Benchmark #53397 - pibenchmarks.com

Brand: SanDisk SD Extreme A2 (SN64G)
A2 C10 V30 U3
#16 / 1,700
796
#1,184 / 1,700
#87 / 404
1,576
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-12-03 03:46:58
#53,397
1,164
-412 (-35.40%)
Anonymous
sandisk extrem sd 64GB

Secure Digital (SD) Card Details
SanDisk SD Extreme A2 (SN64G)
A2 C10 V30 U3
59.2G
SD
SanDisk
SN64G
SDXC
6.00
0x03
SD
8.0
10/2021
Class 10
A2
U3
V30

System Board Details
		Amazon.com AliExpress
Raspberry Pi Compute Module 4 1.0
Raspberry Pi Compute Module 4 Rev 1.0
Raspberry Pi Foundation
N/A
4
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
aarch64

Benchmark Results
19.7 MB/s
22.37 MB/s
22.59 MB/s
944 IOPS
2,471 IOPS
3,779 KB/s
9,885 KB/s
7,994 KB/s
2,379 KB/s
6,917 KB/s
3,967 KB/s

inxi Results
System: Kernel: 5.10.63-v8+ aarch64 bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyAMA0,115200 console=tty1 root=PARTUUID=20310eef-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: pty pts/0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi Compute Module 4 Rev 1.0 details: BCM2835 rev: c03140 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.78 GiB used: 302.8 MiB (7.8%) gpu: 76 MiB RAM Report: no-data: dmidecode is not allowed to read /dev/mem PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 bogomips: 432 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: X.org 1.20.4 driver: loaded: modesetting unloaded: fbdev tty: 176x40 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.63-v8+ running: yes Sound Server-2: PulseAudio v: 12.2 running: no Network: Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link Device-2: bcm2835-sdhci driver: N/A port: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: mmcnr WAN IP: Bluetooth: Message: No bluetooth data found. Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 59.48 GiB used: 4.97 GiB (8.3%) ID-1: /dev/mmcblk0 maj-min: 179:0 model: SN64G size: 59.48 GiB block-size: physical: 512 B logical: 512 B type: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. Message: No optical or floppy data found. Partition: ID-1: / raw-size: 59.22 GiB size: 58.24 GiB (98.34%) used: 4.92 GiB (8.4%) fs: ext4 block-size: 512 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs uuid: 87b585d1-84c3-486a-8f3d-77cf16f84f30 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.9 MiB (19.4%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: 7616-4FD8 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 100mA chip-ID: 1a40:0101 class-ID: 0900 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 1627 lib: 880 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 130 1: cpu: 5.0% command: mono pid: 359 mem: 32.4 MiB (0.8%) 2: cpu: 0.6% command: java pid: 403 mem: 41.9 MiB (1.1%) 3: cpu: 0.4% command: init pid: 1 mem: 8.05 MiB (0.2%) 4: cpu: 0.1% command: [kworker/u8:0-events_unbound] pid: 715 mem: 0.00 MiB (0.0%) 5: cpu: 0.1% command: bash pid: 2849 mem: 2.79 MiB (0.0%) Memory top: 5 of 130 1: mem: 41.9 MiB (1.1%) command: java pid: 403 cpu: 0.6% 2: mem: 32.4 MiB (0.8%) command: mono pid: 359 cpu: 5.0% 3: mem: 13.1 MiB (0.3%) command: packagekitd pid: 873 cpu: 0.0% 4: mem: 11.6 MiB (0.3%) command: colord pid: 559 cpu: 0.0% 5: mem: 10.3 MiB (0.2%) command: cups-browsed pid: 596 cpu: 0.0% Info: Processes: 130 Uptime: 22m Init: systemd v: 241 runlevel: 3 target: multi-user.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.09

inxi Results

System:    Kernel: 5.10.63-v8+ aarch64 bits: 32 compiler: N/A
           parameters: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0
           snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000
           vc_mem.mem_size=0x40000000 console=ttyAMA0,115200 console=tty1
           root=PARTUUID=20310eef-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
           quiet splash plymouth.ignore-serial-consoles
           Console: pty pts/0 Distro: Raspbian GNU/Linux 10 (buster)
Machine:   Type: ARM Device System: Raspberry Pi Compute Module 4 Rev 1.0 details: BCM2835
           rev: c03140 Battery:   Message: No system battery data found. Is one present?
Memory:    RAM: total: 3.78 GiB used: 302.8 MiB (7.8%) gpu: 76 MiB
           RAM Report: no-data: dmidecode is not allowed to read /dev/mem
PCI Slots: ARM: No ARM data found for this feature.
CPU:       Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8
           model-id: 0 stepping: 3 bogomips: 432
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500
           4: 1500
           Features: asimd cpuid crc32 evtstrm fp
           Vulnerabilities: Type: itlb_multihit status: Not affected
           Type: l1tf status: Not affected
           Type: mds status: Not affected
           Type: meltdown status: Not affected
           Type: spec_store_bypass status: Vulnerable
           Type: spectre_v1 mitigation: __user pointer sanitization
           Type: spectre_v2 status: Vulnerable
           Type: srbds status: Not affected
           Type: tsx_async_abort status: Not affected
Graphics:  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu
           class-ID: gpu
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Display: server: X.org 1.20.4 driver: loaded: modesetting unloaded: fbdev tty: 176x40
           Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio
           class-ID: bcm2835_audio
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Sound Server-1: ALSA v: k5.10.63-v8+ running: yes
           Sound Server-2: PulseAudio v: 12.2 running: no
Network:   Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A
           chip-ID: brcm:fd580000 class-ID: ethernet
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 
           IP v4:  type: dynamic noprefixroute scope: global broadcast: 
           IP v6:  scope: link
           Device-2: bcm2835-sdhci driver: N/A port: N/A bus-ID: N/A chip-ID: brcm:soc
           class-ID: mmcnr
           WAN IP: 
Bluetooth: Message: No bluetooth data found.
Logical:   Message: No logical block device data found.
RAID:      Message: No RAID data found.
Drives:    Local Storage: total: 59.48 GiB used: 4.97 GiB (8.3%)
           ID-1: /dev/mmcblk0 maj-min: 179:0 model: SN64G size: 59.48 GiB block-size:
           physical: 512 B logical: 512 B type: SSD scheme: MBR
           SMART Message: Unknown smartctl error. Unable to generate data.
           Message: No optical or floppy data found.
Partition: ID-1: / raw-size: 59.22 GiB size: 58.24 GiB (98.34%) used: 4.92 GiB (8.4%) fs: ext4
           block-size: 512 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs
           uuid: 87b585d1-84c3-486a-8f3d-77cf16f84f30
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.9 MiB (19.4%) fs: vfat
           block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: 7616-4FD8
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
           ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap
Unmounted: Message: No unmounted partitions found.
USB:       Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
           chip-ID: 1d6b:0002 class-ID: 0900
           Hub-2: 1-1:2 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 100mA
           chip-ID: 1a40:0101 class-ID: 0900
Sensors:   Missing: Required tool sensors not installed. Check --recommends
Repos:     Packages: apt: 1627 lib: 880
           Active apt repos in: /etc/apt/sources.list
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           No active apt repos in: /etc/apt/sources.list.d/vscode.list
Processes: CPU top: 5 of 130
           1: cpu: 5.0% command: mono pid: 359 mem: 32.4 MiB (0.8%)
           2: cpu: 0.6% command: java pid: 403 mem: 41.9 MiB (1.1%)
           3: cpu: 0.4% command: init pid: 1 mem: 8.05 MiB (0.2%)
           4: cpu: 0.1% command: [kworker/u8:0-events_unbound] pid: 715 mem: 0.00 MiB (0.0%)
           5: cpu: 0.1% command: bash pid: 2849 mem: 2.79 MiB (0.0%)
           Memory top: 5 of 130
           1: mem: 41.9 MiB (1.1%) command: java pid: 403 cpu: 0.6%
           2: mem: 32.4 MiB (0.8%) command: mono pid: 359 cpu: 5.0%
           3: mem: 13.1 MiB (0.3%) command: packagekitd pid: 873 cpu: 0.0%
           4: mem: 11.6 MiB (0.3%) command: colord pid: 559 cpu: 0.0%
           5: mem: 10.3 MiB (0.2%) command: cups-browsed pid: 596 cpu: 0.0%
Info:      Processes: 130 Uptime: 22m Init: systemd v: 241 runlevel: 3 target: multi-user.target
           tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release
           inxi: 3.3.09

Benchmark #53397 - Brand: SanDisk SD Extreme A2 (SN64G)