Benchmark #5476 - pibenchmarks.com

Brand: SanDisk Z400s
SSD (2.5" SATA)
#292 / 1,539
29
#507 / 1,539
#487 / 875
#135 / 363
6,181
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2019-12-21 11:35:33
#5,476
2,762
-3,419 (-123.79%)
Anonymous

Storage Details
SanDisk Z400s
SSD (2.5" SATA)
64G
SSD
SanDisk
SD8SBAT064G1122
2.5 inch
SATA
2.00
480
0424:2509
0x0424 (Microchip Technology, Inc. (formerly SMSC))
0x2509 (AES2501)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B+ 1.3
Raspberry Pi 3 Model B Plus Rev 1.3
Raspberry Pi Foundation
1,400
250 (-150)
450 (-50)

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
32.5 MB/s
28.78 MB/s
26.32 MB/s
3,532 IOPS
2,486 IOPS
14,131 KB/s
9,945 KB/s
12,322 KB/s
13,140 KB/s
9,456 KB/s
13,489 KB/s

inxi Results
System: Host: SmartHomeNG Kernel: 4.19.58-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=640 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=tty1 root=PARTUUID=0e9422a4-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait rootdelay=5 consoleblank=0 cgroup_memory=1 cgroup_enable=memory Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 rev: a020d3 Memory: RAM: total: 1002.1 MiB used: 224.7 MiB (22.4%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 4: 1400 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 123x62 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.58-v7+ Network: Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:5 chip ID: 0424:7800 IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-1: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 59.63 GiB used: 3.70 GiB (6.2%) ID-1: /dev/sda type: USB vendor: SanDisk model: SD8SBAT064G1122 size: 59.63 GiB block size: physical: 512 B logical: 512 B rev: Z233 scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 59.37 GiB size: 58.45 GiB (98.45%) used: 3.66 GiB (6.3%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 40.4 MiB (16.0%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: F661-303B Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Device-1: 1-1.1.1:5 info: Standard Microsystems type: Network driver: lan78xx interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 Device-2: 1-1.2:4 info: JMicron / JMicron USA JMS539 JMS551 SATA 3Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 152d:2509 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi 2: deb-src http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 4.5% command: [kworker/2:2-events] pid: 68 mem: 0.00 MiB (0.0%) 2: cpu: 3.8% command: [kworker/2:4-events_freezable] pid: 399 mem: 0.00 MiB (0.0%) 3: cpu: 2.5% command: init pid: 1 mem: 7.89 MiB (0.8%) 4: cpu: 2.3% command: smarthome.py started by: python3 pid: 564 mem: 26.5 MiB (2.8%) 5: cpu: 1.3% command: [usb-storage] pid: 74 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 26.5 MiB (2.8%) command: smarthome.py started by: python3 pid: 564 cpu: 2.3% 2: mem: 21.7 MiB (2.3%) command: php-fpm: pid: 521 cpu: 0.1% 3: mem: 15.7 MiB (1.6%) command: smbd pid: 552 cpu: 0.1% 4: mem: 15.5 MiB (1.6%) command: unattended-upgrade-shutdown started by: python3 pid: 519 cpu: 0.2% 5: mem: 8.71 MiB (0.9%) command: snmpd pid: 525 cpu: 0.1% Info: Processes: 143 Uptime: 3m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: SmartHomeNG Kernel: 4.19.58-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=640 
           bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=tty1 root=PARTUUID=0e9422a4-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait rootdelay=5 consoleblank=0 
           cgroup_memory=1 cgroup_enable=memory 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 
           rev: a020d3 Memory:    RAM: total: 1002.1 MiB used: 224.7 MiB (22.4%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 
           Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 
           4: 1400 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 123x62 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.58-v7+ 
Network:   Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:5 
           chip ID: 0424:7800 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-1: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 59.63 GiB used: 3.70 GiB (6.2%) 
           ID-1: /dev/sda type: USB vendor: SanDisk model: SD8SBAT064G1122 size: 59.63 GiB 
           block size: physical: 512 B logical: 512 B rev: Z233 scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 59.37 GiB size: 58.45 GiB (98.45%) used: 3.66 GiB (6.3%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 40.4 MiB (16.0%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: F661-303B 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Device-1: 1-1.1.1:5 info: Standard Microsystems type: Network driver: lan78xx 
           interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 
           Device-2: 1-1.2:4 info: JMicron / JMicron USA JMS539 JMS551 SATA 3Gb/s bridge 
           type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 152d:2509 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           2: deb-src http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 4.5% command: [kworker/2:2-events] pid: 68 mem: 0.00 MiB (0.0%) 
           2: cpu: 3.8% command: [kworker/2:4-events_freezable] pid: 399 mem: 0.00 MiB (0.0%) 
           3: cpu: 2.5% command: init pid: 1 mem: 7.89 MiB (0.8%) 
           4: cpu: 2.3% command: smarthome.py started by: python3 pid: 564 mem: 26.5 MiB (2.8%) 
           5: cpu: 1.3% command: [usb-storage] pid: 74 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 26.5 MiB (2.8%) command: smarthome.py started by: python3 pid: 564 cpu: 2.3% 
           2: mem: 21.7 MiB (2.3%) command: php-fpm: pid: 521 cpu: 0.1% 
           3: mem: 15.7 MiB (1.6%) command: smbd pid: 552 cpu: 0.1% 
           4: mem: 15.5 MiB (1.6%) command: unattended-upgrade-shutdown started by: python3 
           pid: 519 cpu: 0.2% 
           5: mem: 8.71 MiB (0.9%) command: snmpd pid: 525 cpu: 0.1% 
Info:      Processes: 143 Uptime: 3m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 
           Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

Benchmark #5476 - Brand: SanDisk Z400s