Benchmark #52985 - pibenchmarks.com

Brand: Toshiba XG4 Series
SSD (M.2 NVMe)
#771 / 1,679
7
#197 / 1,679
#195 / 984
#183 / 281
27,232
	Amazon.com Amazon.ca Amazon.sg

Overview
2021-11-23 09:21:22
#52,985
8,836
-18,396 (-208.19%)
Anonymous
Toshiba THNSN5256GPUK (OEM) on Pi 4 using Orico M.2 NVME to USB enclosure (RTL9210B-CG) with multiple docker containers running in the background

Storage Details
Toshiba XG4 Series
SSD (M.2 NVMe)
238.2G
SSD
Toshiba
THNSN5256GPUK
3.20
5,000
0bda:9210
0x0bda (Realtek Semiconductor Corp.)
0x9210 (RTL9210 M.2 NVME Adapter)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
N/A
4
1,500
500
1,600

Operating System

Debian GNU/Linux 11 (bullseye)
aarch64

Benchmark Results
130 MB/s
319.29 MB/s
312.89 MB/s
22,358 IOPS
20,418 IOPS
89,432 KB/s
81,674 KB/s
20,917 KB/s
27,981 KB/s
17,728 KB/s
32,548 KB/s

inxi Results
System: Kernel: 5.10.0-9-arm64 aarch64 bits: 64 compiler: gcc v: 10.2.1 parameters: dma.dmachans=0x37f5 bcm2709.boardrev=0xb03111 bcm2709.serial=0x9a7991a2 bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=tty0 console=ttyS1,115200 root=/dev/sda2 rw fsck.repair=yes net.ifnames=0 rootwait Console: N/A Distro: Debian GNU/Linux 11 (bullseye) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: N/A Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 1.8 GiB used: 872.9 MiB (47.3%) RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1000 2: 1000 3: 1000 4: 1000 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: No display server data found. Headless machine? tty: N/A Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Sound Server-1: ALSA v: k5.10.0-9-arm64 running: yes Network: Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic scope: global broadcast: IP v6: type: dynamic mngtmpaddr scope: global IP v6: type: dynamic mngtmpaddr scope: global IP v6: scope: link Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq IF-ID-1: br-3aa48f94cd8d state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: br-87d90ea0a7cc state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-3: docker0 state: down mac: IP v4: scope: global broadcast: IF-ID-4: veth11d5347 state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: veth21869da state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: veth2bbb09a state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: veth34fa147 state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: veth4c1bac7 state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: veth8e8fe7d state: up speed: 10000 Mbps duplex: full mac: IF-ID-10: vethbbd5872 state: up speed: 10000 Mbps duplex: full mac: IF-ID-11: vethce364d9 state: up speed: 10000 Mbps duplex: full mac: IF-ID-12: wlan0 state: down mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: hardware: no software: no address: see --recommends Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial Report: This feature requires one of these tools: hciconfig/bt-adapter Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 238.47 GiB used: 53.66 GiB (22.5%) ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Realtek model: RTL9210B-CG size: 238.47 GiB block-size: physical: 512 B logical: 512 B type: N/A rev: 1.00 drive rev: 41025KLA temp: 45 Celsius C scheme: MBR SMART: yes health: PASSED on: 131d 14h cycles: 3,351 read-units: 16,432,334 [8.41 TB] written-units: 13,826,491 [7.07 TB] Message: No optical or floppy data found. Partition: ID-1: / raw-size: 238.18 GiB size: 234.64 GiB (98.51%) used: 53.54 GiB (22.8%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT uuid: cbefaae9-9e43-46be-a039-4250306150f1 ID-2: /boot/firmware raw-size: 296 MiB size: 295.8 MiB (99.94%) used: 125.5 MiB (42.4%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: RASPIFIRM uuid: 0D36-6DFC Swap: Alert: No swap data was found. Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Device-1: 1-1.3:3 info: Dell Model L100 Keyboard type: Keyboard driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s power: 70mA chip-ID: 413c:2105 class-ID: 0301 Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-2:2 info: Realtek RTL9210 M.2 NVME Adapter type: Mass Storage driver: uas interfaces: 1 rev: 3.2 speed: 5 Gb/s power: 896mA chip-ID: 0bda:9210 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 517 lib: 281 Active apt repos in: /etc/apt/sources.list 1: deb http: //deb.debian.org/debian bullseye main contrib non-free 2: deb http: //security.debian.org/debian-security bullseye-security main contrib non-free Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=arm64 signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https: //download.docker.com/linux/debian bullseye stable Active apt repos in: /etc/apt/sources.list.d/syncthing.list 1: deb [signed-by=/usr/share/keyrings/syncthing-archive-keyring.gpg] https: //apt.syncthing.net/ syncthing stable Processes: CPU top: 5 of 200 1: cpu: 5.4% command: node pid: 2057 mem: 129.1 MiB (6.9%) 2: cpu: 4.4% command: gunicorn started by: python pid: 2140 mem: 92.7 MiB (5.0%) 3: cpu: 3.9% command: init pid: 1 mem: 10.1 MiB (0.5%) 4: cpu: 2.9% command: moonraker.py started by: python pid: 506 mem: 33.3 MiB (1.8%) 5: cpu: 2.3% command: traefik pid: 877 mem: 63.5 MiB (3.4%) Memory top: 5 of 200 1: mem: 129.1 MiB (6.9%) command: node pid: 2057 cpu: 5.4% 2: mem: 92.7 MiB (5.0%) command: gunicorn started by: python pid: 2140 cpu: 4.4% 3: mem: 90.3 MiB (4.8%) command: gunicorn started by: python pid: 2178 cpu: 0.8% 4: mem: 90.2 MiB (4.8%) command: gunicorn started by: python pid: 2180 cpu: 0.8% 5: mem: 90.2 MiB (4.8%) command: gunicorn started by: python pid: 2181 cpu: 0.8% Info: Processes: 200 Uptime: 4m Init: systemd v: 247 runlevel: 5 tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.09

inxi Results

System:    Kernel: 5.10.0-9-arm64 aarch64 bits: 64 compiler: gcc v: 10.2.1
           parameters:  dma.dmachans=0x37f5 bcm2709.boardrev=0xb03111 bcm2709.serial=0x9a7991a2
           bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000
           vc_mem.mem_size=0x3ff00000 console=tty0 console=ttyS1,115200 root=/dev/sda2 rw
           fsck.repair=yes net.ifnames=0 rootwait
           Console: N/A Distro: Debian GNU/Linux 11 (bullseye)
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: N/A Battery:   Message: No system battery data found. Is one present?
Memory:    RAM: total: 1.8 GiB used: 872.9 MiB (47.3%)
           RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots: ARM: No ARM data found for this feature.
CPU:       Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8
           model-id: 0 stepping: 3 bogomips: 432
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1000 2: 1000 3: 1000 4: 1000
           Features: asimd cpuid crc32 evtstrm fp
           Vulnerabilities: Type: itlb_multihit status: Not affected
           Type: l1tf status: Not affected
           Type: mds status: Not affected
           Type: meltdown status: Not affected
           Type: spec_store_bypass status: Vulnerable
           Type: spectre_v1 mitigation: __user pointer sanitization
           Type: spectre_v2 status: Vulnerable
           Type: srbds status: Not affected
           Type: tsx_async_abort status: Not affected
Graphics:  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700
           class-ID: hdmi
           Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700
           class-ID: hdmi
           Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu
           class-ID: gpu
           Display: server: No display server data found. Headless machine? tty: N/A
           Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:     Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700
           class-ID: hdmi
           Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700
           class-ID: hdmi
           Sound Server-1: ALSA v: k5.10.0-9-arm64 running: yes
Network:   Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A
           chip-ID: brcm:fd580000 class-ID: ethernet
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 
           IP v4:  type: dynamic scope: global broadcast: 
           IP v6:  type: dynamic mngtmpaddr scope: global
           IP v6:  type: dynamic mngtmpaddr scope: global
           IP v6:  scope: link
           Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A
           chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq
           IF-ID-1: br-3aa48f94cd8d state: up speed: 10000 Mbps duplex: unknown mac: 
           IP v4:  scope: global broadcast: 
           IP v6:  scope: link
           IF-ID-2: br-87d90ea0a7cc state: up speed: 10000 Mbps duplex: unknown mac: 
           IP v4:  scope: global broadcast: 
           IP v6:  scope: link
           IF-ID-3: docker0 state: down mac: 
           IP v4:  scope: global broadcast: 
           IF-ID-4: veth11d5347 state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-5: veth21869da state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-6: veth2bbb09a state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-7: veth34fa147 state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-8: veth4c1bac7 state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-9: veth8e8fe7d state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-10: vethbbd5872 state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-11: vethce364d9 state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-12: wlan0 state: down mac: 
           WAN IP: 
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
           Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block:
           hardware: no software: no address: see --recommends
           Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial
           Report: This feature requires one of these tools: hciconfig/bt-adapter
Logical:   Message: No logical block device data found.
RAID:      Message: No RAID data found.
Drives:    Local Storage: total: 238.47 GiB used: 53.66 GiB (22.5%)
           ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Realtek model: RTL9210B-CG
           size: 238.47 GiB block-size: physical: 512 B logical: 512 B type: N/A rev: 1.00 drive rev: 41025KLA temp: 45 Celsius C scheme: MBR
           SMART: yes health: PASSED on: 131d 14h cycles: 3,351 read-units: 16,432,334 [8.41 TB]
           written-units: 13,826,491 [7.07 TB]
           Message: No optical or floppy data found.
Partition: ID-1: / raw-size: 238.18 GiB size: 234.64 GiB (98.51%) used: 53.54 GiB (22.8%) fs: ext4
           block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT
           uuid: cbefaae9-9e43-46be-a039-4250306150f1
           ID-2: /boot/firmware raw-size: 296 MiB size: 295.8 MiB (99.94%) used: 125.5 MiB (42.4%)
           fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: RASPIFIRM uuid: 0D36-6DFC
Swap:      Alert: No swap data was found.
Unmounted: Message: No unmounted partitions found.
USB:       Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
           chip-ID: 1d6b:0002 class-ID: 0900
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA
           chip-ID: 2109:3431 class-ID: 0900
           Device-1: 1-1.3:3 info: Dell Model L100 Keyboard type: Keyboard
           driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s power: 70mA
           chip-ID: 413c:2105 class-ID: 0301
           Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003
           class-ID: 0900
           Device-1: 2-2:2 info: Realtek RTL9210 M.2 NVME Adapter type: Mass Storage driver: uas
           interfaces: 1 rev: 3.2 speed: 5 Gb/s power: 896mA chip-ID: 0bda:9210 class-ID: 0806
           Sensors:   Missing: Required tool sensors not installed. Check --recommends
Repos:     Packages: apt: 517 lib: 281
           Active apt repos in: /etc/apt/sources.list
           1: deb http: //deb.debian.org/debian bullseye main contrib non-free
           2: deb http: //security.debian.org/debian-security bullseye-security main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/docker.list
           1: deb [arch=arm64 signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https: //download.docker.com/linux/debian bullseye stable
           Active apt repos in: /etc/apt/sources.list.d/syncthing.list
           1: deb [signed-by=/usr/share/keyrings/syncthing-archive-keyring.gpg] https: //apt.syncthing.net/ syncthing stable
Processes: CPU top: 5 of 200
           1: cpu: 5.4% command: node pid: 2057 mem: 129.1 MiB (6.9%)
           2: cpu: 4.4% command: gunicorn started by: python pid: 2140 mem: 92.7 MiB (5.0%)
           3: cpu: 3.9% command: init pid: 1 mem: 10.1 MiB (0.5%)
           4: cpu: 2.9% command: moonraker.py started by: python pid: 506 mem: 33.3 MiB (1.8%)
           5: cpu: 2.3% command: traefik pid: 877 mem: 63.5 MiB (3.4%)
           Memory top: 5 of 200
           1: mem: 129.1 MiB (6.9%) command: node pid: 2057 cpu: 5.4%
           2: mem: 92.7 MiB (5.0%) command: gunicorn started by: python pid: 2140 cpu: 4.4%
           3: mem: 90.3 MiB (4.8%) command: gunicorn started by: python pid: 2178 cpu: 0.8%
           4: mem: 90.2 MiB (4.8%) command: gunicorn started by: python pid: 2180 cpu: 0.8%
           5: mem: 90.2 MiB (4.8%) command: gunicorn started by: python pid: 2181 cpu: 0.8%
Info:      Processes: 200 Uptime: 4m Init: systemd v: 247 runlevel: 5 tool: systemctl Compilers:
           gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.09

Benchmark #52985 - Brand: Toshiba XG4 Series