Benchmark #53043 - pibenchmarks.com

Brand: Samsung 980
SSD (M.2 NVMe)
#9 / 1,672
844
#163 / 1,672
#162 / 983
#151 / 280
30,865
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-11-24 13:31:37
#53,043
16,852
-14,013 (-83.15%)
changeforabutton
Samsung 980 on Pi CM4 using Tofu board

Storage Details
Samsung 980
SSD (M.2 NVMe)
931.3G
SSD
Samsung
SSD9801TB
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi Compute Module 4 1.0
Raspberry Pi Compute Module 4 Rev 1.0
Raspberry Pi Foundation
N/A
4
1,500
500
1,600

Operating System

Debian GNU/Linux 10 (buster)
aarch64

Benchmark Results
170 MB/s
359.96 MB/s
359.63 MB/s
13,161 IOPS
46,545 IOPS
52,647 KB/s
186,181 KB/s
89,959 KB/s
55,798 KB/s
46,307 KB/s
86,242 KB/s

inxi Results
System: Kernel: 5.10.63-v8+ aarch64 bits: 64 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty1 root=PARTUUID=89ef5e9e-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 1 DM: LightDM 1.26.0 Distro: Raspberry Pi OS base: Debian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi Compute Module 4 Rev 1.0 details: BCM2835 rev: d03140 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 7.7 GiB used: 419.1 MiB (5.3%) gpu: 76 MiB RAM Report: no-data: dmidecode is not allowed to read /dev/mem PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 bogomips: 432 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2708-fb driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: fb Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: X.org 1.20.4 driver: loaded: fbdev,modesetting tty: 80x25 Message: Advanced graphics data unavailable in console for root. Audio: Device-1: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-2: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: PulseAudio v: 12.2 running: no Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Bluetooth: Message: No bluetooth data found. Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 931.51 GiB used: 21.53 GiB (2.3%) ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: SSD 980 1TB size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD rev: 1B4QFXO7 temp: 35 C scheme: MBR SMART: yes health: PASSED on: 5 hrs cycles: 115 read-units: 81,568 [41.7 GB] written-units: 220,619 [112 GB] Message: No optical or floppy data found. Partition: ID-1: / raw-size: 931.26 GiB size: 915.64 GiB (98.32%) used: 21.48 GiB (2.3%) fs: ext4 block-size: 4096 B dev: /dev/nvme0n1p2 maj-min: 259:2 label: rootfs uuid: 1d91ff59-94c1-4271-a4d5-fdf142647058 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 49.7 MiB (19.7%) fs: vfat block-size: 512 B dev: /dev/nvme0n1p1 maj-min: 259:1 label: boot uuid: 71DB-60DA Swap: Kernel: swappiness: 90 (default 60) cache-pressure: 500 (default 100) ID-1: swap-1 type: file size: 1.91 GiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 0424:2514 class-ID: 0900 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: 1496 note: see --pkg apt: 1492 lib: 740 snap: 4 Active apt repos in: /etc/apt/sources.list 1: deb http: //deb.debian.org/debian buster main contrib non-free 2: deb http: //deb.debian.org/debian-security/ buster/updates main contrib non-free 3: deb http: //deb.debian.org/debian buster-updates main contrib non-free Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 133 1: cpu: 5.6% command: snapd pid: 1006 mem: 32.9 MiB (0.4%) 2: cpu: 1.4% command: init pid: 1 mem: 9.65 MiB (0.1%) 3: cpu: 1.1% command: [kworker/u8:1-events_unbound] pid: 2008 mem: 0.00 MiB (0.0%) 4: cpu: 0.7% command: [kworker/2:3-mm_percpu_wq] pid: 3943 mem: 0.00 MiB (0.0%) 5: cpu: 0.4% command: bash pid: 4033 mem: 3.17 MiB (0.0%) Memory top: 5 of 133 1: mem: 32.9 MiB (0.4%) command: snapd pid: 1006 cpu: 5.6% 2: mem: 18.9 MiB (0.2%) command: unattended-upgrade-shutdown started by: python3 pid: 482 cpu: 0.0% 3: mem: 14.4 MiB (0.1%) command: packagekitd pid: 2001 cpu: 0.0% 4: mem: 12.5 MiB (0.1%) command: udisksd pid: 380 cpu: 0.0% 5: mem: 9.65 MiB (0.1%) command: init pid: 1 cpu: 1.4% Info: Processes: 133 Uptime: 8m Init: systemd v: 241 runlevel: 5 target: graphical.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.09

inxi Results

System:    Kernel: 5.10.63-v8+ aarch64 bits: 64 compiler: N/A
           parameters: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0
           snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0
           bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000
           vc_mem.mem_size=0x40000000 console=tty1 root=PARTUUID=89ef5e9e-02 rootfstype=ext4
           elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
           Console: tty 1 DM: LightDM 1.26.0 Distro: Raspberry Pi OS
           base: Debian GNU/Linux 10 (buster)
Machine:   Type: ARM Device System: Raspberry Pi Compute Module 4 Rev 1.0 details: BCM2835
           rev: d03140 Battery:   Message: No system battery data found. Is one present?
Memory:    RAM: total: 7.7 GiB used: 419.1 MiB (5.3%) gpu: 76 MiB
           RAM Report: no-data: dmidecode is not allowed to read /dev/mem
PCI Slots: ARM: No ARM data found for this feature.
CPU:       Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8
           model-id: 0 stepping: 3 bogomips: 432
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500
           4: 1500
           Features: asimd cpuid crc32 evtstrm fp
           Vulnerabilities: Type: itlb_multihit status: Not affected
           Type: l1tf status: Not affected
           Type: mds status: Not affected
           Type: meltdown status: Not affected
           Type: spec_store_bypass status: Vulnerable
           Type: spectre_v1 mitigation: __user pointer sanitization
           Type: spectre_v2 status: Vulnerable
           Type: srbds status: Not affected
           Type: tsx_async_abort status: Not affected
Graphics:  Device-1: bcm2708-fb driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: fb
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Display: server: X.org 1.20.4 driver: loaded: fbdev,modesetting tty: 80x25
           Message: Advanced graphics data unavailable in console for root.
Audio:     Device-1: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Device-2: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Sound Server-1: PulseAudio v: 12.2 running: no
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A
           chip-ID: brcm:fe300000 class-ID: mmcnr
           Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A
           chip-ID: brcm:fd580000 class-ID: ethernet
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 
           IP v4:  type: dynamic noprefixroute scope: global broadcast: 
           IP v6:  scope: link
           WAN IP: 
Bluetooth: Message: No bluetooth data found.
Logical:   Message: No logical block device data found.
RAID:      Message: No RAID data found.
Drives:    Local Storage: total: 931.51 GiB used: 21.53 GiB (2.3%)
           ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: SSD 980 1TB size: 931.51 GiB
           block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD
           rev: 1B4QFXO7 temp: 35 C scheme: MBR
           SMART: yes health: PASSED on: 5 hrs cycles: 115 read-units: 81,568 [41.7 GB]
           written-units: 220,619 [112 GB]
           Message: No optical or floppy data found.
Partition: ID-1: / raw-size: 931.26 GiB size: 915.64 GiB (98.32%) used: 21.48 GiB (2.3%) fs: ext4
           block-size: 4096 B dev: /dev/nvme0n1p2 maj-min: 259:2 label: rootfs
           uuid: 1d91ff59-94c1-4271-a4d5-fdf142647058
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 49.7 MiB (19.7%) fs: vfat
           block-size: 512 B dev: /dev/nvme0n1p1 maj-min: 259:1 label: boot uuid: 71DB-60DA
Swap:      Kernel: swappiness: 90 (default 60) cache-pressure: 500 (default 100)
           ID-1: swap-1 type: file size: 1.91 GiB used: 0 KiB (0.0%) priority: -2 file: /var/swap
Unmounted: Message: No unmounted partitions found.
USB:       Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
           chip-ID: 1d6b:0002 class-ID: 0900
           Hub-2: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s
           power: 2mA chip-ID: 0424:2514 class-ID: 0900
Sensors:   Missing: Required tool sensors not installed. Check --recommends
Repos:     Packages: 1496 note: see --pkg apt: 1492 lib: 740 snap: 4
           Active apt repos in: /etc/apt/sources.list
           1: deb http: //deb.debian.org/debian buster main contrib non-free
           2: deb http: //deb.debian.org/debian-security/ buster/updates main contrib non-free
           3: deb http: //deb.debian.org/debian buster-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/raspi.list
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           No active apt repos in: /etc/apt/sources.list.d/vscode.list
Processes: CPU top: 5 of 133
           1: cpu: 5.6% command: snapd pid: 1006 mem: 32.9 MiB (0.4%)
           2: cpu: 1.4% command: init pid: 1 mem: 9.65 MiB (0.1%)
           3: cpu: 1.1% command: [kworker/u8:1-events_unbound] pid: 2008 mem: 0.00 MiB (0.0%)
           4: cpu: 0.7% command: [kworker/2:3-mm_percpu_wq] pid: 3943 mem: 0.00 MiB (0.0%)
           5: cpu: 0.4% command: bash pid: 4033 mem: 3.17 MiB (0.0%)
           Memory top: 5 of 133
           1: mem: 32.9 MiB (0.4%) command: snapd pid: 1006 cpu: 5.6%
           2: mem: 18.9 MiB (0.2%) command: unattended-upgrade-shutdown started by: python3
           pid: 482 cpu: 0.0%
           3: mem: 14.4 MiB (0.1%) command: packagekitd pid: 2001 cpu: 0.0%
           4: mem: 12.5 MiB (0.1%) command: udisksd pid: 380 cpu: 0.0%
           5: mem: 9.65 MiB (0.1%) command: init pid: 1 cpu: 1.4%
Info:      Processes: 133 Uptime: 8m Init: systemd v: 241 runlevel: 5 target: graphical.target
           tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release
           inxi: 3.3.09

Benchmark #53043 - Brand: Samsung 980