Benchmark #54971 - pibenchmarks.com

Brand: SanDisk SD High Endurance (SH32G)
A2 C10 V30 U3
#97 / 1,539
115
#1,244 / 1,539
#220 / 369
1,048
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2022-01-02 03:39:31
#54,971
1,408
+360 (+25.57%)
Anonymous

Secure Digital (SD) Card Details
SanDisk SD High Endurance (SH32G)
A2 C10 V30 U3
29.4G
SD
SanDisk
SH32G
SDHC
6.00
0x03
SD
8.0
11/2021
Class 10
A2
U3
V30

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
N/A
4
1,500
500
2 GB
1,600
42 (-9)

Operating System

Debian GNU/Linux 11 (bullseye)
aarch64

Benchmark Results
32.3 MB/s
42.43 MB/s
36.44 MB/s
1,077 IOPS
3,026 IOPS
4,311 KB/s
12,104 KB/s
10,783 KB/s
2,485 KB/s
8,611 KB/s
3,745 KB/s

inxi Results
System: Host: picloud Kernel: 5.10.0-10-arm64 aarch64 bits: 64 compiler: gcc v: 10.2.1 parameters: dma.dmachans=0x37f5 bcm2709.boardrev=0xb03114 bcm2709.serial=0x86ae6f2e bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty0 console=ttyS1,115200 root=/dev/mmcblk1p2 rw fsck.repair=yes net.ifnames=0 rootwait Console: pty pts/1 Distro: Debian GNU/Linux 11 (bullseye) Machine: Type: ARM System: Raspberry Pi 4 Model B Rev 1.4 details: N/A Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 1.8 GiB used: 252 MiB (13.7%) RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 Topology: cpus: 1x cores: 4 smt: cache: N/A Speed (MHz): avg: 825 high: 1200 min/max: 600/1500 scaling: driver: cpufreq-dt governor: schedutil cores: 1: 1200 2: 900 3: 600 4: 600 bogomips: 432 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: No display server data found. Headless machine? resolution: Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Sound Server-1: ALSA v: k5.10.0-10-arm64 running: yes Network: Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic scope: global broadcast: 192.168.X.X IP v6: fdf4:bea3:b422:0:e65f:1ff:fe7d:e1b3/64 type: dynamic mngtmpaddr scope: global IP v6: fe80::e65f:1ff:fe7d:e1b3/64 scope: link Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq IF-ID-1: wlan0 state: down mac: XX:XX:XX:XX:XX:XX WAN IP: 79.218.X.X Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: hardware: no software: no address: see --recommends Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial Report: This feature requires one of these tools: hciconfig/bt-adapter Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 495.48 GiB used: 1.41 GiB (0.3%) ID-1: /dev/mmcblk1 maj-min: 179:0 vendor: Smart Modular Tech. model: SH32G size: 29.72 GiB block-size: physical: 512 B logical: 512 B type: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Crucial model: CT500MX5 00SSD1 drive model: CT500MX500SSD1 family: Micron Client SSDs size: 465.76 GiB block-size: physical: 4096 B logical: 512 B sata: 3.3 speed: 6.0 Gb/s type: SSD drive rev: 0204 drive rev: M3CR023 temp: 29 C scheme: MBR SMART: yes state: enabled health: PASSED on: 54d 8h cycles: 2339 written: 4.44 TiB Message: No optical or floppy data found. Partition: ID-1: / raw-size: 29.43 GiB size: 28.96 GiB (98.42%) used: 1.29 GiB (4.4%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk1p2 maj-min: 179:2 label: RASPIROOT uuid: 899ea962-703a-49b8-926a-33b14329c638 ID-2: /boot/firmware raw-size: 296 MiB size: 295.8 MiB (99.93%) used: 126 MiB (42.6%) fs: vfat block-size: 512 B dev: /dev/mmcblk1p1 maj-min: 179:1 label: RASPIFIRM uuid: 7F54-1442 Swap: Alert: No swap data was found. Unmounted: ID-1: /dev/sda1 maj-min: 8:1 size: 296 MiB fs: vfat label: RASPIFIRM uuid: 7F54-1442 ID-2: /dev/sda2 maj-min: 8:2 size: 29.43 GiB fs: ext4 label: RASPIROOT uuid: 899ea962-703a-49b8-926a-33b14329c638 ID-3: /dev/sda3 maj-min: 8:3 size: 436.04 GiB fs: ext4 label: CLOUDDATA uuid: c72695bf-1d72-4f18-ad0b-82b62ab69cab USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-2:2 info: JMicron / JMicron USA External Disk 3.0 type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 896mA chip-ID: 152d:1576 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 303 lib: 178 Active apt repos in: /etc/apt/sources.list 1: deb http://deb.debian.org/debian bullseye main contrib non-free 2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free Processes: CPU top: 5 of 120 1: cpu: 1.4% command: init pid: 1 mem: 9.61 MiB (0.5%) 2: cpu: 0.2% command: sshd: pid: 508 mem: 7.84 MiB (0.4%) 3: cpu: 0.1% command: [kworker/u8:0-events_unbound] pid: 703 mem: 0.00 MiB (0.0%) 4: cpu: 0.1% command: smartd pid: 1680 mem: 4.77 MiB (0.2%) 5: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) Memory top: 5 of 120 1: mem: 10.9 MiB (0.5%) command: systemd-resolved pid: 355 cpu: 0.0% 2: mem: 9.61 MiB (0.5%) command: init pid: 1 cpu: 1.4% 3: mem: 7.84 MiB (0.4%) command: systemd pid: 468 cpu: 0.0% 4: mem: 7.84 MiB (0.4%) command: sshd: pid: 508 cpu: 0.2% 5: mem: 7.68 MiB (0.4%) command: sshd: pid: 465 cpu: 0.0% Info: Processes: 120 Uptime: 9m Init: systemd v: 247 runlevel: 5 tool: systemctl Compilers: gcc: N/A Shell: storage.sh default: Bash v: 5.1.4 running-in: storage.sh (SSH) inxi: 3.3.11

inxi Results

System:
  Host: picloud Kernel: 5.10.0-10-arm64 aarch64 bits: 64 compiler: gcc
    v: 10.2.1 parameters:  dma.dmachans=0x37f5 bcm2709.boardrev=0xb03114
    bcm2709.serial=0x86ae6f2e bcm2709.uart_clock=48000000
    bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0
    smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000
    vc_mem.mem_size=0x40000000 console=tty0 console=ttyS1,115200
    root=/dev/mmcblk1p2 rw fsck.repair=yes net.ifnames=0 rootwait
  Console: pty pts/1 Distro: Debian GNU/Linux 11 (bullseye)
Machine:
  Type: ARM System: Raspberry Pi 4 Model B Rev 1.4 details: N/A
    Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 1.8 GiB used: 252 MiB (13.7%)
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8
    family: 8 model-id: 0 stepping: 3
  Topology: cpus: 1x cores: 4 smt:  cache: N/A
  Speed (MHz): avg: 825 high: 1200 min/max: 600/1500 scaling:
    driver: cpufreq-dt governor: schedutil cores: 1: 1200 2: 900 3: 600 4: 600
    bogomips: 432
  Features: asimd cpuid crc32 evtstrm fp
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 status: Vulnerable
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A
    chip-ID: brcm:fef00700 class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A
    chip-ID: brcm:fef05700 class-ID: hdmi
  Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A
    chip-ID: brcm:gpu class-ID: gpu
  Display: server: No display server data found. Headless machine?
    resolution: 
  Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700
    class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A
    chip-ID: brcm:fef05700 class-ID: hdmi
  Sound Server-1: ALSA v: k5.10.0-10-arm64 running: yes
Network:
  Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A
    chip-ID: brcm:fd580000 class-ID: ethernet
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IP v4: 192.168.X.X/24 type: dynamic scope: global
    broadcast: 192.168.X.X
  IP v6: fdf4:bea3:b422:0:e65f:1ff:fe7d:e1b3/64 type: dynamic mngtmpaddr
    scope: global
  IP v6: fe80::e65f:1ff:fe7d:e1b3/64 scope: link
  Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A
    bus-ID: N/A chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq
  IF-ID-1: wlan0 state: down mac: XX:XX:XX:XX:XX:XX
  WAN IP: 79.218.X.X
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000
    class-ID: serial
  Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found
    rfk-block: hardware: no software: no address: see --recommends
  Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0
    class-ID: serial
  Report: This feature requires one of these tools: hciconfig/bt-adapter
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 495.48 GiB used: 1.41 GiB (0.3%)
  ID-1: /dev/mmcblk1 maj-min: 179:0 vendor: Smart Modular Tech.
    model: SH32G size: 29.72 GiB block-size: physical: 512 B logical: 512 B
    type: SSD scheme: MBR
  SMART Message: Unknown smartctl error. Unable to generate data.
  ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Crucial
    model: CT500MX5 00SSD1 drive model: CT500MX500SSD1
    family: Micron Client SSDs size: 465.76 GiB block-size: physical: 4096 B
    logical: 512 B sata: 3.3 speed: 6.0 Gb/s type: SSD     drive rev: 0204 drive rev: M3CR023 temp: 29 C
    scheme: MBR
  SMART: yes state: enabled health: PASSED on: 54d 8h cycles: 2339
    written: 4.44 TiB
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 29.43 GiB size: 28.96 GiB (98.42%) used: 1.29 GiB (4.4%)
    fs: ext4 block-size: 4096 B dev: /dev/mmcblk1p2 maj-min: 179:2
    label: RASPIROOT uuid: 899ea962-703a-49b8-926a-33b14329c638
  ID-2: /boot/firmware raw-size: 296 MiB size: 295.8 MiB (99.93%)
    used: 126 MiB (42.6%) fs: vfat block-size: 512 B dev: /dev/mmcblk1p1
    maj-min: 179:1 label: RASPIFIRM uuid: 7F54-1442
Swap:
  Alert: No swap data was found.
Unmounted:
  ID-1: /dev/sda1 maj-min: 8:1 size: 296 MiB fs: vfat label: RASPIFIRM
    uuid: 7F54-1442
  ID-2: /dev/sda2 maj-min: 8:2 size: 29.43 GiB fs: ext4 label: RASPIROOT
    uuid: 899ea962-703a-49b8-926a-33b14329c638
  ID-3: /dev/sda3 maj-min: 8:3 size: 436.04 GiB fs: ext4 label: CLOUDDATA
    uuid: c72695bf-1d72-4f18-ad0b-82b62ab69cab
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0
    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s
    power: 100mA chip-ID: 2109:3431 class-ID: 0900
  Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s
    chip-ID: 1d6b:0003 class-ID: 0900
  Device-1: 2-2:2 info: JMicron / JMicron USA External Disk 3.0
    type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s
    power: 896mA chip-ID: 152d:1576 class-ID: 0806 Sensors:
  Missing: Required tool sensors not installed. Check --recommends
Repos:
  Packages: apt: 303 lib: 178
  Active apt repos in: /etc/apt/sources.list
    1: deb http://deb.debian.org/debian bullseye main contrib non-free
    2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
Processes:
  CPU top: 5 of 120
  1: cpu: 1.4% command: init pid: 1 mem: 9.61 MiB (0.5%)
  2: cpu: 0.2% command: sshd: pid: 508 mem: 7.84 MiB (0.4%)
  3: cpu: 0.1% command: [kworker/u8:0-events_unbound] pid: 703
    mem: 0.00 MiB (0.0%)
  4: cpu: 0.1% command: smartd pid: 1680 mem: 4.77 MiB (0.2%)
  5: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%)
  Memory top: 5 of 120
  1: mem: 10.9 MiB (0.5%) command: systemd-resolved pid: 355 cpu: 0.0%
  2: mem: 9.61 MiB (0.5%) command: init pid: 1 cpu: 1.4%
  3: mem: 7.84 MiB (0.4%) command: systemd pid: 468 cpu: 0.0%
  4: mem: 7.84 MiB (0.4%) command: sshd: pid: 508 cpu: 0.2%
  5: mem: 7.68 MiB (0.4%) command: sshd: pid: 465 cpu: 0.0%
Info:
  Processes: 120 Uptime: 9m Init: systemd v: 247 runlevel: 5 tool: systemctl
  Compilers: gcc: N/A Shell: storage.sh default: Bash v: 5.1.4
  running-in: storage.sh (SSH) inxi: 3.3.11

Benchmark #54971 - Brand: SanDisk SD High Endurance (SH32G)