-security bullseye-security main contrib non-free
           3: deb http: //deb.debian.org/debian bullseye-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/raspi.list
           1: deb http: //archive.raspberrypi.org/debian/ bullseye main
           No active apt repos in: /etc/apt/sources.list.d/vscode.list
Processes: CPU top: 5 of 182
           1: cpu: 5.2% command: benchmark.txt started by: geany pid: 1975 mem: 48.2 MiB (1.4%)
           2: cpu: 3.0% command: lxterminal pid: 1987 mem: 34.8 MiB (1.0%)
           3: cpu: 0.6% command: bash pid: 2000 mem: 3.09 MiB (0.0%)
           4: cpu: 0.5% command: [kworker/u8:3-events_unbound] pid: 1930 mem: 0.00 MiB (0.0%)
           5: cpu: 0.5% command: gvfsd-smb pid: 1964 mem: 22.0 MiB (0.6%)
           Memory top: 5 of 182
           1: mem: 116.0 MiB (3.4%) command: xorg pid: 637 cpu: 0.2%
           2: mem: 100.0 MiB (2.9%) command: pcmanfm pid: 906 cpu: 0.1%
           3: mem: 86.1 MiB (2.5%) command: mutter pid: 901 cpu: 0.2%
           4: mem: 73.1 MiB (2.1%) command: lxpanel pid: 905 cpu: 0.1%
           5: mem: 48.2 MiB (1.4%) command: benchmark.txt started by: geany pid: 1975 cpu: 5.2%
Info:      Processes: 182 Uptime: 32m Init: systemd v: 247 runlevel: 5 target: graphical.target
           tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release
           inxi: 3.3.08

Benchmark #52741 - Brand: SanDisk Extreme Pro SSD