Benchmark #53974 - pibenchmarks.com

Brand: SanDisk Ultra II
SSD (2.5" SATA)
#139 / 1,539
79
#473 / 1,539
#453 / 875
#116 / 363
6,370
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.sg

Overview
2021-12-14 10:06:17
#53,974
5,544
-826 (-14.90%)
Psyk0killer
Kingston A400 SSD on Pi4 Quirk

Storage Details
SanDisk Ultra II
SSD (2.5" SATA)
480G
SSD
SanDisk
UltraII480GB
2.5 inch
SATA
3.00
5,000
152d:1561
0x152d (JMicron Technology Corp. / JMicron USA Technology Corp.)
0x1561
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
ARMv7 v7l
4
1,500
500
1,600

Operating System

Raspbian GNU/Linux 11 (bullseye)
armv7l

Benchmark Results
160 MB/s
164.64 MB/s
148.41 MB/s
5,125 IOPS
3,728 IOPS
20,500 KB/s
14,913 KB/s
18,574 KB/s
19,986 KB/s
14,936 KB/s
22,617 KB/s

inxi Results
System: Kernel: 5.10.83-v7l+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 usb-storage.quirks=152d:1561:u console=ttyS0,115200 console=tty1 root=PARTUUID=d517f0c0-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: N/A DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 11 (bullseye) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2711 rev: c03112 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.82 GiB used: 626.5 MiB (16.0%) gpu: 76 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 3 bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: X.org 1.20.11 compositor: xcompmgr driver: loaded: modesetting unloaded: fbdev tty: N/A Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Sound Server-1: ALSA v: k5.10.83-v7l+ running: yes Sound Server-2: JACK v: 1.9.17 running: no Sound Server-3: PulseAudio v: 14.2 running: yes Sound Server-4: PipeWire v: 0.3.19 running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: down mac: Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-1: docker0 state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: veth55a6525 state: up speed: 10000 Mbps duplex: full mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept service-classes: rendering, capturing, audio Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 505.23 GiB used: 23.28 GiB (4.6%) ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: SanDisk model: SD64G size: 58.09 GiB block-size: physical: 512 B logical: 512 B type: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Sabrent model: SABRENT drive vendor: SanDisk drive model: Ultra II 480GB family: Marvell based SSDs size: 447.13 GiB block-size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s type: SSD rev: 0204 drive rev: X41320RL temp: 29 C scheme: MBR SMART: yes state: enabled health: PASSED on: 328d 5h cycles: 3773 Message: No optical or floppy data found. Partition: ID-1: / raw-size: 446.88 GiB size: 439.8 GiB (98.42%) used: 14.37 GiB (3.3%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: d17cceb3-e738-4246-a306-2550abb8e01e ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.2 MiB (19.1%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 1B13-F78A ID-3: /media/pi/boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.1 MiB (19.1%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p6 maj-min: 179:6 label: boot uuid: 02A8-68AF ID-4: /media/pi/root raw-size: 55.43 GiB size: 54.43 GiB (98.20%) used: 8.81 GiB (16.2%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p7 maj-min: 179:7 label: root uuid: eb7b53d8-fcfa-4e12-b23c-609ed3efe24c Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p1 maj-min: 179:1 size: 2.38 GiB fs: vfat label: RECOVERY uuid: 1DED-7CB0 ID-2: /dev/mmcblk0p2 maj-min: 179:2 size: 1 KiB fs: N/A label: N/A uuid: N/A ID-3: /dev/mmcblk0p5 maj-min: 179:5 size: 32 MiB fs: ext4 label: SETTINGS uuid: e92eb628-ba2a-431d-a347-a064f12bd5de USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Device-1: 1-1.4:3 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s power: 98mA chip-ID: 046d:c52b class-ID: 0300 Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-2:2 info: JMicron / JMicron USA JMS561U two ports SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 896mA chip-ID: 152d:1561 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 2040 lib: 1016 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https: //download.docker.com/linux/raspbian bullseye stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ bullseye main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 242 1: cpu: 4.1% command: packagekitd pid: 1639 mem: 18.5 MiB (0.4%) 2: cpu: 2.4% command: init pid: 1 mem: 8.58 MiB (0.2%) 3: cpu: 1.3% command: [usb-storage] pid: 93 mem: 0.00 MiB (0.0%) 4: cpu: 1.3% command: xorg pid: 626 mem: 73.3 MiB (1.9%) 5: cpu: 1.1% command: dockerd pid: 519 mem: 55.6 MiB (1.4%) Memory top: 5 of 242 1: mem: 93.2 MiB (2.4%) command: mysqld pid: 1663 cpu: 0.6% 2: mem: 73.3 MiB (1.9%) command: xorg pid: 626 cpu: 1.3% 3: mem: 63.1 MiB (1.6%) command: pcmanfm pid: 1180 cpu: 0.9% 4: mem: 60.4 MiB (1.5%) command: lxpanel pid: 1179 cpu: 1.1% 5: mem: 55.6 MiB (1.4%) command: dockerd pid: 519 cpu: 1.1% Info: Processes: 242 Uptime: 2m Init: systemd v: 247 runlevel: 5 target: graphical.target tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.09

inxi Results

System:    Kernel: 5.10.83-v7l+ armv7l bits: 32 compiler: N/A
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0
           snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000
           vc_mem.mem_size=0x3ff00000 usb-storage.quirks=152d:1561:u console=ttyS0,115200
           console=tty1 root=PARTUUID=d517f0c0-02 rootfstype=ext4 fsck.repair=yes rootwait quiet
           splash plymouth.ignore-serial-consoles
           Console: N/A DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 11 (bullseye)
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2711 rev: c03112
           Battery:   Message: No system battery data found. Is one present?
Memory:    RAM: total: 3.82 GiB used: 626.5 MiB (16.0%) gpu: 76 MiB
           RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots: ARM: No ARM data found for this feature.
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l
           family: 7 model-id: 0 stepping: 3 bogomips: 1080
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500
           4: 1500
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32
           vfpv3 vfpv4
           Vulnerabilities: No CPU vulnerability/bugs data available.
Graphics:  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700
           class-ID: hdmi
           Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700
           class-ID: hdmi
           Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu
           class-ID: gpu
           Display: server: X.org 1.20.11 compositor: xcompmgr driver: loaded: modesetting
           unloaded: fbdev tty: N/A
           Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:     Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700
           class-ID: hdmi
           Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700
           class-ID: hdmi
           Device-3: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio
           class-ID: bcm2835_audio
           Sound Server-1: ALSA v: k5.10.83-v7l+ running: yes
           Sound Server-2: JACK v: 1.9.17 running: no
           Sound Server-3: PulseAudio v: 14.2 running: yes
           Sound Server-4: PipeWire v: 0.3.19 running: yes
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A
           chip-ID: brcm:fe300000 class-ID: mmcnr
           IF: wlan0 state: down mac: 
           Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A
           chip-ID: brcm:fd580000 class-ID: ethernet
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 
           IP v4:  type: noprefixroute scope: global broadcast: 
           IP v6:  scope: link
           IF-ID-1: docker0 state: up speed: 10000 Mbps duplex: unknown mac: 
           IP v4:  scope: global broadcast: 
           IP v6:  scope: link
           IF-ID-2: veth55a6525 state: up speed: 10000 Mbps duplex: full mac: 
           WAN IP: 
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
           Report: hciconfig ID: hci0 rfk-id: 1 state: up address:  bt-v: 3.0 lmp-v: 5.0
           sub-v: 6119 hci-v: 5.0 rev: 156
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept
           service-classes: rendering, capturing, audio
Logical:   Message: No logical block device data found.
RAID:      Message: No RAID data found.
Drives:    Local Storage: total: 505.23 GiB used: 23.28 GiB (4.6%)
           ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: SanDisk model: SD64G size: 58.09 GiB
           block-size: physical: 512 B logical: 512 B type: SSD scheme: MBR
           SMART Message: Unknown smartctl error. Unable to generate data.
           ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Sabrent model: SABRENT
           drive vendor: SanDisk drive model: Ultra II 480GB family: Marvell based SSDs
           size: 447.13 GiB block-size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s
           type: SSD rev: 0204 drive rev: X41320RL
           temp: 29 C scheme: MBR
           SMART: yes state: enabled health: PASSED on: 328d 5h cycles: 3773
           Message: No optical or floppy data found.
Partition: ID-1: / raw-size: 446.88 GiB size: 439.8 GiB (98.42%) used: 14.37 GiB (3.3%) fs: ext4
           block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs
           uuid: d17cceb3-e738-4246-a306-2550abb8e01e
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.2 MiB (19.1%) fs: vfat
           block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 1B13-F78A
           ID-3: /media/pi/boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.1 MiB (19.1%)
           fs: vfat block-size: 512 B dev: /dev/mmcblk0p6 maj-min: 179:6 label: boot
           uuid: 02A8-68AF
           ID-4: /media/pi/root raw-size: 55.43 GiB size: 54.43 GiB (98.20%)
           used: 8.81 GiB (16.2%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p7 maj-min: 179:7
           label: root uuid: eb7b53d8-fcfa-4e12-b23c-609ed3efe24c
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
           ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap
Unmounted: ID-1: /dev/mmcblk0p1 maj-min: 179:1 size: 2.38 GiB fs: vfat label: RECOVERY
           uuid: 1DED-7CB0
           ID-2: /dev/mmcblk0p2 maj-min: 179:2 size: 1 KiB fs: N/A label: N/A uuid: N/A
           ID-3: /dev/mmcblk0p5 maj-min: 179:5 size: 32 MiB fs: ext4 label: SETTINGS
           uuid: e92eb628-ba2a-431d-a347-a064f12bd5de
USB:       Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
           chip-ID: 1d6b:0002 class-ID: 0900
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA
           chip-ID: 2109:3431 class-ID: 0900
           Device-1: 1-1.4:3 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID
           driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s power: 98mA
           chip-ID: 046d:c52b class-ID: 0300
           Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003
           class-ID: 0900
           Device-1: 2-2:2 info: JMicron / JMicron USA JMS561U two ports SATA 6Gb/s bridge
           type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s
           power: 896mA chip-ID: 152d:1561 class-ID: 0806 Sensors:   Missing: Required tool sensors not installed. Check --recommends
Repos:     Packages: apt: 2040 lib: 1016
           Active apt repos in: /etc/apt/sources.list
           1: deb http: //raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list
           1: deb [arch=armhf signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https: //download.docker.com/linux/raspbian bullseye stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list
           1: deb http: //archive.raspberrypi.org/debian/ bullseye main
           No active apt repos in: /etc/apt/sources.list.d/vscode.list
Processes: CPU top: 5 of 242
           1: cpu: 4.1% command: packagekitd pid: 1639 mem: 18.5 MiB (0.4%)
           2: cpu: 2.4% command: init pid: 1 mem: 8.58 MiB (0.2%)
           3: cpu: 1.3% command: [usb-storage] pid: 93 mem: 0.00 MiB (0.0%)
           4: cpu: 1.3% command: xorg pid: 626 mem: 73.3 MiB (1.9%)
           5: cpu: 1.1% command: dockerd pid: 519 mem: 55.6 MiB (1.4%)
           Memory top: 5 of 242
           1: mem: 93.2 MiB (2.4%) command: mysqld pid: 1663 cpu: 0.6%
           2: mem: 73.3 MiB (1.9%) command: xorg pid: 626 cpu: 1.3%
           3: mem: 63.1 MiB (1.6%) command: pcmanfm pid: 1180 cpu: 0.9%
           4: mem: 60.4 MiB (1.5%) command: lxpanel pid: 1179 cpu: 1.1%
           5: mem: 55.6 MiB (1.4%) command: dockerd pid: 519 cpu: 1.1%
Info:      Processes: 242 Uptime: 2m Init: systemd v: 247 runlevel: 5 target: graphical.target
           tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release
           inxi: 3.3.09

Benchmark #53974 - Brand: SanDisk Ultra II