Benchmark #54601 - pibenchmarks.com

Brand: Kingston SD OEM (00000)
C10 V10 U1
#127 / 1,700
152
#1,441 / 1,700
#276 / 404
991
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-12-25 13:45:40
#54,601
616
-375 (-60.88%)
Anonymous
microcenter 32gb on rpi4 4gb

Secure Digital (SD) Card Details
Kingston SD OEM (00000)
C10 V10 U1
28.8G
SD
Kingston
00000
SDHC
3.00
0x9f
TI
0.0
05/2021
Class 10
None
U1
V10

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
N/A
4
1,500
500
4 GB
1,600
42 (-9)

Operating System

Debian GNU/Linux 11 (bullseye)
aarch64

Benchmark Results
21.2 MB/s
37.19 MB/s
42.51 MB/s
294 IOPS
1,444 IOPS
1,178 KB/s
5,777 KB/s
6,373 KB/s
1,455 KB/s
3,758 KB/s
861 KB/s

inxi Results
System: Kernel: 5.10.0-8-arm64 aarch64 bits: 64 compiler: gcc v: 10.2.1 parameters: dma.dmachans=0x37f5 bcm2709.boardrev=0xc03114 bcm2709.serial=0x5459da08 bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty0 console=ttyS1,115200 root=/dev/mmcblk1p2 rw fsck.repair=yes net.ifnames=0 rootwait Console: N/A Distro: Debian GNU/Linux 11 (bullseye) Machine: Type: ARM System: Raspberry Pi 4 Model B Rev 1.4 details: N/A Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.7 GiB used: 1.03 GiB (27.8%) RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 Topology: cpus: 1x cores: 4 smt: cache: N/A Speed (MHz): avg: 800 high: 1100 min/max: 600/1500 scaling: driver: cpufreq-dt governor: schedutil cores: 1: 1100 2: 900 3: 600 4: 600 bogomips: 432 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: No display server data found. Headless machine? tty: 80x40 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Sound Server-1: ALSA v: k5.10.0-8-arm64 running: yes Network: Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: noprefixroute scope: link Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq IF-ID-1: docker0 state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: hassio state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-3: veth116930d state: up speed: 10000 Mbps duplex: full mac: IF-ID-4: veth59fc1e5 state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: veth6c2efc3 state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: vethb0f981a state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: vethb4ec8aa state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: vethe83dcec state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: vethf667b57 state: up speed: 10000 Mbps duplex: full mac: IF-ID-10: vethfadf6d2 state: up speed: 10000 Mbps duplex: full mac: IF-ID-11: wlan0 state: down mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: hardware: no software: no address: see --recommends Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial Report: This feature requires one of these tools: hciconfig/bt-adapter Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 1.85 TiB used: 902.7 GiB (47.7%) ID-1: /dev/mmcblk1 maj-min: 179:0 model: 00000 size: 29.12 GiB block-size: physical: 512 B logical: 512 B type: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Seagate model: Portable size: 1.82 TiB block-size: physical: 4096 B logical: 512 B type: N/A rev: 0712 scheme: MBR SMART Message: A mandatory SMART command failed. Various possible causes. Message: No optical or floppy data found. Partition: ID-1: / raw-size: 28.83 GiB size: 28.37 GiB (98.42%) used: 8.66 GiB (30.5%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk1p2 maj-min: 179:2 label: RASPIROOT uuid: 899ea962-703a-49b8-926a-33b14329c638 ID-2: /boot/firmware raw-size: 296 MiB size: 295.8 MiB (99.93%) used: 73.6 MiB (24.9%) fs: vfat block-size: 512 B dev: /dev/mmcblk1p1 maj-min: 179:1 label: RASPIFIRM uuid: 7F54-1442 ID-3: /mnt/seagate2t raw-size: 1.82 TiB size: 1.79 TiB (98.38%) used: 893.97 GiB (48.8%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: N/A uuid: 22e1e6b9-2106-46ba-954f-aec7ce6c7bd1 Swap: Alert: No swap data was found. Unmounted: ID-1: /dev/sda1 maj-min: 8:1 size: 256 MiB fs: vfat label: N/A uuid: 1F79-BB57 USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-1:2 info: Seagate RSS LLC Portable type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 896mA chip-ID: 0bc2:2344 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 483 lib: 277 Active apt repos in: /etc/apt/sources.list 1: deb http: //deb.debian.org/debian bullseye main contrib non-free 2: deb http: //security.debian.org/debian-security bullseye-security main contrib non-free Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=arm64 signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https: //download.docker.com/linux/debian bullseye stable Processes: CPU top: 5 of 205 1: cpu: 2.8% command: python3 pid: 4360 mem: 292.7 MiB (7.7%) 2: cpu: 0.9% command: python3 pid: 1459 mem: 93.6 MiB (2.4%) 3: cpu: 0.6% command: init pid: 1 mem: 9.99 MiB (0.2%) 4: cpu: 0.6% command: [kworker/u8:3-events_unbound] pid: 12429 mem: 0.00 MiB (0.0%) 5: cpu: 0.5% command: dockerd pid: 596 mem: 88.2 MiB (2.3%) Memory top: 5 of 205 1: mem: 292.7 MiB (7.7%) command: python3 pid: 4360 cpu: 2.8% 2: mem: 93.6 MiB (2.4%) command: python3 pid: 1459 cpu: 0.9% 3: mem: 88.2 MiB (2.3%) command: dockerd pid: 596 cpu: 0.5% 4: mem: 54.5 MiB (1.4%) command: docker pid: 1135 cpu: 0.0% 5: mem: 50.9 MiB (1.3%) command: containerd pid: 572 cpu: 0.0% Info: Processes: 205 Uptime: 24m Init: systemd v: 247 runlevel: 5 tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.11

inxi Results

System:
  Kernel: 5.10.0-8-arm64 aarch64 bits: 64 compiler: gcc v: 10.2.1 parameters:  dma.dmachans=0x37f5
    bcm2709.boardrev=0xc03114 bcm2709.serial=0x5459da08 bcm2709.uart_clock=48000000
    bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX
    vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty0 console=ttyS1,115200
    root=/dev/mmcblk1p2 rw fsck.repair=yes net.ifnames=0 rootwait
  Console: N/A Distro: Debian GNU/Linux 11 (bullseye)
Machine:
  Type: ARM System: Raspberry Pi 4 Model B Rev 1.4 details: N/A Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 3.7 GiB used: 1.03 GiB (27.8%)
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0
    stepping: 3
  Topology: cpus: 1x cores: 4 smt:  cache: N/A
  Speed (MHz): avg: 800 high: 1100 min/max: 600/1500 scaling: driver: cpufreq-dt
    governor: schedutil cores: 1: 1100 2: 900 3: 600 4: 600 bogomips: 432
  Features: asimd cpuid crc32 evtstrm fp
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 status: Vulnerable
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700
    class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700
    class-ID: hdmi
  Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu
  Display: server: No display server data found. Headless machine? tty: 80x40
  Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi
  Sound Server-1: ALSA v: k5.10.0-8-arm64 running: yes
Network:
  Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000
    class-ID: ethernet
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 
  IP v4:  type: dynamic noprefixroute scope: global broadcast: 
  IP v6:  type: noprefixroute scope: link
  Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A
    chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq
  IF-ID-1: docker0 state: up speed: 10000 Mbps duplex: unknown mac: 
  IP v4:  scope: global broadcast: 
  IP v6:  scope: link
  IF-ID-2: hassio state: up speed: 10000 Mbps duplex: unknown mac: 
  IP v4:  scope: global broadcast: 
  IP v6:  scope: link
  IF-ID-3: veth116930d state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-4: veth59fc1e5 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-5: veth6c2efc3 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-6: vethb0f981a state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-7: vethb4ec8aa state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-8: vethe83dcec state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-9: vethf667b57 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-10: vethfadf6d2 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-11: wlan0 state: down mac: 
  WAN IP: 
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
  Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: hardware: no
    software: no address: see --recommends
  Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial
  Report: This feature requires one of these tools: hciconfig/bt-adapter
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 1.85 TiB used: 902.7 GiB (47.7%)
  ID-1: /dev/mmcblk1 maj-min: 179:0 model: 00000 size: 29.12 GiB block-size: physical: 512 B
    logical: 512 B type: SSD scheme: MBR
  SMART Message: Unknown smartctl error. Unable to generate data.
  ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Seagate model: Portable size: 1.82 TiB
    block-size: physical: 4096 B logical: 512 B type: N/A rev: 0712 scheme: MBR
  SMART Message: A mandatory SMART command failed. Various possible causes.
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 28.83 GiB size: 28.37 GiB (98.42%) used: 8.66 GiB (30.5%) fs: ext4
    block-size: 4096 B dev: /dev/mmcblk1p2 maj-min: 179:2 label: RASPIROOT
    uuid: 899ea962-703a-49b8-926a-33b14329c638
  ID-2: /boot/firmware raw-size: 296 MiB size: 295.8 MiB (99.93%) used: 73.6 MiB (24.9%)
    fs: vfat block-size: 512 B dev: /dev/mmcblk1p1 maj-min: 179:1 label: RASPIFIRM uuid: 7F54-1442
  ID-3: /mnt/seagate2t raw-size: 1.82 TiB size: 1.79 TiB (98.38%) used: 893.97 GiB (48.8%)
    fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: N/A
    uuid: 22e1e6b9-2106-46ba-954f-aec7ce6c7bd1
Swap:
  Alert: No swap data was found.
Unmounted:
  ID-1: /dev/sda1 maj-min: 8:1 size: 256 MiB fs: vfat label: N/A uuid: 1F79-BB57
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA
    chip-ID: 2109:3431 class-ID: 0900
  Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003
    class-ID: 0900
  Device-1: 2-1:2 info: Seagate RSS LLC Portable type: Mass Storage driver: uas interfaces: 1
    rev: 3.0 speed: 5 Gb/s power: 896mA chip-ID: 0bc2:2344 class-ID: 0806 Sensors:
  Missing: Required tool sensors not installed. Check --recommends
Repos:
  Packages: apt: 483 lib: 277
  Active apt repos in: /etc/apt/sources.list
    1: deb http: //deb.debian.org/debian bullseye main contrib non-free
    2: deb http: //security.debian.org/debian-security bullseye-security main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/docker.list
    1: deb [arch=arm64 signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https: //download.docker.com/linux/debian bullseye stable
Processes:
  CPU top: 5 of 205
  1: cpu: 2.8% command: python3 pid: 4360 mem: 292.7 MiB (7.7%)
  2: cpu: 0.9% command: python3 pid: 1459 mem: 93.6 MiB (2.4%)
  3: cpu: 0.6% command: init pid: 1 mem: 9.99 MiB (0.2%)
  4: cpu: 0.6% command: [kworker/u8:3-events_unbound] pid: 12429 mem: 0.00 MiB (0.0%)
  5: cpu: 0.5% command: dockerd pid: 596 mem: 88.2 MiB (2.3%)
  Memory top: 5 of 205
  1: mem: 292.7 MiB (7.7%) command: python3 pid: 4360 cpu: 2.8%
  2: mem: 93.6 MiB (2.4%) command: python3 pid: 1459 cpu: 0.9%
  3: mem: 88.2 MiB (2.3%) command: dockerd pid: 596 cpu: 0.5%
  4: mem: 54.5 MiB (1.4%) command: docker pid: 1135 cpu: 0.0%
  5: mem: 50.9 MiB (1.3%) command: containerd pid: 572 cpu: 0.0%
Info:
  Processes: 205 Uptime: 24m Init: systemd v: 247 runlevel: 5 tool: systemctl Compilers:
  gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.11

Benchmark #54601 - Brand: Kingston SD OEM (00000)