Benchmark #53330 - pibenchmarks.com

Brand: SanDisk Extreme Pro USB
SSD (Portable)
#42 / 1,539
272
#872 / 1,539
#801 / 875
#123 / 137
3,262
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-12-01 12:11:50
#53,330
3,340
+78 (+2.34%)
Anonymous

Storage Details
SanDisk Extreme Pro USB
SSD (Portable)
128G
SSD
SanDisk
pSSD
1.8 inch
SATA
3.00
5,000
1d6b:5588
0x1d6b (Linux Foundation)
0x5588
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
N/A
4
1,500
500
1,600

Operating System

Debian GNU/Linux 10 (buster)
aarch64

Benchmark Results
89.2 MB/s
200.28 MB/s
167.56 MB/s
2,757 IOPS
2,677 IOPS
11,031 KB/s
10,711 KB/s
24,767 KB/s
19,340 KB/s
10,925 KB/s
11,681 KB/s

inxi Results
System: Kernel: 5.10.63-v8+ aarch64 bits: 64 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=ec27de04-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory Console: tty 1 DM: LightDM 1.26.0 Distro: Raspberry Pi OS base: Debian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 1.88 GiB used: 801.3 MiB (41.6%) gpu: 76 MiB RAM Report: no-data: dmidecode is not allowed to read /dev/mem PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 bogomips: 432 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: X.org 1.20.4 driver: loaded: fbdev unloaded: modesetting tty: 80x25 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.63-v8+ running: yes Sound Server-2: PulseAudio v: 12.2 running: no Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: down mac: Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-1: br-562f1e8f53b4 state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: docker0 state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-3: veth8970549 state: up speed: 10000 Mbps duplex: full mac: IF-ID-4: vetha0955ee state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: vethaf6bc7c state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: vethd8c2490 state: up speed: 10000 Mbps duplex: full mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept service-classes: capturing, telephony Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 119.25 GiB used: 12.94 GiB (10.9%) ID-1: /dev/sda maj-min: 8:0 type: USB vendor: SanDisk model: Extreme Pro drive model: pSSD family: based SSDs size: 119.25 GiB block-size: physical: 512 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s type: SSD rev: 6EB 1030 temp: 8 C scheme: MBR SMART: yes state: enabled health: FAILED! read: 0 KiB written: 0 KiB Pre-Fail: attribute: Perc_Avail_Resrvd_Space threshold: 5 alert: FAILING_NOW Message: No optical or floppy data found. Partition: ID-1: / raw-size: 119 GiB size: 117.09 GiB (98.40%) used: 12.91 GiB (11.0%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: eae7cc40-f1d2-4bf1-8b9b-ccab61498abe ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 30.3 MiB (12.0%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: F8C9-55AB Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-2:2 info: SanDisk type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip-ID: 0781:5588 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 1446 lib: 721 Active apt repos in: /etc/apt/sources.list 1: deb http: //deb.debian.org/debian buster main contrib non-free 2: deb http: //deb.debian.org/debian-security/ buster/updates main contrib non-free 3: deb http: //deb.debian.org/debian buster-updates main contrib non-free Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=arm64] https: //download.docker.com/linux/debian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 217 1: cpu: 18.3% command: octoprint started by: python3 pid: 487 mem: 134.4 MiB (7.2%) 2: cpu: 13.5% command: jackett pid: 2288 mem: 126.5 MiB (6.8%) 3: cpu: 6.2% command: node-red pid: 2815 mem: 99.6 MiB (5.3%) 4: cpu: 3.7% command: init pid: 1 mem: 9.60 MiB (0.5%) 5: cpu: 3.0% command: beam.smp pid: 3976 mem: 125.4 MiB (6.7%) Memory top: 5 of 217 1: mem: 134.4 MiB (7.2%) command: octoprint started by: python3 pid: 487 cpu: 18.3% 2: mem: 126.5 MiB (6.8%) command: jackett pid: 2288 cpu: 13.5% 3: mem: 125.4 MiB (6.7%) command: beam.smp pid: 3976 cpu: 3.0% 4: mem: 99.6 MiB (5.3%) command: node-red pid: 2815 cpu: 6.2% 5: mem: 73.0 MiB (3.9%) command: dockerd pid: 569 cpu: 1.1% Info: Processes: 217 Uptime: 2m Init: systemd v: 241 runlevel: 5 target: graphical.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.09

inxi Results

System:    Kernel: 5.10.63-v8+ aarch64 bits: 64 compiler: N/A
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0
           snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000
           vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=ec27de04-02
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash
           plymouth.ignore-serial-consoles cgroup_enable=cpuset cgroup_memory=1
           cgroup_enable=memory
           Console: tty 1 DM: LightDM 1.26.0 Distro: Raspberry Pi OS
           base: Debian GNU/Linux 10 (buster)
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111
           Battery:   Message: No system battery data found. Is one present?
Memory:    RAM: total: 1.88 GiB used: 801.3 MiB (41.6%) gpu: 76 MiB
           RAM Report: no-data: dmidecode is not allowed to read /dev/mem
PCI Slots: ARM: No ARM data found for this feature.
CPU:       Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8
           model-id: 0 stepping: 3 bogomips: 432
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500
           4: 1500
           Features: asimd cpuid crc32 evtstrm fp
           Vulnerabilities: Type: itlb_multihit status: Not affected
           Type: l1tf status: Not affected
           Type: mds status: Not affected
           Type: meltdown status: Not affected
           Type: spec_store_bypass status: Vulnerable
           Type: spectre_v1 mitigation: __user pointer sanitization
           Type: spectre_v2 status: Vulnerable
           Type: srbds status: Not affected
           Type: tsx_async_abort status: Not affected
Graphics:  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu
           class-ID: gpu
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Display: server: X.org 1.20.4 driver: loaded: fbdev unloaded: modesetting tty: 80x25
           Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio
           class-ID: bcm2835_audio
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Sound Server-1: ALSA v: k5.10.63-v8+ running: yes
           Sound Server-2: PulseAudio v: 12.2 running: no
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A
           chip-ID: brcm:fe300000 class-ID: mmcnr
           IF: wlan0 state: down mac: 
           Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A
           chip-ID: brcm:fd580000 class-ID: ethernet
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 
           IP v4:  type: noprefixroute scope: global broadcast: 
           IP v6:  scope: link
           IF-ID-1: br-562f1e8f53b4 state: up speed: 10000 Mbps duplex: unknown mac: 
           IP v4:  scope: global broadcast: 
           IP v6:  scope: link
           IF-ID-2: docker0 state: up speed: 10000 Mbps duplex: unknown mac: 
           IP v4:  scope: global broadcast: 
           IP v6:  scope: link
           IF-ID-3: veth8970549 state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-4: vetha0955ee state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-5: vethaf6bc7c state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-6: vethd8c2490 state: up speed: 10000 Mbps duplex: full mac: 
           WAN IP: 
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
           Report: hciconfig ID: hci0 rfk-id: 1 state: up address:  bt-v: 3.0 lmp-v: 5.0
           sub-v: 6119 hci-v: 5.0 rev: 156
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept
           service-classes: capturing, telephony
Logical:   Message: No logical block device data found.
RAID:      Message: No RAID data found.
Drives:    Local Storage: total: 119.25 GiB used: 12.94 GiB (10.9%)
           ID-1: /dev/sda maj-min: 8:0 type: USB vendor: SanDisk model: Extreme Pro
           drive model: pSSD family: based SSDs size: 119.25 GiB block-size: physical: 512 B
           logical: 512 B sata: 3.0 speed: 6.0 Gb/s type: SSD rev: 6EB 1030 temp: 8 C scheme: MBR
           SMART: yes state: enabled health: FAILED! read: 0 KiB written: 0 KiB Pre-Fail:
           attribute: Perc_Avail_Resrvd_Space threshold: 5 alert: FAILING_NOW
           Message: No optical or floppy data found.
Partition: ID-1: / raw-size: 119 GiB size: 117.09 GiB (98.40%) used: 12.91 GiB (11.0%) fs: ext4
           block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs
           uuid: eae7cc40-f1d2-4bf1-8b9b-ccab61498abe
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 30.3 MiB (12.0%) fs: vfat
           block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: F8C9-55AB
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
           ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap
Unmounted: Message: No unmounted partitions found.
USB:       Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
           chip-ID: 1d6b:0002 class-ID: 0900
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA
           chip-ID: 2109:3431 class-ID: 0900
           Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003
           class-ID: 0900
           Device-1: 2-2:2 info: SanDisk type: Mass Storage driver: usb-storage interfaces: 1
           rev: 3.0 speed: 5 Gb/s chip-ID: 0781:5588 class-ID: 0806 Sensors:   Missing: Required tool sensors not installed. Check --recommends
Repos:     Packages: apt: 1446 lib: 721
           Active apt repos in: /etc/apt/sources.list
           1: deb http: //deb.debian.org/debian buster main contrib non-free
           2: deb http: //deb.debian.org/debian-security/ buster/updates main contrib non-free
           3: deb http: //deb.debian.org/debian buster-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/docker.list
           1: deb [arch=arm64] https: //download.docker.com/linux/debian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           No active apt repos in: /etc/apt/sources.list.d/vscode.list
Processes: CPU top: 5 of 217
           1: cpu: 18.3% command: octoprint started by: python3 pid: 487 mem: 134.4 MiB (7.2%)
           2: cpu: 13.5% command: jackett pid: 2288 mem: 126.5 MiB (6.8%)
           3: cpu: 6.2% command: node-red pid: 2815 mem: 99.6 MiB (5.3%)
           4: cpu: 3.7% command: init pid: 1 mem: 9.60 MiB (0.5%)
           5: cpu: 3.0% command: beam.smp pid: 3976 mem: 125.4 MiB (6.7%)
           Memory top: 5 of 217
           1: mem: 134.4 MiB (7.2%) command: octoprint started by: python3 pid: 487 cpu: 18.3%
           2: mem: 126.5 MiB (6.8%) command: jackett pid: 2288 cpu: 13.5%
           3: mem: 125.4 MiB (6.7%) command: beam.smp pid: 3976 cpu: 3.0%
           4: mem: 99.6 MiB (5.3%) command: node-red pid: 2815 cpu: 6.2%
           5: mem: 73.0 MiB (3.9%) command: dockerd pid: 569 cpu: 1.1%
Info:      Processes: 217 Uptime: 2m Init: systemd v: 241 runlevel: 5 target: graphical.target
           tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release
           inxi: 3.3.09

Benchmark #53330 - Brand: SanDisk Extreme Pro USB