Benchmark #53369 - pibenchmarks.com

Brand: Western Digital My Passport HDD
HDD (Portable)
#194 / 1,679
88
#731 / 1,679
#1 / 69
#0 / 24
5,801
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-12-02 11:51:39
#53,369
1,438
-4,363 (-303.41%)
Anonymous
wd passport 5tb

Storage Details
Western Digital My Passport HDD
HDD (Portable)
5000G
HDD
WDC
MyPassport2627
2.5 inch
SATA
5,400
3.10
5,000
1058:2627
0x1058
0x2627
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
N/A
4
1,500
360 (-140)
1,600

Operating System

Debian GNU/Linux 11 (bullseye)
aarch64

Benchmark Results
69.5 MB/s
83.01 MB/s
242.35 MB/s
257 IOPS
270 IOPS
1,030 KB/s
1,083 KB/s
23,999 KB/s
22,036 KB/s
3,683 KB/s
882 KB/s

inxi Results
System: Kernel: 5.10.0-9-arm64 aarch64 bits: 64 compiler: gcc v: 10.2.1 parameters: video=HDMI-A-1:3840x2160M@30,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 dma.dmachans=0x37f5 bcm2709.boardrev=0xc03114 bcm2709.serial=0xac53ddc1 bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=tty0 console=ttyS1,115200 root=/dev/sda2 rw fsck.mode=force fsck.repair=yes net.ifnames=0 rootwait Console: pty pts/0 Distro: Debian GNU/Linux 11 (bullseye) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: N/A Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.78 GiB used: 564.8 MiB (14.6%) gpu: 76 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1000 2: 1000 3: 1000 4: 1000 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: No display server data found. Headless machine? tty: 48x28 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Sound Server-1: ALSA v: k5.10.0-9-arm64 running: yes Network: Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic scope: global broadcast: IP v6: scope: link Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq IF-ID-1: wlan0 state: down mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: hardware: no software: no address: see --recommends Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial Report: This feature requires one of these tools: hciconfig/bt-adapter Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 4.55 TiB used: 5.89 GiB (0.1%) ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Western Digital model: WD My Passport 2627 drive model: WD50NDZW-11A8JS1 family: Elements / My Passport (USB, AF) size: 4.55 TiB block-size: physical: 4096 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s type: HDD rpm: 5400 rev: 4008 drive rev: 01.01A01 temp: 37 C scheme: GPT SMART: yes state: enabled health: PASSED on: 86d 11h cycles: 105 Message: No optical or floppy data found. Partition: ID-1: / raw-size: 4.55 TiB size: 4.48 TiB (98.41%) used: 5.76 GiB (0.1%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT uuid: 22f44f5f-57f0-4a57-8497-ddc6d7a82b22 ID-2: /boot/firmware raw-size: 296 MiB size: 295.8 MiB (99.94%) used: 127.7 MiB (43.2%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: RASPIFIRM uuid: 6545-1333 ID-3: /media/drive raw-size: N/A size: 1024 TiB used: 0 KiB (0.0%) fs: fuse.rclone remote: gc:/ Swap: Alert: No swap data was found. Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Device-1: 1-1.4:3 info: GreenAsia type: Keyboard,Mouse driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s power: 100mA chip-ID: 0e8f:2517 class-ID: 0301 Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-2:2 info: Western Digital My Passport 2627 type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.1 speed: 5 Gb/s power: 896mA chip-ID: 1058:2627 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 748 lib: 508 Active apt repos in: /etc/apt/sources.list 1: deb http: //deb.debian.org/debian bullseye main contrib non-free 2: deb http: //security.debian.org/debian-security bullseye-security main contrib non-free 3: deb http: //deb.debian.org/debian/ bullseye-backports main contrib non-free # raspi 4 needs a kernel and raspi-firmware newer than buster's Active apt repos in: /etc/apt/sources.list.d/mono-official-stable.list 1: deb https: //download.mono-project.com/repo/debian stable-buster main Active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list 1: deb https: //downloads.plex.tv/repo/deb public main Processes: CPU top: 5 of 123 1: cpu: 0.8% command: smartd pid: 3895 mem: 5.16 MiB (0.1%) 2: cpu: 0.4% command: [kworker/0:0-events_power_efficient] pid: 1390 mem: 0.00 MiB (0.0%) 3: cpu: 0.2% command: plex pid: 2360 mem: 57.4 MiB (1.5%) 4: cpu: 0.2% command: bash pid: 3054 mem: 3.29 MiB (0.0%) 5: cpu: 0.1% command: [irq/27-mmc1] pid: 146 mem: 0.00 MiB (0.0%) Memory top: 5 of 123 1: mem: 81.7 MiB (2.1%) command: rclone pid: 455 cpu: 0.0% 2: mem: 57.4 MiB (1.5%) command: plex pid: 2360 cpu: 0.2% 3: mem: 43.2 MiB (1.1%) command: plex pid: 2597 cpu: 0.0% 4: mem: 41.6 MiB (1.0%) command: plex pid: 2386 cpu: 0.1% 5: mem: 33.9 MiB (0.8%) command: plex pid: 2663 cpu: 0.0% Info: Processes: 123 Uptime: 18h 26m Init: systemd v: 247 runlevel: 5 tool: systemctl Compilers: gcc: N/A Client: shell wrapper v: 5.1.4-release inxi: 3.3.09

inxi Results

System:    Kernel: 5.10.0-9-arm64 aarch64 bits: 64 compiler: gcc v: 10.2.1
           parameters: video=HDMI-A-1:3840x2160M@30,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48
           dma.dmachans=0x37f5 bcm2709.boardrev=0xc03114 bcm2709.serial=0xac53ddc1
           bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000
           vc_mem.mem_size=0x3ff00000 console=tty0 console=ttyS1,115200 root=/dev/sda2 rw
           fsck.mode=force fsck.repair=yes net.ifnames=0 rootwait
           Console: pty pts/0 Distro: Debian GNU/Linux 11 (bullseye)
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: N/A Battery:   Message: No system battery data found. Is one present?
Memory:    RAM: total: 3.78 GiB used: 564.8 MiB (14.6%) gpu: 76 MiB
           RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots: ARM: No ARM data found for this feature.
CPU:       Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8
           model-id: 0 stepping: 3 bogomips: 432
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1000 2: 1000 3: 1000 4: 1000
           Features: asimd cpuid crc32 evtstrm fp
           Vulnerabilities: Type: itlb_multihit status: Not affected
           Type: l1tf status: Not affected
           Type: mds status: Not affected
           Type: meltdown status: Not affected
           Type: spec_store_bypass status: Vulnerable
           Type: spectre_v1 mitigation: __user pointer sanitization
           Type: spectre_v2 status: Vulnerable
           Type: srbds status: Not affected
           Type: tsx_async_abort status: Not affected
Graphics:  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700
           class-ID: hdmi
           Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700
           class-ID: hdmi
           Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu
           class-ID: gpu
           Display: server: No display server data found. Headless machine? tty: 48x28
           Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:     Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700
           class-ID: hdmi
           Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700
           class-ID: hdmi
           Sound Server-1: ALSA v: k5.10.0-9-arm64 running: yes
Network:   Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A
           chip-ID: brcm:fd580000 class-ID: ethernet
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 
           IP v4:  type: dynamic scope: global broadcast: 
           IP v6:  scope: link
           Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A
           chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq
           IF-ID-1: wlan0 state: down mac: 
           WAN IP: 
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
           Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block:
           hardware: no software: no address: see --recommends
           Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial
           Report: This feature requires one of these tools: hciconfig/bt-adapter
Logical:   Message: No logical block device data found.
RAID:      Message: No RAID data found.
Drives:    Local Storage: total: 4.55 TiB used: 5.89 GiB (0.1%)
           ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Western Digital
           model: WD My Passport 2627 drive model: WD50NDZW-11A8JS1
           family: Elements / My Passport (USB, AF) size: 4.55 TiB block-size: physical: 4096 B
           logical: 512 B sata: 3.1 speed: 6.0 Gb/s type: HDD rpm: 5400 rev: 4008 drive rev: 01.01A01 temp: 37 C scheme: GPT
           SMART: yes state: enabled health: PASSED on: 86d 11h cycles: 105
           Message: No optical or floppy data found.
Partition: ID-1: / raw-size: 4.55 TiB size: 4.48 TiB (98.41%) used: 5.76 GiB (0.1%) fs: ext4
           block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT
           uuid: 22f44f5f-57f0-4a57-8497-ddc6d7a82b22
           ID-2: /boot/firmware raw-size: 296 MiB size: 295.8 MiB (99.94%) used: 127.7 MiB (43.2%)
           fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: RASPIFIRM uuid: 6545-1333
           ID-3: /media/drive raw-size: N/A size: 1024 TiB used: 0 KiB (0.0%) fs: fuse.rclone
           remote: gc:/
Swap:      Alert: No swap data was found.
Unmounted: Message: No unmounted partitions found.
USB:       Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
           chip-ID: 1d6b:0002 class-ID: 0900
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA
           chip-ID: 2109:3431 class-ID: 0900
           Device-1: 1-1.4:3 info: GreenAsia type: Keyboard,Mouse driver: hid-generic,usbhid
           interfaces: 2 rev: 1.1 speed: 1.5 Mb/s power: 100mA chip-ID: 0e8f:2517 class-ID: 0301
           Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003
           class-ID: 0900
           Device-1: 2-2:2 info: Western Digital My Passport 2627 type: Mass Storage
           driver: usb-storage interfaces: 1 rev: 3.1 speed: 5 Gb/s power: 896mA
           chip-ID: 1058:2627 class-ID: 0806 Sensors:   Missing: Required tool sensors not installed. Check --recommends
Repos:     Packages: apt: 748 lib: 508
           Active apt repos in: /etc/apt/sources.list
           1: deb http: //deb.debian.org/debian bullseye main contrib non-free
           2: deb http: //security.debian.org/debian-security bullseye-security main contrib non-free
           3: deb http: //deb.debian.org/debian/ bullseye-backports main contrib non-free # raspi 4 needs a kernel and raspi-firmware newer than buster's
           Active apt repos in: /etc/apt/sources.list.d/mono-official-stable.list
           1: deb https: //download.mono-project.com/repo/debian stable-buster main
           Active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list
           1: deb https: //downloads.plex.tv/repo/deb public main
Processes: CPU top: 5 of 123
           1: cpu: 0.8% command: smartd pid: 3895 mem: 5.16 MiB (0.1%)
           2: cpu: 0.4% command: [kworker/0:0-events_power_efficient] pid: 1390
           mem: 0.00 MiB (0.0%)
           3: cpu: 0.2% command: plex pid: 2360 mem: 57.4 MiB (1.5%)
           4: cpu: 0.2% command: bash pid: 3054 mem: 3.29 MiB (0.0%)
           5: cpu: 0.1% command: [irq/27-mmc1] pid: 146 mem: 0.00 MiB (0.0%)
           Memory top: 5 of 123
           1: mem: 81.7 MiB (2.1%) command: rclone pid: 455 cpu: 0.0%
           2: mem: 57.4 MiB (1.5%) command: plex pid: 2360 cpu: 0.2%
           3: mem: 43.2 MiB (1.1%) command: plex pid: 2597 cpu: 0.0%
           4: mem: 41.6 MiB (1.0%) command: plex pid: 2386 cpu: 0.1%
           5: mem: 33.9 MiB (0.8%) command: plex pid: 2663 cpu: 0.0%
Info:      Processes: 123 Uptime: 18h 26m Init: systemd v: 247 runlevel: 5 tool: systemctl
           Compilers: gcc: N/A Client: shell wrapper v: 5.1.4-release inxi: 3.3.09

Benchmark #53369 - Brand: Western Digital My Passport HDD