Benchmark #52987 - pibenchmarks.com

Brand: Kingston SSDNow V300
SSD (2.5" SATA)
#61 / 1,700
317
#666 / 1,700
#641 / 989
#166 / 370
6,198
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-11-23 10:03:47
#52,987
6,463
+265 (+4.10%)
Mateo
Kingston SSDNOW 120GB on Pi 4 using JMicron USA Technology Corp. JMS578 SATA 6Gb/s

Storage Details
Kingston SSDNow V300
SSD (2.5" SATA)
120G
SSD
Kingston
SV300S37A120G
3.00
5,000
152d:0578
0x152d (JMicron Technology Corp. / JMicron USA Technology Corp.)
0x0578 (JMS578 SATA 6Gb/s)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
N/A
4
1,500
500
1,600

Operating System

Debian GNU/Linux 11 (bullseye)
aarch64

Benchmark Results
194 MB/s
219.18 MB/s
157.39 MB/s
5,981 IOPS
4,462 IOPS
23,925 KB/s
17,851 KB/s
24,865 KB/s
21,752 KB/s
17,715 KB/s
25,254 KB/s

inxi Results
System: Host: rpi4-HA Kernel: 5.10.0-9-arm64 aarch64 bits: 64 compiler: gcc v: 10.2.1 parameters: video=HDMI-A-1:3840x2160M@30,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 dma.dmachans=0x37f5 bcm2709.boardrev=0xb03111 bcm2709.serial=0xc17ea562 bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 usb-storage.quirks=152d:0578:u console=tty0 console=ttyS1,115200 root=/dev/sda2 rw fsck.repair=yes net.ifnames=0 rootwait Console: pty pts/0 Distro: Debian GNU/Linux 11 (bullseye) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: N/A Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 1.8 GiB used: 1.37 GiB (75.8%) RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1000 2: 1000 3: 1000 4: 1000 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: No display server data found. Headless machine? tty: 150x40 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Sound Server-1: ALSA v: k5.10.0-9-arm64 running: yes Network: Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: down mac: XX:XX:XX:XX:XX:XX Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq IF-ID-1: docker0 state: up speed: 10000 Mbps duplex: unknown mac: XX:XX:XX:XX:XX:XX IP v4: 172.17.X.X/16 scope: global broadcast: 172.17.X.X IP v6: fe80::42:ff:fe65:dd4/64 scope: link IF-ID-2: hassio state: up speed: 10000 Mbps duplex: unknown mac: XX:XX:XX:XX:XX:XX IP v4: 172.30.X.X/23 scope: global broadcast: 172.30.X.X IP v6: fe80::42:3fff:fe3a:ce1/64 scope: link IF-ID-3: veth3466852 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-4: veth49beb4f state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-5: veth570de88 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-6: veth5c2ae78 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-7: veth694cdaa state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-8: veth6bd19ab state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-9: veth842e0ad state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-10: vetha13eaf8 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-11: vethc720ea5 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-12: vethe71aba6 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-13: vethed8dd46 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-14: vethf3fc2c6 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-15: vethf952ecc state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-16: wlan0 state: up mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: fe80::a59d:6cd8:694:a664/64 type: noprefixroute scope: link WAN IP: 88.18.X.X Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: hardware: no software: no address: see --recommends Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial Report: This feature requires one of these tools: hciconfig/bt-adapter Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 141.6 GiB used: 8.78 GiB (6.2%) ID-1: /dev/mmcblk1 maj-min: 179:0 vendor: Samsung model: EB1QT size: 29.81 GiB block-size: physical: 512 B logical: 512 B type: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Kingston model: SV300S37A120G family: Driven SSDs size: 111.79 GiB block-size: physical: 512 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s type: SSD drive rev: 3202 drive rev: 583ABBF0 temp: 30 C scheme: MBR SMART: yes state: enabled health: PASSED on: 31d 12h cycles: 773 read: 2173 GiB written: 1696 GiB Message: No optical or floppy data found. Partition: ID-1: / raw-size: 111.5 GiB size: 109.82 GiB (98.50%) used: 8.65 GiB (7.9%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT uuid: 899ea962-703a-49b8-926a-33b14329c638 ID-2: /boot/firmware raw-size: 296 MiB size: 295.8 MiB (99.93%) used: 126.3 MiB (42.7%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: RASPIFIRM uuid: 7F54-1442 Swap: Alert: No swap data was found. Unmounted: ID-1: /dev/mmcblk1p1 maj-min: 179:1 size: 256 MiB fs: vfat label: boot uuid: E183-6233 ID-2: /dev/mmcblk1p2 maj-min: 179:2 size: 29.56 GiB fs: ext4 label: rootfs uuid: 1232a209-2596-48f0-a078-731d10b918ad USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Device-1: 1-1.3:3 info: Texas Instruments CC2531 ZigBee type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 50mA chip-ID: 0451:16a8 class-ID: 0a00 __0X00124B0019387483 Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-1:2 info: JMicron / JMicron USA JMS578 SATA 6Gb/s type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 896mA chip-ID: 152d:0578 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 477 lib: 267 Active apt repos in: /etc/apt/sources.list 1: deb http://deb.debian.org/debian bullseye main contrib non-free 2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=arm64 signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https://download.docker.com/linux/debian bullseye stable Processes: CPU top: 5 of 254 1: cpu: 14.3% command: python3 pid: 5291 mem: 334.7 MiB (18.1%) 2: cpu: 3.3% command: python3 pid: 1484 mem: 102.7 MiB (5.5%) 3: cpu: 2.8% command: node-red pid: 7685 mem: 97.9 MiB (5.3%) 4: cpu: 1.8% command: pm2-runtime started by: node pid: 6639 mem: 27.0 MiB (1.4%) 5: cpu: 1.6% command: python3 pid: 6736 mem: 32.8 MiB (1.7%) Memory top: 5 of 254 1: mem: 334.7 MiB (18.1%) command: python3 pid: 5291 cpu: 14.3% 2: mem: 102.7 MiB (5.5%) command: python3 pid: 1484 cpu: 3.3% 3: mem: 97.9 MiB (5.3%) command: node-red pid: 7685 cpu: 2.8% 4: mem: 73.0 MiB (3.9%) command: dockerd pid: 616 cpu: 1.3% 5: mem: 63.4 MiB (3.4%) command: node pid: 7501 cpu: 1.6% Info: Processes: 254 Uptime: 11m Init: systemd v: 247 runlevel: 5 tool: systemctl Compilers: gcc: N/A Shell: Storage.sh default: Bash v: 5.1.4 running-in: pty pts/0 (SSH) inxi: 3.3.09

inxi Results

System:    Host: rpi4-HA Kernel: 5.10.0-9-arm64 aarch64 bits: 64 compiler: gcc v: 10.2.1
           parameters: video=HDMI-A-1:3840x2160M@30,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48
           dma.dmachans=0x37f5 bcm2709.boardrev=0xb03111 bcm2709.serial=0xc17ea562 bcm2709.uart_clock=48000000
           bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX
           vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 usb-storage.quirks=152d:0578:u console=tty0
           console=ttyS1,115200 root=/dev/sda2 rw fsck.repair=yes net.ifnames=0 rootwait
           Console: pty pts/0 Distro: Debian GNU/Linux 11 (bullseye)
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: N/A Battery:   Message: No system battery data found. Is one present?
Memory:    RAM: total: 1.8 GiB used: 1.37 GiB (75.8%)
           RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots: ARM: No ARM data found for this feature.
CPU:       Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3
           bogomips: 432
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1000 2: 1000 3: 1000 4: 1000
           Features: asimd cpuid crc32 evtstrm fp
           Vulnerabilities: Type: itlb_multihit status: Not affected
           Type: l1tf status: Not affected
           Type: mds status: Not affected
           Type: meltdown status: Not affected
           Type: spec_store_bypass status: Vulnerable
           Type: spectre_v1 mitigation: __user pointer sanitization
           Type: spectre_v2 status: Vulnerable
           Type: srbds status: Not affected
           Type: tsx_async_abort status: Not affected
Graphics:  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi
           Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi
           Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu
           Display: server: No display server data found. Headless machine? tty: 150x40
           Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:     Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi
           Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi
           Sound Server-1: ALSA v: k5.10.0-9-arm64 running: yes
Network:   Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet
           IF: eth0 state: down mac: XX:XX:XX:XX:XX:XX
           Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A
           chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq
           IF-ID-1: docker0 state: up speed: 10000 Mbps duplex: unknown mac: XX:XX:XX:XX:XX:XX
           IP v4: 172.17.X.X/16 scope: global broadcast: 172.17.X.X
           IP v6: fe80::42:ff:fe65:dd4/64 scope: link
           IF-ID-2: hassio state: up speed: 10000 Mbps duplex: unknown mac: XX:XX:XX:XX:XX:XX
           IP v4: 172.30.X.X/23 scope: global broadcast: 172.30.X.X
           IP v6: fe80::42:3fff:fe3a:ce1/64 scope: link
           IF-ID-3: veth3466852 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
           IF-ID-4: veth49beb4f state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
           IF-ID-5: veth570de88 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
           IF-ID-6: veth5c2ae78 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
           IF-ID-7: veth694cdaa state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
           IF-ID-8: veth6bd19ab state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
           IF-ID-9: veth842e0ad state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
           IF-ID-10: vetha13eaf8 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
           IF-ID-11: vethc720ea5 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
           IF-ID-12: vethe71aba6 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
           IF-ID-13: vethed8dd46 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
           IF-ID-14: vethf3fc2c6 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
           IF-ID-15: vethf952ecc state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
           IF-ID-16: wlan0 state: up mac: XX:XX:XX:XX:XX:XX
           IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X
           IP v6: fe80::a59d:6cd8:694:a664/64 type: noprefixroute scope: link
           WAN IP: 88.18.X.X
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
           Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: hardware: no software: no
           address: see --recommends
           Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial
           Report: This feature requires one of these tools: hciconfig/bt-adapter
Logical:   Message: No logical block device data found.
RAID:      Message: No RAID data found.
Drives:    Local Storage: total: 141.6 GiB used: 8.78 GiB (6.2%)
           ID-1: /dev/mmcblk1 maj-min: 179:0 vendor: Samsung model: EB1QT size: 29.81 GiB block-size: physical: 512 B
           logical: 512 B type: SSD scheme: MBR
           SMART Message: Unknown smartctl error. Unable to generate data.
           ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Kingston model: SV300S37A120G family: Driven SSDs size: 111.79 GiB
           block-size: physical: 512 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s type: SSD            drive rev: 3202 drive rev: 583ABBF0 temp: 30 C scheme: MBR
           SMART: yes state: enabled health: PASSED on: 31d 12h cycles: 773 read: 2173 GiB written: 1696 GiB
           Message: No optical or floppy data found.
Partition: ID-1: / raw-size: 111.5 GiB size: 109.82 GiB (98.50%) used: 8.65 GiB (7.9%) fs: ext4 block-size: 4096 B
           dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT uuid: 899ea962-703a-49b8-926a-33b14329c638
           ID-2: /boot/firmware raw-size: 296 MiB size: 295.8 MiB (99.93%) used: 126.3 MiB (42.7%) fs: vfat block-size: 512 B
           dev: /dev/sda1 maj-min: 8:1 label: RASPIFIRM uuid: 7F54-1442
Swap:      Alert: No swap data was found.
Unmounted: ID-1: /dev/mmcblk1p1 maj-min: 179:1 size: 256 MiB fs: vfat label: boot uuid: E183-6233
           ID-2: /dev/mmcblk1p2 maj-min: 179:2 size: 29.56 GiB fs: ext4 label: rootfs
           uuid: 1232a209-2596-48f0-a078-731d10b918ad
USB:       Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900
           Device-1: 1-1.3:3 info: Texas Instruments CC2531 ZigBee type: Abstract (modem),CDC-Data driver: cdc_acm
           interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 50mA chip-ID: 0451:16a8 class-ID: 0a00 __0X00124B0019387483
           Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900
           Device-1: 2-1:2 info: JMicron / JMicron USA JMS578 SATA 6Gb/s type: Mass Storage driver: usb-storage interfaces: 1
           rev: 3.0 speed: 5 Gb/s power: 896mA chip-ID: 152d:0578 class-ID: 0806 Sensors:   Missing: Required tool sensors not installed. Check --recommends
Repos:     Packages: apt: 477 lib: 267
           Active apt repos in: /etc/apt/sources.list
           1: deb http://deb.debian.org/debian bullseye main contrib non-free
           2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/docker.list
           1: deb [arch=arm64 signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https://download.docker.com/linux/debian bullseye stable
Processes: CPU top: 5 of 254
           1: cpu: 14.3% command: python3 pid: 5291 mem: 334.7 MiB (18.1%)
           2: cpu: 3.3% command: python3 pid: 1484 mem: 102.7 MiB (5.5%)
           3: cpu: 2.8% command: node-red pid: 7685 mem: 97.9 MiB (5.3%)
           4: cpu: 1.8% command: pm2-runtime started by: node pid: 6639 mem: 27.0 MiB (1.4%)
           5: cpu: 1.6% command: python3 pid: 6736 mem: 32.8 MiB (1.7%)
           Memory top: 5 of 254
           1: mem: 334.7 MiB (18.1%) command: python3 pid: 5291 cpu: 14.3%
           2: mem: 102.7 MiB (5.5%) command: python3 pid: 1484 cpu: 3.3%
           3: mem: 97.9 MiB (5.3%) command: node-red pid: 7685 cpu: 2.8%
           4: mem: 73.0 MiB (3.9%) command: dockerd pid: 616 cpu: 1.3%
           5: mem: 63.4 MiB (3.4%) command: node pid: 7501 cpu: 1.6%
Info:      Processes: 254 Uptime: 11m Init: systemd v: 247 runlevel: 5 tool: systemctl Compilers: gcc: N/A Shell: Storage.sh
           default: Bash v: 5.1.4 running-in: pty pts/0 (SSH) inxi: 3.3.09

Benchmark #52987 - Brand: Kingston SSDNow V300