Benchmark #52838 - pibenchmarks.com

Brand: SanDisk SD Extreme A2 (SN64G)
A2 C10 V30 U3
#16 / 1,539
568
#1,087 / 1,539
#96 / 369
1,347
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-11-20 09:49:08
#52,838
1,007
-340 (-33.76%)
Anonymous
SanDisk Extreme on Pi 3B

Secure Digital (SD) Card Details
SanDisk SD Extreme A2 (SN64G)
A2 C10 V30 U3
59.2G
SD
SanDisk
SN64G
SDXC
6.00
0x03
SD
8.0
02/2020
Class 10
A2
U3
V30

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B+ 1.3
Raspberry Pi 3 Model B Plus Rev 1.3
Raspberry Pi Foundation
ARMv7 v7l
4
1,400
400
450 (-50)
50

Operating System

Raspbian GNU/Linux 11 (bullseye)
armv7l

Benchmark Results
19.4 MB/s
20.77 MB/s
21.29 MB/s
881 IOPS
1,903 IOPS
3,524 KB/s
7,615 KB/s
6,987 KB/s
2,093 KB/s
5,841 KB/s
3,247 KB/s

inxi Results
System: Kernel: 5.10.63-v7+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=Composite-1:720x480@60i vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=f4cb6ff4-02 rootfstype=ext4 fsck.repair=yes rootwait Console: N/A Distro: Raspbian GNU/Linux 11 (bullseye) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 rev: a020d3 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 998.8 MiB used: 495.3 MiB (49.6%) gpu: 76 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 4 bogomips: 358 Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 4: 1400 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-hdmi driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:3f902000 class-ID: hdmi Device-2: bcm2835-vc4 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: gpu Display: server: No display server data found. Headless machine? tty: N/A Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:3f902000 class-ID: hdmi Device-2: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Sound Server-1: ALSA v: k5.10.63-v7+ running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:3f300000 class-ID: mmcnr IF: wlan0 state: up mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link Device-2: Microchip (formerly SMSC) type: USB driver: lan78xx bus-ID: 1-1.1.1:4 chip-ID: 0424:7800 class-ID: ff00 IF: eth0 state: down mac: IF-ID-1: br-49c1ca2fb872 state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: br-6ce1f3513a5f state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-3: docker0 state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-4: hassio state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-5: veth0194077 state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: veth1aeb1eb state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: veth7767174 state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: veth7d2ae62 state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: veth8588e82 state: up speed: 10000 Mbps duplex: full mac: IF-ID-10: vethab6afca state: up speed: 10000 Mbps duplex: full mac: IF-ID-11: vethb5cfb40 state: up speed: 10000 Mbps duplex: full mac: IF-ID-12: vethbaa91f9 state: up speed: 10000 Mbps duplex: full mac: IF-ID-13: vethd93400b state: up speed: 10000 Mbps duplex: full mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:3f201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept service-classes: rendering, capturing, audio Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 59.48 GiB used: 4.29 GiB (7.2%) ID-1: /dev/mmcblk0 maj-min: 179:0 model: SN64G size: 59.48 GiB block-size: physical: 512 B logical: 512 B type: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. Message: No optical or floppy data found. Partition: ID-1: / raw-size: 59.22 GiB size: 58.3 GiB (98.43%) used: 4.24 GiB (7.3%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs uuid: 568caafd-bab1-46cb-921b-cd257b61f505 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.1 MiB (19.1%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: C839-E506 Swap: Alert: No swap data was found. Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: Microchip (formerly SMSC) USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 0424:2514 class-ID: 0900 Hub-3: 1-1.1:3 info: Microchip (formerly SMSC) USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 0424:2514 class-ID: 0900 Device-1: 1-1.1.1:4 info: Microchip (formerly SMSC) type: Network driver: lan78xx interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 2mA chip-ID: 0424:7800 class-ID: ff00 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 633 lib: 330 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https: //download.docker.com/linux/raspbian bullseye stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ bullseye main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 218 1: cpu: 20.1% command: python3 pid: 4683 mem: 135.5 MiB (14.6%) 2: cpu: 6.7% command: python3 pid: 2279 mem: 38.9 MiB (4.2%) 3: cpu: 2.9% command: init pid: 1 mem: 8.63 MiB (0.9%) 4: cpu: 2.8% command: dockerd pid: 644 mem: 59.3 MiB (6.4%) 5: cpu: 2.4% command: esphome started by: python3 pid: 5596 mem: 19.1 MiB (2.0%) Memory top: 5 of 218 1: mem: 135.5 MiB (14.6%) command: python3 pid: 4683 cpu: 20.1% 2: mem: 59.3 MiB (6.4%) command: dockerd pid: 644 cpu: 2.8% 3: mem: 38.9 MiB (4.2%) command: python3 pid: 2279 cpu: 6.7% 4: mem: 33.8 MiB (3.6%) command: docker pid: 1811 cpu: 0.1% 5: mem: 28.5 MiB (3.0%) command: /portainer pid: 1231 cpu: 0.2% Info: Processes: 218 Uptime: 4m Init: systemd v: 247 runlevel: 5 tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.08

inxi Results

System:    Kernel: 5.10.63-v7+ armv7l bits: 32 compiler: N/A
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0
           snd_bcm2835.enable_hdmi=1 video=Composite-1:720x480@60i vc_mem.mem_base=0x3ec00000
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=f4cb6ff4-02
           rootfstype=ext4 fsck.repair=yes rootwait
           Console: N/A Distro: Raspbian GNU/Linux 11 (bullseye)
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835
           rev: a020d3 Battery:   Message: No system battery data found. Is one present?
Memory:    RAM: total: 998.8 MiB used: 495.3 MiB (49.6%) gpu: 76 MiB
           RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots: ARM: No ARM data found for this feature.
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l
           family: 7 model-id: 0 stepping: 4 bogomips: 358
           Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400
           4: 1400
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32
           vfpv3 vfpv4
           Vulnerabilities: No CPU vulnerability/bugs data available.
Graphics:  Device-1: bcm2835-hdmi driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:3f902000
           class-ID: hdmi
           Device-2: bcm2835-vc4 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:soc
           class-ID: gpu
           Display: server: No display server data found. Headless machine? tty: N/A
           Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:     Device-1: bcm2835-hdmi driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:3f902000
           class-ID: hdmi
           Device-2: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio
           class-ID: bcm2835_audio
           Sound Server-1: ALSA v: k5.10.63-v7+ running: yes
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A
           chip-ID: brcm:3f300000 class-ID: mmcnr
           IF: wlan0 state: up mac: 
           IP v4:  type: noprefixroute scope: global broadcast: 
           IP v6:  scope: link
           Device-2: Microchip (formerly SMSC) type: USB driver: lan78xx bus-ID: 1-1.1.1:4
           chip-ID: 0424:7800 class-ID: ff00
           IF: eth0 state: down mac: 
           IF-ID-1: br-49c1ca2fb872 state: up speed: 10000 Mbps duplex: unknown mac: 
           IP v4:  scope: global broadcast: 
           IP v6:  scope: link
           IF-ID-2: br-6ce1f3513a5f state: up speed: 10000 Mbps duplex: unknown mac: 
           IP v4:  scope: global broadcast: 
           IP v6:  scope: link
           IF-ID-3: docker0 state: up speed: 10000 Mbps duplex: unknown mac: 
           IP v4:  scope: global broadcast: 
           IP v6:  scope: link
           IF-ID-4: hassio state: up speed: 10000 Mbps duplex: unknown mac: 
           IP v4:  scope: global broadcast: 
           IP v6:  scope: link
           IF-ID-5: veth0194077 state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-6: veth1aeb1eb state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-7: veth7767174 state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-8: veth7d2ae62 state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-9: veth8588e82 state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-10: vethab6afca state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-11: vethb5cfb40 state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-12: vethbaa91f9 state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-13: vethd93400b state: up speed: 10000 Mbps duplex: full mac: 
           WAN IP: 
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:3f201000 class-ID: serial
           Report: hciconfig ID: hci0 rfk-id: 1 state: up address:  bt-v: 3.0 lmp-v: 5.0
           sub-v: 6119 hci-v: 5.0 rev: 156
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept
           service-classes: rendering, capturing, audio
Logical:   Message: No logical block device data found.
RAID:      Message: No RAID data found.
Drives:    Local Storage: total: 59.48 GiB used: 4.29 GiB (7.2%)
           ID-1: /dev/mmcblk0 maj-min: 179:0 model: SN64G size: 59.48 GiB block-size:
           physical: 512 B logical: 512 B type: SSD scheme: MBR
           SMART Message: Unknown smartctl error. Unable to generate data.
           Message: No optical or floppy data found.
Partition: ID-1: / raw-size: 59.22 GiB size: 58.3 GiB (98.43%) used: 4.24 GiB (7.3%) fs: ext4
           block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs
           uuid: 568caafd-bab1-46cb-921b-cd257b61f505
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.1 MiB (19.1%) fs: vfat
           block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: C839-E506
Swap:      Alert: No swap data was found.
Unmounted: Message: No unmounted partitions found.
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s
           chip-ID: 1d6b:0002 class-ID: 0900
           Hub-2: 1-1:2 info: Microchip (formerly SMSC) USB 2.0 Hub ports: 4 rev: 2.0
           speed: 480 Mb/s power: 2mA chip-ID: 0424:2514 class-ID: 0900
           Hub-3: 1-1.1:3 info: Microchip (formerly SMSC) USB 2.0 Hub ports: 3 rev: 2.0
           speed: 480 Mb/s power: 2mA chip-ID: 0424:2514 class-ID: 0900
           Device-1: 1-1.1.1:4 info: Microchip (formerly SMSC) type: Network driver: lan78xx
           interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 2mA chip-ID: 0424:7800 class-ID: ff00
Sensors:   Missing: Required tool sensors not installed. Check --recommends
Repos:     Packages: apt: 633 lib: 330
           Active apt repos in: /etc/apt/sources.list
           1: deb http: //raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list
           1: deb [arch=armhf signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https: //download.docker.com/linux/raspbian bullseye stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list
           1: deb http: //archive.raspberrypi.org/debian/ bullseye main
           No active apt repos in: /etc/apt/sources.list.d/vscode.list
Processes: CPU top: 5 of 218
           1: cpu: 20.1% command: python3 pid: 4683 mem: 135.5 MiB (14.6%)
           2: cpu: 6.7% command: python3 pid: 2279 mem: 38.9 MiB (4.2%)
           3: cpu: 2.9% command: init pid: 1 mem: 8.63 MiB (0.9%)
           4: cpu: 2.8% command: dockerd pid: 644 mem: 59.3 MiB (6.4%)
           5: cpu: 2.4% command: esphome started by: python3 pid: 5596 mem: 19.1 MiB (2.0%)
           Memory top: 5 of 218
           1: mem: 135.5 MiB (14.6%) command: python3 pid: 4683 cpu: 20.1%
           2: mem: 59.3 MiB (6.4%) command: dockerd pid: 644 cpu: 2.8%
           3: mem: 38.9 MiB (4.2%) command: python3 pid: 2279 cpu: 6.7%
           4: mem: 33.8 MiB (3.6%) command: docker pid: 1811 cpu: 0.1%
           5: mem: 28.5 MiB (3.0%) command: /portainer pid: 1231 cpu: 0.2%
Info:      Processes: 218 Uptime: 4m Init: systemd v: 247 runlevel: 5 tool: systemctl Compilers:
           gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.08

Benchmark #52838 - Brand: SanDisk SD Extreme A2 (SN64G)