Benchmark #52914 - pibenchmarks.com

Brand: Crucial MX500 Series
SSD (2.5" SATA)
#19 / 1,539
490
#387 / 1,539
#371 / 875
#73 / 363
6,859
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-11-22 04:13:19
#52,914
9,585
+2,726 (+28.44%)
Mothamoz
Corsair MX500 SSD on Pi 4 using UGREEN SATA to USB adapter

Storage Details
Crucial MX500 Series
SSD (2.5" SATA)
250G
SSD
Crucial
CT250MX500SSD1
2.5 inch
SATA
3.00
5,000
174c:1153
0x174c (ASMedia Technology Inc.)
0x1153 (ASM1153 SATA 3Gb/s bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
N/A
4
1,800 (+300)
500
1,600

Operating System

Debian GNU/Linux 11 (bullseye)
aarch64

Benchmark Results
164 MB/s
317.69 MB/s
245.35 MB/s
23,841 IOPS
35,493 IOPS
95,366 KB/s
141,975 KB/s
19,881 KB/s
25,298 KB/s
20,543 KB/s
28,284 KB/s

inxi Results
System: Kernel: 5.10.0-9-arm64 aarch64 bits: 64 compiler: gcc v: 10.2.1 parameters: dma.dmachans=0x37f5 bcm2709.boardrev=0xc03114 bcm2709.serial=0xa9bf7ef2 bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=tty0 console=ttyS1,115200 root=/dev/sda2 rw fsck.repair=yes net.ifnames=0 rootwait Console: N/A Distro: Debian GNU/Linux 11 (bullseye) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: N/A Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.7 GiB used: 1.63 GiB (44.1%) RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 bogomips: 432 Speed: 600 MHz min/max: 600/1800 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: No display server data found. Headless machine? tty: N/A Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Sound Server-1: ALSA v: k5.10.0-9-arm64 running: yes Network: Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: type: noprefixroute scope: link Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq IF-ID-1: br-2428177906a9 state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: docker0 state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-3: hassio state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-4: veth22e2f20 state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: veth5083019 state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: veth518d1c7 state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: veth5e22092 state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: veth60d08a6 state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: veth6f73d9b state: up speed: 10000 Mbps duplex: full mac: IF-ID-10: veth926974c state: up speed: 10000 Mbps duplex: full mac: IF-ID-11: vethb172e1e state: up speed: 10000 Mbps duplex: full mac: IF-ID-12: vethca3630f state: up speed: 10000 Mbps duplex: full mac: IF-ID-13: vethe9834b9 state: up speed: 10000 Mbps duplex: full mac: IF-ID-14: vethf7c4d1f state: up speed: 10000 Mbps duplex: full mac: IF-ID-15: vethfcdd077 state: up speed: 10000 Mbps duplex: full mac: IF-ID-16: wg0 state: unknown speed: N/A duplex: N/A mac: N/A IP v4: scope: global WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: rfkill ID: hci0 rfk-id: 0 state: down bt-service: not found rfk-block: hardware: no software: no address: see --recommends Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial Report: This feature requires one of these tools: hciconfig/bt-adapter Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 232.89 GiB used: 7.38 GiB (3.2%) ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Crucial model: CT250MX500SSD1 family: Micron Client SSDs size: 232.89 GiB block-size: physical: 4096 B logical: 512 B sata: 3.3 speed: 6.0 Gb/s type: SSD rev: M3CR043 temp: 28 C scheme: MBR SMART: yes state: enabled health: PASSED on: 37 hrs cycles: 10 written: 32.9 GiB Message: No optical or floppy data found. Partition: ID-1: / raw-size: 232.59 GiB size: 229.14 GiB (98.51%) used: 7.26 GiB (3.2%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT uuid: 899ea962-703a-49b8-926a-33b14329c638 ID-2: /boot/firmware raw-size: 296 MiB size: 295.8 MiB (99.93%) used: 125.8 MiB (42.5%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: RASPIFIRM uuid: 7F54-1442 Swap: Alert: No swap data was found. Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 1-1.4:3 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 100mA chip-ID: 1a40:0101 class-ID: 0900 Device-1: 1-1.4.4:4 info: Dresden Elektronik ZigBee gateway [ConBee II] type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 1cf1:0030 class-ID: 0a00 Hub-4: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-2:2 info: ASMedia ASM1153 SATA 3Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip-ID: 174c:1153 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 526 lib: 286 Active apt repos in: /etc/apt/sources.list 1: deb http: //deb.debian.org/debian bullseye main contrib non-free 2: deb http: //security.debian.org/debian-security bullseye-security main contrib non-free Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=arm64 signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https: //download.docker.com/linux/debian bullseye stable Processes: CPU top: 5 of 243 1: cpu: 4.0% command: [kworker/u8:6-events_unbound] pid: 148942 mem: 0.00 MiB (0.0%) 2: cpu: 3.0% command: python3 pid: 103855 mem: 361.8 MiB (9.5%) 3: cpu: 0.7% command: python3 pid: 1935 mem: 126.8 MiB (3.3%) 4: cpu: 0.6% command: systemd pid: 147797 mem: 8.31 MiB (0.2%) 5: cpu: 0.5% command: pihole-ftl pid: 697 mem: 11.1 MiB (0.2%) Memory top: 5 of 243 1: mem: 361.8 MiB (9.5%) command: python3 pid: 103855 cpu: 3.0% 2: mem: 126.8 MiB (3.3%) command: python3 pid: 1935 cpu: 0.7% 3: mem: 122.1 MiB (3.2%) command: node-red pid: 6044 cpu: 0.2% 4: mem: 92.8 MiB (2.4%) command: dockerd pid: 672 cpu: 0.4% 5: mem: 67.5 MiB (1.7%) command: traefik pid: 1160 cpu: 0.0% Info: Processes: 243 Uptime: 17h 34m Init: systemd v: 247 runlevel: 5 tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.08

inxi Results

System:    Kernel: 5.10.0-9-arm64 aarch64 bits: 64 compiler: gcc v: 10.2.1
           parameters:  dma.dmachans=0x37f5 bcm2709.boardrev=0xc03114 bcm2709.serial=0xa9bf7ef2
           bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000
           vc_mem.mem_size=0x3ff00000 console=tty0 console=ttyS1,115200 root=/dev/sda2 rw
           fsck.repair=yes net.ifnames=0 rootwait
           Console: N/A Distro: Debian GNU/Linux 11 (bullseye)
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: N/A Battery:   Message: No system battery data found. Is one present?
Memory:    RAM: total: 3.7 GiB used: 1.63 GiB (44.1%)
           RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots: ARM: No ARM data found for this feature.
CPU:       Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8
           model-id: 0 stepping: 3 bogomips: 432
           Speed: 600 MHz min/max: 600/1800 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600
           Features: asimd cpuid crc32 evtstrm fp
           Vulnerabilities: Type: itlb_multihit status: Not affected
           Type: l1tf status: Not affected
           Type: mds status: Not affected
           Type: meltdown status: Not affected
           Type: spec_store_bypass status: Vulnerable
           Type: spectre_v1 mitigation: __user pointer sanitization
           Type: spectre_v2 status: Vulnerable
           Type: srbds status: Not affected
           Type: tsx_async_abort status: Not affected
Graphics:  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700
           class-ID: hdmi
           Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700
           class-ID: hdmi
           Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu
           class-ID: gpu
           Display: server: No display server data found. Headless machine? tty: N/A
           Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:     Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700
           class-ID: hdmi
           Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700
           class-ID: hdmi
           Sound Server-1: ALSA v: k5.10.0-9-arm64 running: yes
Network:   Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A
           chip-ID: brcm:fd580000 class-ID: ethernet
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 
           IP v4:  type: noprefixroute scope: global broadcast: 
           IP v6:  type: noprefixroute scope: link
           Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A
           chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq
           IF-ID-1: br-2428177906a9 state: up speed: 10000 Mbps duplex: unknown mac: 
           IP v4:  scope: global broadcast: 
           IP v6:  scope: link
           IF-ID-2: docker0 state: up speed: 10000 Mbps duplex: unknown mac: 
           IP v4:  scope: global broadcast: 
           IP v6:  scope: link
           IF-ID-3: hassio state: up speed: 10000 Mbps duplex: unknown mac: 
           IP v4:  scope: global broadcast: 
           IP v6:  scope: link
           IF-ID-4: veth22e2f20 state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-5: veth5083019 state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-6: veth518d1c7 state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-7: veth5e22092 state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-8: veth60d08a6 state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-9: veth6f73d9b state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-10: veth926974c state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-11: vethb172e1e state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-12: vethca3630f state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-13: vethe9834b9 state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-14: vethf7c4d1f state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-15: vethfcdd077 state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-16: wg0 state: unknown speed: N/A duplex: N/A mac: N/A
           IP v4:  scope: global
           WAN IP: 
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
           Report: rfkill ID: hci0 rfk-id: 0 state: down bt-service: not found rfk-block:
           hardware: no software: no address: see --recommends
           Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial
           Report: This feature requires one of these tools: hciconfig/bt-adapter
Logical:   Message: No logical block device data found.
RAID:      Message: No RAID data found.
Drives:    Local Storage: total: 232.89 GiB used: 7.38 GiB (3.2%)
           ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Crucial model: CT250MX500SSD1
           family: Micron Client SSDs size: 232.89 GiB block-size: physical: 4096 B logical: 512 B
           sata: 3.3 speed: 6.0 Gb/s type: SSD rev: M3CR043 temp: 28 C
           scheme: MBR
           SMART: yes state: enabled health: PASSED on: 37 hrs cycles: 10 written: 32.9 GiB
           Message: No optical or floppy data found.
Partition: ID-1: / raw-size: 232.59 GiB size: 229.14 GiB (98.51%) used: 7.26 GiB (3.2%) fs: ext4
           block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT
           uuid: 899ea962-703a-49b8-926a-33b14329c638
           ID-2: /boot/firmware raw-size: 296 MiB size: 295.8 MiB (99.93%) used: 125.8 MiB (42.5%)
           fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: RASPIFIRM uuid: 7F54-1442
Swap:      Alert: No swap data was found.
Unmounted: Message: No unmounted partitions found.
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s
           chip-ID: 1d6b:0002 class-ID: 0900
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA
           chip-ID: 2109:3431 class-ID: 0900
           Hub-3: 1-1.4:3 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 100mA
           chip-ID: 1a40:0101 class-ID: 0900
           Device-1: 1-1.4.4:4 info: Dresden Elektronik ZigBee gateway [ConBee II]
           type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s
           power: 100mA chip-ID: 1cf1:0030 class-ID: 0a00 Hub-4: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s
           chip-ID: 1d6b:0003 class-ID: 0900
           Device-1: 2-2:2 info: ASMedia ASM1153 SATA 3Gb/s bridge type: Mass Storage driver: uas
           interfaces: 1 rev: 3.0 speed: 5 Gb/s chip-ID: 174c:1153 class-ID: 0806 Sensors:   Missing: Required tool sensors not installed. Check --recommends
Repos:     Packages: apt: 526 lib: 286
           Active apt repos in: /etc/apt/sources.list
           1: deb http: //deb.debian.org/debian bullseye main contrib non-free
           2: deb http: //security.debian.org/debian-security bullseye-security main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/docker.list
           1: deb [arch=arm64 signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https: //download.docker.com/linux/debian bullseye stable
Processes: CPU top: 5 of 243
           1: cpu: 4.0% command: [kworker/u8:6-events_unbound] pid: 148942 mem: 0.00 MiB (0.0%)
           2: cpu: 3.0% command: python3 pid: 103855 mem: 361.8 MiB (9.5%)
           3: cpu: 0.7% command: python3 pid: 1935 mem: 126.8 MiB (3.3%)
           4: cpu: 0.6% command: systemd pid: 147797 mem: 8.31 MiB (0.2%)
           5: cpu: 0.5% command: pihole-ftl pid: 697 mem: 11.1 MiB (0.2%)
           Memory top: 5 of 243
           1: mem: 361.8 MiB (9.5%) command: python3 pid: 103855 cpu: 3.0%
           2: mem: 126.8 MiB (3.3%) command: python3 pid: 1935 cpu: 0.7%
           3: mem: 122.1 MiB (3.2%) command: node-red pid: 6044 cpu: 0.2%
           4: mem: 92.8 MiB (2.4%) command: dockerd pid: 672 cpu: 0.4%
           5: mem: 67.5 MiB (1.7%) command: traefik pid: 1160 cpu: 0.0%
Info:      Processes: 243 Uptime: 17h 34m Init: systemd v: 247 runlevel: 5 tool: systemctl
           Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.08

Benchmark #52914 - Brand: Crucial MX500 Series