Benchmark #53669 - pibenchmarks.com

Brand: Silicon Power eMMC (SPeMM)
MMC (Embedded)
#600 / 1,665
11
#884 / 1,665
#30 / 75
#30 / 92
4,638

Overview
2021-12-08 02:17:23
#53,669
2,075
-2,563 (-123.52%)
EricV
Pi 3B+ 32GB eMMC on SD adapter

Storage Details
Silicon Power eMMC (SPeMM)
MMC (Embedded)
28.7G
MMC
SP
SPeMM
Embedded
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B 1.2
Raspberry Pi 3 Model B Rev 1.2
Raspberry Pi Foundation
ARMv7 v7l
4
1,200
400
450

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
20.9 MB/s
21.66 MB/s
21.45 MB/s
3,073 IOPS
3,255 IOPS
12,292 KB/s
13,021 KB/s
9,643 KB/s
8,743 KB/s
8,180 KB/s
9,219 KB/s

inxi Results
System: Kernel: 5.10.17-v7+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=800 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=7cf633a8-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 1 DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 1000.2 MiB used: 279.8 MiB (28.0%) gpu: 76 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 4 bogomips: 307 Speed: 1200 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200 4: 1200 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc class-ID: fb Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: X.org 1.20.4 driver: loaded: fbturbo tty: 100x30 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.17-v7+ running: yes Sound Server-2: PulseAudio v: 12.2 running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:3f300000 class-ID: mmcnr IF: wlan0 state: down mac: Device-2: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus-ID: 1-1.1:3 chip-ID: 0424:ec00 class-ID: ff00 IF: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:3f201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: bt-v: 2.1 lmp-v: 4.1 sub-v: 2209 hci-v: 4.1 rev: 1fc Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept service-classes: rendering, capturing Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 28.97 GiB used: 3.14 GiB (10.9%) ID-1: /dev/mmcblk0 maj-min: 179:0 model: SPeMMC size: 28.97 GiB block-size: physical: 512 B logical: 512 B type: SSD rev: 0x8 scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. Message: No optical or floppy data found. Partition: ID-1: / raw-size: 28.71 GiB size: 28.21 GiB (98.23%) used: 3.1 GiB (11.0%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs uuid: 87b585d1-84c3-486a-8f3d-77cf16f84f30 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.1 MiB (19.1%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: 7616-4FD8 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 7.8 MiB (7.8%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 0424:9514 class-ID: 0900 Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 0424:ec00 class-ID: ff00 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 1416 lib: 707 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 148 1: cpu: 3.0% command: systemd pid: 1 mem: 8.19 MiB (0.8%) 2: cpu: 0.7% command: [kworker/2:2-mm_percpu_wq] pid: 86 mem: 0.00 MiB (0.0%) 3: cpu: 0.6% command: dbus-daemon pid: 367 mem: 2.88 MiB (0.3%) 4: cpu: 0.5% command: [kworker/0:0h-mmc_complete] pid: 2769 mem: 0.00 MiB (0.0%) 5: cpu: 0.4% command: [kworker/0:1-events] pid: 32 mem: 0.00 MiB (0.0%) Memory top: 5 of 148 1: mem: 23.1 MiB (2.4%) command: xorg pid: 507 cpu: 0.2% 2: mem: 19.3 MiB (2.0%) command: applet.py started by: python3 pid: 822 cpu: 0.2% 3: mem: 18.9 MiB (2.0%) command: lxpanel pid: 793 cpu: 0.4% 4: mem: 18.7 MiB (2.0%) command: pcmanfm pid: 794 cpu: 0.4% 5: mem: 13.3 MiB (1.4%) command: packagekitd pid: 9564 cpu: 0.1% Info: Processes: 148 Uptime: 14m Init: systemd v: 241 runlevel: 5 target: graphical.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.09

inxi Results

System:    Kernel: 5.10.17-v7+ armv7l bits: 32 compiler: N/A
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0
           snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=800 bcm2708_fb.fbheight=480
           bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000
           console=ttyS0,115200 console=tty1 root=PARTUUID=7cf633a8-02 rootfstype=ext4
           elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
           Console: tty 1 DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster)
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082
           Battery:   Message: No system battery data found. Is one present?
Memory:    RAM: total: 1000.2 MiB used: 279.8 MiB (28.0%) gpu: 76 MiB
           RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots: ARM: No ARM data found for this feature.
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l
           family: 7 model-id: 0 stepping: 4 bogomips: 307
           Speed: 1200 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200
           4: 1200
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32
           vfpv3 vfpv4
           Vulnerabilities: No CPU vulnerability/bugs data available.
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc
           class-ID: fb
           Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Display: server: X.org 1.20.4 driver: loaded: fbturbo tty: 100x30
           Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio
           class-ID: bcm2835_audio
           Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Sound Server-1: ALSA v: k5.10.17-v7+ running: yes
           Sound Server-2: PulseAudio v: 12.2 running: yes
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A
           chip-ID: brcm:3f300000 class-ID: mmcnr
           IF: wlan0 state: down mac: 
           Device-2: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB
           driver: smsc95xx bus-ID: 1-1.1:3 chip-ID: 0424:ec00 class-ID: ff00
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: 
           IP v4:  type: dynamic noprefixroute scope: global broadcast: 
           IP v6:  scope: link
           WAN IP: 
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:3f201000 class-ID: serial
           Report: hciconfig ID: hci0 rfk-id: 1 state: up address:  bt-v: 2.1 lmp-v: 4.1
           sub-v: 2209 hci-v: 4.1 rev: 1fc
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept
           service-classes: rendering, capturing
Logical:   Message: No logical block device data found.
RAID:      Message: No RAID data found.
Drives:    Local Storage: total: 28.97 GiB used: 3.14 GiB (10.9%)
           ID-1: /dev/mmcblk0 maj-min: 179:0 model: SPeMMC size: 28.97 GiB block-size:
           physical: 512 B logical: 512 B type: SSD rev: 0x8 scheme: MBR
           SMART Message: Unknown smartctl error. Unable to generate data.
           Message: No optical or floppy data found.
Partition: ID-1: / raw-size: 28.71 GiB size: 28.21 GiB (98.23%) used: 3.1 GiB (11.0%) fs: ext4
           block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs
           uuid: 87b585d1-84c3-486a-8f3d-77cf16f84f30
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.1 MiB (19.1%) fs: vfat
           block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: 7616-4FD8
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
           ID-1: swap-1 type: file size: 100 MiB used: 7.8 MiB (7.8%) priority: -2 file: /var/swap
Unmounted: Message: No unmounted partitions found.
USB:       Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
           chip-ID: 1d6b:0002 class-ID: 0900
           Hub-2: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s
           power: 2mA chip-ID: 0424:9514 class-ID: 0900
           Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter
           type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 2mA
           chip-ID: 0424:ec00 class-ID: ff00
Sensors:   Missing: Required tool sensors not installed. Check --recommends
Repos:     Packages: apt: 1416 lib: 707
           Active apt repos in: /etc/apt/sources.list
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           No active apt repos in: /etc/apt/sources.list.d/vscode.list
Processes: CPU top: 5 of 148
           1: cpu: 3.0% command: systemd pid: 1 mem: 8.19 MiB (0.8%)
           2: cpu: 0.7% command: [kworker/2:2-mm_percpu_wq] pid: 86 mem: 0.00 MiB (0.0%)
           3: cpu: 0.6% command: dbus-daemon pid: 367 mem: 2.88 MiB (0.3%)
           4: cpu: 0.5% command: [kworker/0:0h-mmc_complete] pid: 2769 mem: 0.00 MiB (0.0%)
           5: cpu: 0.4% command: [kworker/0:1-events] pid: 32 mem: 0.00 MiB (0.0%)
           Memory top: 5 of 148
           1: mem: 23.1 MiB (2.4%) command: xorg pid: 507 cpu: 0.2%
           2: mem: 19.3 MiB (2.0%) command: applet.py started by: python3 pid: 822 cpu: 0.2%
           3: mem: 18.9 MiB (2.0%) command: lxpanel pid: 793 cpu: 0.4%
           4: mem: 18.7 MiB (2.0%) command: pcmanfm pid: 794 cpu: 0.4%
           5: mem: 13.3 MiB (1.4%) command: packagekitd pid: 9564 cpu: 0.1%
Info:      Processes: 148 Uptime: 14m Init: systemd v: 241 runlevel: 5 target: graphical.target
           tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release
           inxi: 3.3.09

Benchmark #53669 - Brand: Silicon Power eMMC (SPeMM)