Benchmark #53714 - pibenchmarks.com

Brand: Toshiba Canvio 2.5" MK Series
HDD (2.5" SATA)
#224 / 1,679
72
#1,430 / 1,679
#61 / 69
#18 / 20
976
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-12-09 12:34:10
#53,714
523
-453 (-86.62%)
Anonymous
test1

Storage Details
Toshiba Canvio 2.5" MK Series
HDD (2.5" SATA)
250G
HDD
Toshiba
MK2565GSX
2.5 inch
SATA
5,400
2.10
480
2109:a73a
0x2109
0xa73a
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
ARMv7 v7l
4
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
22.7 MB/s
27.7 MB/s
28.44 MB/s
216 IOPS
136 IOPS
866 KB/s
547 KB/s
9,082 KB/s
8,774 KB/s
504 KB/s
722 KB/s

inxi Results
System: Kernel: 5.10.63-v7l+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=792283d6-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: Openbox 3.6.1 info: lxpanel dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2711 rev: c03112 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.82 GiB used: 1002.2 MiB (25.6%) gpu: 252 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 3 bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: X.Org 1.20.4 compositor: xcompmgr driver: loaded: modesetting unloaded: fbdev display-ID: :0.0 screens: 1 Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 507x285mm (20.0x11.2") s-diag: 582mm (22.9") Monitor-1: HDMI-1 res: 1920x1080 hz: 60 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.63-v7l+ running: yes Sound Server-2: JACK v: 1.9.12 running: no Sound Server-3: PulseAudio v: 12.2 running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: down mac: IF-ID-1: br-c6141d991d46 state: down mac: IP v4: scope: global broadcast: IF-ID-2: docker0 state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-3: veth5be942c state: up speed: 10000 Mbps duplex: full mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept service-classes: capturing, telephony Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 698.65 GiB used: 103.86 GiB (14.9%) ID-1: /dev/sda maj-min: 8:0 type: USB vendor: A-Data model: XPG EX500 size: 232.89 GiB block-size: physical: 4096 B logical: 512 B type: N/A rev: 9301 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: JMicron Tech model: USB to ATA ATAPI bridge drive vendor: Seagate drive model: ST500DM002-1BD142 family: Barracuda 7200.14 (AF) size: 465.76 GiB block-size: physical: 4096 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s type: HDD rpm: 7200 rev: 2022 drive rev: KC44 temp: 37 C scheme: MBR SMART: yes state: enabled health: PASSED on: 2y 189d 13h cycles: 3196 read: 1.47 TiB written: 920.6 GiB Pre-Fail: attribute: Spin_Retry_Count value: 100 worst: 100 threshold: 97 Message: No optical or floppy data found. Partition: ID-1: / raw-size: 232.63 GiB size: 227.98 GiB (98.00%) used: 18.65 GiB (8.2%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: 05c2c54d-f13e-4442-bf69-70e99c3d748d ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.1 MiB (19.1%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 997C-A34A ID-3: /home//PiShare/Hdd3 raw-size: 465.76 GiB size: 457.45 GiB (98.22%) used: 85.17 GiB (18.6%) fs: ext4 block-size: 4096 B dev: /dev/sdb1 maj-min: 8:17 label: Hdd3 uuid: 8fd5bece-008d-4120-a765-ccbc7c46c6e8 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 18.1 MiB (18.1%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 1-1.1:3 info: Realtek ports: 4 rev: 2.1 speed: 480 Mb/s chip-ID: 0bda:5411 class-ID: 0900 Device-1: 1-1.2:4 info: A-DATA type: Mass Storage driver: uas interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 500mA chip-ID: 125f:a73a class-ID: 0806 Hub-4: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Hub-5: 2-1:2 info: Realtek ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 0bda:0411 class-ID: 0900 Device-1: 2-1.2:3 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 8mA chip-ID: 152d:0567 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 2117 lib: 965 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 229 1: cpu: 7.6% command: [w1_bus_master1] pid: 206 mem: 0.00 MiB (0.0%) 2: cpu: 6.8% command: anydesk pid: 15424 mem: 72.3 MiB (1.9%) 3: cpu: 4.4% command: [kworker/u8:1-events_unbound] pid: 14198 mem: 0.00 MiB (0.0%) 4: cpu: 2.6% command: [kworker/u8:3-events_unbound] pid: 15387 mem: 0.00 MiB (0.0%) 5: cpu: 2.6% command: lxterminal pid: 17605 mem: 26.8 MiB (0.7%) Memory top: 5 of 229 1: mem: 164.4 MiB (4.4%) command: python3 pid: 4211 cpu: 1.6% 2: mem: 98.5 MiB (2.6%) command: xorg pid: 655 cpu: 0.5% 3: mem: 72.3 MiB (1.9%) command: anydesk pid: 15424 cpu: 6.8% 4: mem: 67.4 MiB (1.8%) command: node-red pid: 425 cpu: 0.1% 5: mem: 51.0 MiB (1.3%) command: dockerd pid: 805 cpu: 0.2% Info: Processes: 229 Uptime: 6h 28m Init: systemd v: 241 runlevel: 5 target: graphical.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.09

inxi Results

System:    Kernel: 5.10.63-v7l+ armv7l bits: 32 compiler: N/A
           parameters: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0
           snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000
           vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=792283d6-02
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash
           plymouth.ignore-serial-consoles
           Desktop: Openbox 3.6.1 info: lxpanel dm: LightDM 1.26.0
           Distro: Raspbian GNU/Linux 10 (buster)
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2711 rev: c03112
           Battery:   Message: No system battery data found. Is one present?
Memory:    RAM: total: 3.82 GiB used: 1002.2 MiB (25.6%) gpu: 252 MiB
           RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots: ARM: No ARM data found for this feature.
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l
           family: 7 model-id: 0 stepping: 3 bogomips: 1080
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500
           4: 1500
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32
           vfpv3 vfpv4
           Vulnerabilities: No CPU vulnerability/bugs data available.
Graphics:  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu
           class-ID: gpu
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Display: server: X.Org 1.20.4 compositor: xcompmgr driver: loaded: modesetting
           unloaded: fbdev display-ID: :0.0 screens: 1
           Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 507x285mm (20.0x11.2")
           s-diag: 582mm (22.9")
           Monitor-1: HDMI-1 res: 1920x1080 hz: 60
           Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio
           class-ID: bcm2835_audio
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Sound Server-1: ALSA v: k5.10.63-v7l+ running: yes
           Sound Server-2: JACK v: 1.9.12 running: no
           Sound Server-3: PulseAudio v: 12.2 running: yes
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A
           chip-ID: brcm:fe300000 class-ID: mmcnr
           IF: wlan0 state: up mac: 
           IP v4:  type: dynamic noprefixroute scope: global broadcast: 
           IP v6:  scope: link
           Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A
           chip-ID: brcm:fd580000 class-ID: ethernet
           IF: eth0 state: down mac: 
           IF-ID-1: br-c6141d991d46 state: down mac: 
           IP v4:  scope: global broadcast: 
           IF-ID-2: docker0 state: up speed: 10000 Mbps duplex: unknown mac: 
           IP v4:  scope: global broadcast: 
           IP v6:  scope: link
           IF-ID-3: veth5be942c state: up speed: 10000 Mbps duplex: full mac: 
           WAN IP: 
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
           Report: hciconfig ID: hci0 rfk-id: 1 state: up address:  bt-v: 3.0 lmp-v: 5.0
           sub-v: 6119 hci-v: 5.0 rev: 156
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept
           service-classes: capturing, telephony
Logical:   Message: No logical block device data found.
RAID:      Message: No RAID data found.
Drives:    Local Storage: total: 698.65 GiB used: 103.86 GiB (14.9%)
           ID-1: /dev/sda maj-min: 8:0 type: USB vendor: A-Data model: XPG EX500 size: 232.89 GiB
           block-size: physical: 4096 B logical: 512 B type: N/A rev: 9301
           scheme: MBR
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
           ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: JMicron Tech
           model: USB to ATA ATAPI bridge drive vendor: Seagate drive model: ST500DM002-1BD142
           family: Barracuda 7200.14 (AF) size: 465.76 GiB block-size: physical: 4096 B
           logical: 512 B sata: 3.0 speed: 6.0 Gb/s type: HDD rpm: 7200 rev: 2022 drive rev: KC44 temp: 37 C scheme: MBR
           SMART: yes state: enabled health: PASSED on: 2y 189d 13h cycles: 3196 read: 1.47 TiB
           written: 920.6 GiB Pre-Fail: attribute: Spin_Retry_Count value: 100 worst: 100
           threshold: 97
           Message: No optical or floppy data found.
Partition: ID-1: / raw-size: 232.63 GiB size: 227.98 GiB (98.00%) used: 18.65 GiB (8.2%) fs: ext4
           block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs
           uuid: 05c2c54d-f13e-4442-bf69-70e99c3d748d
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.1 MiB (19.1%) fs: vfat
           block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 997C-A34A
           ID-3: /home//PiShare/Hdd3 raw-size: 465.76 GiB size: 457.45 GiB (98.22%)
           used: 85.17 GiB (18.6%) fs: ext4 block-size: 4096 B dev: /dev/sdb1 maj-min: 8:17
           label: Hdd3 uuid: 8fd5bece-008d-4120-a765-ccbc7c46c6e8
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
           ID-1: swap-1 type: file size: 100 MiB used: 18.1 MiB (18.1%) priority: -2
           file: /var/swap
Unmounted: Message: No unmounted partitions found.
USB:       Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
           chip-ID: 1d6b:0002 class-ID: 0900
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA
           chip-ID: 2109:3431 class-ID: 0900
           Hub-3: 1-1.1:3 info: Realtek ports: 4 rev: 2.1 speed: 480 Mb/s chip-ID: 0bda:5411
           class-ID: 0900
           Device-1: 1-1.2:4 info: A-DATA type: Mass Storage driver: uas interfaces: 1 rev: 2.1
           speed: 480 Mb/s power: 500mA chip-ID: 125f:a73a class-ID: 0806 Hub-4: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003
           class-ID: 0900
           Hub-5: 2-1:2 info: Realtek ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 0bda:0411
           class-ID: 0900
           Device-1: 2-1.2:3 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge
           type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 8mA
           chip-ID: 152d:0567 class-ID: 0806 Sensors:   Missing: Required tool sensors not installed. Check --recommends
Repos:     Packages: apt: 2117 lib: 965
           Active apt repos in: /etc/apt/sources.list
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           No active apt repos in: /etc/apt/sources.list.d/vscode.list
Processes: CPU top: 5 of 229
           1: cpu: 7.6% command: [w1_bus_master1] pid: 206 mem: 0.00 MiB (0.0%)
           2: cpu: 6.8% command: anydesk pid: 15424 mem: 72.3 MiB (1.9%)
           3: cpu: 4.4% command: [kworker/u8:1-events_unbound] pid: 14198 mem: 0.00 MiB (0.0%)
           4: cpu: 2.6% command: [kworker/u8:3-events_unbound] pid: 15387 mem: 0.00 MiB (0.0%)
           5: cpu: 2.6% command: lxterminal pid: 17605 mem: 26.8 MiB (0.7%)
           Memory top: 5 of 229
           1: mem: 164.4 MiB (4.4%) command: python3 pid: 4211 cpu: 1.6%
           2: mem: 98.5 MiB (2.6%) command: xorg pid: 655 cpu: 0.5%
           3: mem: 72.3 MiB (1.9%) command: anydesk pid: 15424 cpu: 6.8%
           4: mem: 67.4 MiB (1.8%) command: node-red pid: 425 cpu: 0.1%
           5: mem: 51.0 MiB (1.3%) command: dockerd pid: 805 cpu: 0.2%
Info:      Processes: 229 Uptime: 6h 28m Init: systemd v: 241 runlevel: 5 target: graphical.target
           tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release
           inxi: 3.3.09

Benchmark #53714 - Brand: Toshiba Canvio 2.5" MK Series