Benchmark #5459 - pibenchmarks.com

Brand: SanDisk SDHC (SS32G)
C4
#328 / 1,672
35
#1,461 / 1,672
#283 / 389
844
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2019-12-21 05:22:27
#5,459
1,221
+377 (+30.88%)
Anonymous
toeter

Secure Digital (SD) Card Details
SanDisk SDHC (SS32G)
C4
29.5G
SD
SanDisk
SS32G
SDHC
3.00
0x03
SD
8.0
12/2014
Class 4
None
None
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
38.5 MB/s
31.29 MB/s
39.47 MB/s
662 IOPS
2,566 IOPS
2,649 KB/s
10,265 KB/s
9,278 KB/s
2,502 KB/s
8,095 KB/s
2,223 KB/s

inxi Results
System: Host: raspberrypi Kernel: 4.19.75-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 ipv6.disable=1 console=ttyS0,115200 console=tty1 root=PARTUUID=6c586e13-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 201.3 MiB (5.1%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 132x44 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.75-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IF-ID-2: wlan0 state: up mac: IP v4: type: noprefixroute scope: global broadcast: WAN IP: Drives: Local Storage: total: 59.54 GiB used: 2.20 GiB (3.7%) ID-1: /dev/mmcblk0 model: SS32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: OCZ model: ONYX Storage size: 29.82 GiB block size: physical: 512 B logical: 512 B scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 29.47 GiB size: 28.98 GiB (98.35%) used: 2.11 GiB (7.3%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.8 MiB (20.5%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 ID-3: /media/disk raw size: 29.82 GiB size: 29.22 GiB (98.01%) used: 44.0 MiB (0.1%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A uuid: 6131eb5a-17e3-4b5a-ac74-f3c8bd8490fc Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.2:3 info: Iomega Prestige Portable Hard Drive type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 059b:0470 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 0.4% command: [kworker/u8:2-events_unbound] pid: 1206 mem: 0.00 MiB (0.0%) 2: cpu: 0.2% command: init pid: 1 mem: 7.90 MiB (0.2%) 3: cpu: 0.2% command: bash pid: 1398 mem: 2.75 MiB (0.0%) 4: cpu: 0.1% command: [kworker/0:1-mm_percpu_wq] pid: 31 mem: 0.00 MiB (0.0%) 5: cpu: 0.1% command: [kworker/2:2h-kblockd] pid: 96 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 7.90 MiB (0.2%) command: init pid: 1 cpu: 0.2% 2: mem: 6.78 MiB (0.1%) command: systemd-journald pid: 298 cpu: 0.0% 3: mem: 6.33 MiB (0.1%) command: systemd pid: 614 cpu: 0.0% 4: mem: 6.02 MiB (0.1%) command: sshd: pid: 607 cpu: 0.0% 5: mem: 5.53 MiB (0.1%) command: systemd-logind pid: 360 cpu: 0.0% Info: Processes: 125 Uptime: 22m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: raspberrypi Kernel: 4.19.75-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 ipv6.disable=1 console=ttyS0,115200 console=tty1 
           root=PARTUUID=6c586e13-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 201.3 MiB (5.1%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 132x44 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.75-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           WAN IP:  
Drives:    Local Storage: total: 59.54 GiB used: 2.20 GiB (3.7%) 
           ID-1: /dev/mmcblk0 model: SS32G size: 29.72 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB vendor: OCZ model: ONYX Storage size: 29.82 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 29.47 GiB size: 28.98 GiB (98.35%) used: 2.11 GiB (7.3%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.8 MiB (20.5%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 
           ID-3: /media/disk raw size: 29.82 GiB size: 29.22 GiB (98.01%) used: 44.0 MiB (0.1%) 
           fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A 
           uuid: 6131eb5a-17e3-4b5a-ac74-f3c8bd8490fc 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.2:3 info: Iomega Prestige Portable Hard Drive type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 059b:0470 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 0.4% command: [kworker/u8:2-events_unbound] pid: 1206 mem: 0.00 MiB (0.0%) 
           2: cpu: 0.2% command: init pid: 1 mem: 7.90 MiB (0.2%) 
           3: cpu: 0.2% command: bash pid: 1398 mem: 2.75 MiB (0.0%) 
           4: cpu: 0.1% command: [kworker/0:1-mm_percpu_wq] pid: 31 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.1% command: [kworker/2:2h-kblockd] pid: 96 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 7.90 MiB (0.2%) command: init pid: 1 cpu: 0.2% 
           2: mem: 6.78 MiB (0.1%) command: systemd-journald pid: 298 cpu: 0.0% 
           3: mem: 6.33 MiB (0.1%) command: systemd pid: 614 cpu: 0.0% 
           4: mem: 6.02 MiB (0.1%) command: sshd: pid: 607 cpu: 0.0% 
           5: mem: 5.53 MiB (0.1%) command: systemd-logind pid: 360 cpu: 0.0% 
Info:      Processes: 125 Uptime: 22m Init: systemd v: 241 runlevel: 3 target: multi-user.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

Benchmark #5459 - Brand: SanDisk SDHC (SS32G)