Benchmark #53391 - pibenchmarks.com

Brand: Panasonic SD
C10 U1
#123 / 1,679
144
#1,363 / 1,679
#229 / 394
1,097
	Amazon.com Amazon.co.uk Amazon.com.au Amazon.de Amazon.es Amazon.it Amazon.nl

Overview
2021-12-03 01:36:40
#53,391
399
-698 (-174.94%)
Anonymous
Panasonic SD32G on Pi 3 A+

Secure Digital (SD) Card Details
Panasonic SD
C10 U1
28.6G
SD
Panasonic
SD32G
SDHC
3.00
0x01
PA
3.0
05/2017
Class 10
None
U1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3A+ 1.0
Raspberry Pi 3 Model A Plus Rev 1.0
Raspberry Pi Foundation
ARMv7 v7l
4
1,400
400
450
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
6.7 MB/s
20.42 MB/s
20.46 MB/s
72 IOPS
1,533 IOPS
288 KB/s
6,135 KB/s
6,277 KB/s
784 KB/s
4,140 KB/s
334 KB/s

inxi Results
perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LC_TERMINAL = "iTerm2", LC_CTYPE = "UTF-8", LANG = "en_GB.UTF-8" are supported and installed on your system. perl: warning: Falling back to a fallback locale ("en_GB.UTF-8"). System: Kernel: 5.10.63-v7+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 console=ttyS0,115200 console=tty1 root=PARTUUID=31a33021-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: pty pts/0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 3 Model A Plus Rev 1.0 details: BCM2835 rev: 9020e0 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 492.5 MiB used: 304.5 MiB (61.8%) gpu: 128 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 4 bogomips: 358 Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 4: 1400 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc class-ID: fb Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: No display server data found. Headless machine? tty: 244x91 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.63-v7+ running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:3f300000 class-ID: mmcnr IF: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic noprefixroute scope: global IP v6: scope: link IF-ID-1: docker0 state: down mac: IP v4: scope: global broadcast: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:3f201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 28.83 GiB used: 6.59 GiB (22.9%) ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: SanDisk model: SD32G size: 28.83 GiB block-size: physical: 512 B logical: 512 B type: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. Message: No optical or floppy data found. Partition: ID-1: / raw-size: 28.57 GiB size: 28.1 GiB (98.34%) used: 6.55 GiB (23.3%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs uuid: b3ce35cd-ade9-4755-a4bb-1571e37fc1b9 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 49.1 MiB (19.5%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: EBBA-157F Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 1024 MiB used: 89.8 MiB (8.8%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 100mA chip-ID: 1a40:0101 class-ID: 0900 Device-1: 1-1.1:3 info: Canon PIXMA MG2500 Series type: Printer driver: usblp interfaces: 2 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 04a9:176d class-ID: 0701 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 858 lib: 525 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 140 1: cpu: 6.0% command: [kworker/u8:1-brcmf_wq/mmc1:0001:1] pid: 26779 mem: 0.00 MiB (0.0%) 2: cpu: 1.0% command: octoprint started by: python3 pid: 343 mem: 35.7 MiB (9.7%) 3: cpu: 0.9% command: init pid: 1 mem: 5.95 MiB (1.6%) 4: cpu: 0.5% command: systemd-journald pid: 129 mem: 4.41 MiB (1.2%) 5: cpu: 0.3% command: dbus-daemon pid: 354 mem: 2.30 MiB (0.6%) Memory top: 5 of 140 1: mem: 35.7 MiB (9.7%) command: octoprint started by: python3 pid: 343 cpu: 1.0% 2: mem: 11.1 MiB (3.0%) command: dockerd pid: 806 cpu: 0.1% 3: mem: 6.39 MiB (1.7%) command: containerd pid: 743 cpu: 0.0% 4: mem: 5.95 MiB (1.6%) command: init pid: 1 cpu: 0.9% 5: mem: 4.62 MiB (1.2%) command: cups-browsed pid: 4649 cpu: 0.0% Info: Processes: 140 Uptime: 15h 37m Init: systemd v: 241 runlevel: 5 tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.09

inxi Results

perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
	LANGUAGE = (unset),
	LC_ALL = (unset),
	LC_TERMINAL = "iTerm2",
	LC_CTYPE = "UTF-8",
	LANG = "en_GB.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_GB.UTF-8").
System:    Kernel: 5.10.63-v7+ armv7l bits: 32 compiler: N/A
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0
           snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416
           bcm2708_fb.fbswap=1 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000
           console=ttyS0,115200 console=tty1 root=PARTUUID=31a33021-02 rootfstype=ext4
           elevator=deadline fsck.repair=yes rootwait
           Console: pty pts/0 Distro: Raspbian GNU/Linux 10 (buster)
Machine:   Type: ARM Device System: Raspberry Pi 3 Model A Plus Rev 1.0 details: BCM2835
           rev: 9020e0 Battery:   Message: No system battery data found. Is one present?
Memory:    RAM: total: 492.5 MiB used: 304.5 MiB (61.8%) gpu: 128 MiB
           RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots: ARM: No ARM data found for this feature.
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l
           family: 7 model-id: 0 stepping: 4 bogomips: 358
           Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400
           4: 1400
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32
           vfpv3 vfpv4
           Vulnerabilities: No CPU vulnerability/bugs data available.
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc
           class-ID: fb
           Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Display: server: No display server data found. Headless machine? tty: 244x91
           Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio
           class-ID: bcm2835_audio
           Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Sound Server-1: ALSA v: k5.10.63-v7+ running: yes
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A
           chip-ID: brcm:3f300000 class-ID: mmcnr
           IF: wlan0 state: up mac: 
           IP v4:  type: dynamic noprefixroute scope: global broadcast: 
           IP v6:  type: dynamic noprefixroute scope: global
           IP v6:  scope: link
           IF-ID-1: docker0 state: down mac: 
           IP v4:  scope: global broadcast: 
           WAN IP: 
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:3f201000 class-ID: serial
           Report: hciconfig ID: hci0 rfk-id: 1 state: up address:  bt-v: 3.0 lmp-v: 5.0
           sub-v: 6119 hci-v: 5.0 rev: 156
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept
Logical:   Message: No logical block device data found.
RAID:      Message: No RAID data found.
Drives:    Local Storage: total: 28.83 GiB used: 6.59 GiB (22.9%)
           ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: SanDisk model: SD32G size: 28.83 GiB
           block-size: physical: 512 B logical: 512 B type: SSD scheme: MBR
           SMART Message: Unknown smartctl error. Unable to generate data.
           Message: No optical or floppy data found.
Partition: ID-1: / raw-size: 28.57 GiB size: 28.1 GiB (98.34%) used: 6.55 GiB (23.3%) fs: ext4
           block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs
           uuid: b3ce35cd-ade9-4755-a4bb-1571e37fc1b9
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 49.1 MiB (19.5%) fs: vfat
           block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: EBBA-157F
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
           ID-1: swap-1 type: file size: 1024 MiB used: 89.8 MiB (8.8%) priority: -2
           file: /var/swap
Unmounted: Message: No unmounted partitions found.
USB:       Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
           chip-ID: 1d6b:0002 class-ID: 0900
           Hub-2: 1-1:2 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 100mA
           chip-ID: 1a40:0101 class-ID: 0900
           Device-1: 1-1.1:3 info: Canon PIXMA MG2500 Series type: Printer driver: usblp
           interfaces: 2 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 04a9:176d class-ID: 0701
           Sensors:   Missing: Required tool sensors not installed. Check --recommends
Repos:     Packages: apt: 858 lib: 525
           Active apt repos in: /etc/apt/sources.list
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list
           1: deb [arch=armhf signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           No active apt repos in: /etc/apt/sources.list.d/vscode.list
Processes: CPU top: 5 of 140
           1: cpu: 6.0% command: [kworker/u8:1-brcmf_wq/mmc1:0001:1] pid: 26779
           mem: 0.00 MiB (0.0%)
           2: cpu: 1.0% command: octoprint started by: python3 pid: 343 mem: 35.7 MiB (9.7%)
           3: cpu: 0.9% command: init pid: 1 mem: 5.95 MiB (1.6%)
           4: cpu: 0.5% command: systemd-journald pid: 129 mem: 4.41 MiB (1.2%)
           5: cpu: 0.3% command: dbus-daemon pid: 354 mem: 2.30 MiB (0.6%)
           Memory top: 5 of 140
           1: mem: 35.7 MiB (9.7%) command: octoprint started by: python3 pid: 343 cpu: 1.0%
           2: mem: 11.1 MiB (3.0%) command: dockerd pid: 806 cpu: 0.1%
           3: mem: 6.39 MiB (1.7%) command: containerd pid: 743 cpu: 0.0%
           4: mem: 5.95 MiB (1.6%) command: init pid: 1 cpu: 0.9%
           5: mem: 4.62 MiB (1.2%) command: cups-browsed pid: 4649 cpu: 0.0%
Info:      Processes: 140 Uptime: 15h 37m Init: systemd v: 241 runlevel: 5 tool: systemctl
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.09

Benchmark #53391 - Brand: Panasonic SD