Benchmark #53344 - pibenchmarks.com

Brand: Samsung 980
SSD (M.2 NVMe)
#14 / 1,539
595
#26 / 1,539
#26 / 875
#25 / 194
26,448
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-12-01 18:32:26
#53,344
21,625
-4,823 (-22.30%)
changeforabutton
Samsung 980 on CM4 @ 2.2ghz using IO Board and Xiwai NGFF M-Key NVME SSD to PCI-e 3.0 x1

Storage Details
Samsung 980
SSD (M.2 NVMe)
931.3G
SSD
Samsung
SSD9801TB
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi Compute Module 4 1.0
Raspberry Pi Compute Module 4 Rev 1.0
Raspberry Pi Foundation
N/A
4
2,200 (+700)
500
1,600

Operating System

Debian GNU/Linux 11 (bullseye)
aarch64

Benchmark Results
194 MB/s
365.6 MB/s
356.71 MB/s
20,500 IOPS
66,710 IOPS
82,002 KB/s
266,840 KB/s
116,592 KB/s
74,962 KB/s
52,006 KB/s
109,248 KB/s

inxi Results
System: Kernel: 5.10.82-v8+ aarch64 bits: 64 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 console=ttyAMA0,115200 console=tty1 root=PARTUUID=1e225bf7-02 rootfstype=ext4 fsck.repair=yes rootwait Console: tty 1 Distro: Raspberry Pi OS base: Debian GNU/Linux 11 (bullseye) Machine: Type: ARM Device System: Raspberry Pi Compute Module 4 Rev 1.0 details: BCM2835 rev: d03140 Memory: RAM: total: 7.69 GiB used: 320.9 MiB (4.1%) gpu: 16 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 bogomips: 432 Speed: 2200 MHz min/max: 1400/2200 MHz Core speeds (MHz): 1: 2200 2: 2200 3: 2200 4: 2200 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc class-ID: fb Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: No display server data found. Headless machine? tty: 240x67 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-2: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: WAN IP: Bluetooth: Message: No bluetooth data found. Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 938.79 GiB used: 4.23 GiB (0.5%) ID-1: /dev/mmcblk0 maj-min: 179:0 model: 8GTF4R size: 7.28 GiB block-size: physical: 512 B logical: 512 B type: SSD rev: 0x8 scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: SSD 980 1TB size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD rev: 1B4QFXO7 temp: 31 C scheme: MBR SMART: yes health: PASSED on: 6 hrs cycles: 167 read-units: 131,890 [67.5 GB] written-units: 320,974 [164 GB] Message: No optical or floppy data found. Partition: ID-1: / raw-size: 931.26 GiB size: 917.32 GiB (98.50%) used: 4.19 GiB (0.5%) fs: ext4 block-size: 4096 B dev: /dev/nvme0n1p2 maj-min: 259:2 label: rootfs uuid: b73b1dc9-6e12-4e68-9d06-1a1892663226 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 49.1 MiB (19.5%) fs: vfat block-size: 512 B dev: /dev/nvme0n1p1 maj-min: 259:1 label: boot uuid: DBF3-0E3A Swap: Kernel: swappiness: 1 (default 60) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 1.92 GiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p1 maj-min: 179:1 size: 256 MiB fs: vfat label: boot uuid: DBF3-0E3A ID-2: /dev/mmcblk0p2 maj-min: 179:2 size: 7.03 GiB fs: ext4 label: rootfs uuid: b73b1dc9-6e12-4e68-9d06-1a1892663226 USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: Microchip (formerly SMSC) USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 0424:2514 class-ID: 0900 Device-1: 1-1.1:3 info: Holtek DasKeyboard type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s power: 100mA chip-ID: 04d9:1919 class-ID: 0300 Hub-3: 1-1.2:4 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 100mA chip-ID: 05e3:0608 class-ID: 0900 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 588 lib: 307 Active apt repos in: /etc/apt/sources.list 1: deb http: //deb.debian.org/debian bullseye main contrib non-free 2: deb http: //security.debian.org/debian-security bullseye-security main contrib non-free 3: deb http: //deb.debian.org/debian bullseye-updates main contrib non-free Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ bullseye main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 131 1: cpu: 1.4% command: init pid: 1 mem: 9.73 MiB (0.1%) 2: cpu: 1.1% command: [kworker/0:2-events_power_efficient] pid: 35 mem: 0.00 MiB (0.0%) 3: cpu: 0.8% command: packagekitd pid: 1087 mem: 18.0 MiB (0.2%) 4: cpu: 0.3% command: fail2ban-server started by: python3 pid: 536 mem: 19.8 MiB (0.2%) 5: cpu: 0.2% command: systemd-journald pid: 143 mem: 14.3 MiB (0.1%) Memory top: 5 of 131 1: mem: 19.9 MiB (0.2%) command: unattended-upgrade-shutdown started by: python3 pid: 540 cpu: 0.1% 2: mem: 19.8 MiB (0.2%) command: fail2ban-server started by: python3 pid: 536 cpu: 0.3% 3: mem: 18.0 MiB (0.2%) command: packagekitd pid: 1087 cpu: 0.8% 4: mem: 14.3 MiB (0.1%) command: systemd-journald pid: 143 cpu: 0.2% 5: mem: 9.73 MiB (0.1%) command: init pid: 1 cpu: 1.4% Info: Processes: 131 Uptime: 2m Init: systemd v: 247 runlevel: 3 target: multi-user.target tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.09

inxi Results

System:    Kernel: 5.10.82-v8+ aarch64 bits: 64 compiler: N/A
           parameters: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0
           snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080
           bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX
           vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 console=ttyAMA0,115200
           console=tty1 root=PARTUUID=1e225bf7-02 rootfstype=ext4 fsck.repair=yes rootwait
           Console: tty 1 Distro: Raspberry Pi OS base: Debian GNU/Linux 11 (bullseye)
Machine:   Type: ARM Device System: Raspberry Pi Compute Module 4 Rev 1.0 details: BCM2835
           rev: d03140 Memory:    RAM: total: 7.69 GiB used: 320.9 MiB (4.1%) gpu: 16 MiB
           RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots: ARM: No ARM data found for this feature.
CPU:       Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8
           model-id: 0 stepping: 3 bogomips: 432
           Speed: 2200 MHz min/max: 1400/2200 MHz Core speeds (MHz): 1: 2200 2: 2200 3: 2200
           4: 2200
           Features: asimd cpuid crc32 evtstrm fp
           Vulnerabilities: Type: itlb_multihit status: Not affected
           Type: l1tf status: Not affected
           Type: mds status: Not affected
           Type: meltdown status: Not affected
           Type: spec_store_bypass status: Vulnerable
           Type: spectre_v1 mitigation: __user pointer sanitization
           Type: spectre_v2 status: Vulnerable
           Type: srbds status: Not affected
           Type: tsx_async_abort status: Not affected
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc
           class-ID: fb
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Display: server: No display server data found. Headless machine? tty: 240x67
           Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:     Device-1: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Device-2: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A
           chip-ID: brcm:fe300000 class-ID: mmcnr
           IF: wlan0 state: up mac: 
           IP v4:  type: dynamic noprefixroute scope: global broadcast: 
           Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A
           chip-ID: brcm:fd580000 class-ID: ethernet
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 
           IP v4:  type: noprefixroute scope: global broadcast: 
           WAN IP: 
Bluetooth: Message: No bluetooth data found.
Logical:   Message: No logical block device data found.
RAID:      Message: No RAID data found.
Drives:    Local Storage: total: 938.79 GiB used: 4.23 GiB (0.5%)
           ID-1: /dev/mmcblk0 maj-min: 179:0 model: 8GTF4R size: 7.28 GiB block-size:
           physical: 512 B logical: 512 B type: SSD rev: 0x8 scheme: MBR
           SMART Message: Unknown smartctl error. Unable to generate data.
           ID-2: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: SSD 980 1TB size: 931.51 GiB
           block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD
           rev: 1B4QFXO7 temp: 31 C scheme: MBR
           SMART: yes health: PASSED on: 6 hrs cycles: 167 read-units: 131,890 [67.5 GB]
           written-units: 320,974 [164 GB]
           Message: No optical or floppy data found.
Partition: ID-1: / raw-size: 931.26 GiB size: 917.32 GiB (98.50%) used: 4.19 GiB (0.5%) fs: ext4
           block-size: 4096 B dev: /dev/nvme0n1p2 maj-min: 259:2 label: rootfs
           uuid: b73b1dc9-6e12-4e68-9d06-1a1892663226
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 49.1 MiB (19.5%) fs: vfat
           block-size: 512 B dev: /dev/nvme0n1p1 maj-min: 259:1 label: boot uuid: DBF3-0E3A
Swap:      Kernel: swappiness: 1 (default 60) cache-pressure: 100 (default)
           ID-1: swap-1 type: file size: 1.92 GiB used: 0 KiB (0.0%) priority: -2 file: /var/swap
Unmounted: ID-1: /dev/mmcblk0p1 maj-min: 179:1 size: 256 MiB fs: vfat label: boot uuid: DBF3-0E3A
           ID-2: /dev/mmcblk0p2 maj-min: 179:2 size: 7.03 GiB fs: ext4 label: rootfs
           uuid: b73b1dc9-6e12-4e68-9d06-1a1892663226
USB:       Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
           chip-ID: 1d6b:0002 class-ID: 0900
           Hub-2: 1-1:2 info: Microchip (formerly SMSC) USB 2.0 Hub ports: 4 rev: 2.0
           speed: 480 Mb/s power: 2mA chip-ID: 0424:2514 class-ID: 0900
           Device-1: 1-1.1:3 info: Holtek DasKeyboard type: Keyboard,HID
           driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s power: 100mA
           chip-ID: 04d9:1919 class-ID: 0300
           Hub-3: 1-1.2:4 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 100mA
           chip-ID: 05e3:0608 class-ID: 0900
Sensors:   Missing: Required tool sensors not installed. Check --recommends
Repos:     Packages: apt: 588 lib: 307
           Active apt repos in: /etc/apt/sources.list
           1: deb http: //deb.debian.org/debian bullseye main contrib non-free
           2: deb http: //security.debian.org/debian-security bullseye-security main contrib non-free
           3: deb http: //deb.debian.org/debian bullseye-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/raspi.list
           1: deb http: //archive.raspberrypi.org/debian/ bullseye main
           No active apt repos in: /etc/apt/sources.list.d/vscode.list
Processes: CPU top: 5 of 131
           1: cpu: 1.4% command: init pid: 1 mem: 9.73 MiB (0.1%)
           2: cpu: 1.1% command: [kworker/0:2-events_power_efficient] pid: 35 mem: 0.00 MiB (0.0%)
           3: cpu: 0.8% command: packagekitd pid: 1087 mem: 18.0 MiB (0.2%)
           4: cpu: 0.3% command: fail2ban-server started by: python3 pid: 536 mem: 19.8 MiB (0.2%)
           5: cpu: 0.2% command: systemd-journald pid: 143 mem: 14.3 MiB (0.1%)
           Memory top: 5 of 131
           1: mem: 19.9 MiB (0.2%) command: unattended-upgrade-shutdown started by: python3
           pid: 540 cpu: 0.1%
           2: mem: 19.8 MiB (0.2%) command: fail2ban-server started by: python3 pid: 536 cpu: 0.3%
           3: mem: 18.0 MiB (0.2%) command: packagekitd pid: 1087 cpu: 0.8%
           4: mem: 14.3 MiB (0.1%) command: systemd-journald pid: 143 cpu: 0.2%
           5: mem: 9.73 MiB (0.1%) command: init pid: 1 cpu: 1.4%
Info:      Processes: 131 Uptime: 2m Init: systemd v: 247 runlevel: 3 target: multi-user.target
           tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release
           inxi: 3.3.09

Benchmark #53344 - Brand: Samsung 980