Benchmark #55248 - pibenchmarks.com

Brand: Crucial MX500 Series
SSD (2.5" SATA)
#26 / 1,674
521
#522 / 1,674
#504 / 984
#94 / 370
6,882
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2022-01-07 07:15:55
#55,248
9,351
+2,469 (+26.40%)
Jan
tester

Storage Details
Crucial MX500 Series
SSD (2.5" SATA)
250G
SSD
Crucial
CT250MX500SSD1
2.5 inch
SATA
3.00
5,000
174c:1153
0x174c (ASMedia Technology Inc.)
0x1153 (ASM1153 SATA 3Gb/s bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
N/A
4
1,800 (+300)
500
4 GB
1,600

Operating System

Debian GNU/Linux 11 (bullseye)
aarch64

Benchmark Results
161 MB/s
305.24 MB/s
209.24 MB/s
23,219 IOPS
34,594 IOPS
92,879 KB/s
138,378 KB/s
20,555 KB/s
23,967 KB/s
20,518 KB/s
27,311 KB/s

inxi Results
System: Kernel: 5.10.0-10-arm64 aarch64 bits: 64 compiler: gcc v: 10.2.1 parameters: dma.dmachans=0x37f5 bcm2709.boardrev=0xc03114 bcm2709.serial=0xa9bf7ef2 bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=tty0 console=ttyS1,115200 root=/dev/sda2 rw fsck.repair=yes net.ifnames=0 rootwait Console: N/A Distro: Debian GNU/Linux 11 (bullseye) Machine: Type: ARM System: Raspberry Pi 4 Model B Rev 1.4 details: N/A Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.7 GiB used: 1.62 GiB (43.9%) RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 Topology: cpus: 1x cores: 4 smt: cache: N/A Speed (MHz): avg: 875 high: 1300 min/max: 600/1800 scaling: driver: cpufreq-dt governor: schedutil cores: 1: 1300 2: 1000 3: 600 4: 600 bogomips: 432 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: No display server data found. Headless machine? tty: 80x40 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Sound Server-1: ALSA v: k5.10.0-10-arm64 running: yes Network: Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: type: noprefixroute scope: link Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq IF-ID-1: br-55a131f9b43c state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: docker0 state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-3: hassio state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-4: veth1859005 state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: veth1902e1b state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: veth20cb850 state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: veth3e3d508 state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: veth3f5e230 state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: veth3f7dd82 state: up speed: 10000 Mbps duplex: full mac: IF-ID-10: veth41f3350 state: up speed: 10000 Mbps duplex: full mac: IF-ID-11: veth5c39c9a state: up speed: 10000 Mbps duplex: full mac: IF-ID-12: veth6b4f58e state: up speed: 10000 Mbps duplex: full mac: IF-ID-13: veth90fac0a state: up speed: 10000 Mbps duplex: full mac: IF-ID-14: veth9ef59e4 state: up speed: 10000 Mbps duplex: full mac: IF-ID-15: vethba0b7fa state: up speed: 10000 Mbps duplex: full mac: IF-ID-16: vethc1447f7 state: up speed: 10000 Mbps duplex: full mac: IF-ID-17: vethc687d20 state: up speed: 10000 Mbps duplex: full mac: IF-ID-18: vethfa44d9f state: up speed: 10000 Mbps duplex: full mac: IF-ID-19: wg0 state: unknown speed: N/A duplex: N/A mac: N/A IP v4: scope: global WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: rfkill ID: hci0 rfk-id: 0 state: down bt-service: not found rfk-block: hardware: no software: no address: see --recommends Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial Report: This feature requires one of these tools: hciconfig/bt-adapter Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 232.89 GiB used: 17.3 GiB (7.4%) ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Crucial model: CT250MX500SSD1 family: Micron Client SSDs size: 232.89 GiB block-size: physical: 4096 B logical: 512 B sata: 3.3 speed: 6.0 Gb/s type: SSD rev: M3CR043 temp: 32 C scheme: MBR SMART: yes state: enabled health: PASSED on: 47d 19h cycles: 22 written: 1.05 TiB Message: No optical or floppy data found. Partition: ID-1: / raw-size: 232.59 GiB size: 229.14 GiB (98.51%) used: 17.17 GiB (7.5%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT uuid: 899ea962-703a-49b8-926a-33b14329c638 ID-2: /boot/firmware raw-size: 296 MiB size: 295.8 MiB (99.93%) used: 126.3 MiB (42.7%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: RASPIFIRM uuid: 7F54-1442 Swap: Alert: No swap data was found. Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 1-1.3:3 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 100mA chip-ID: 1a40:0101 class-ID: 0900 Device-1: 1-1.3.4:5 info: Dresden Elektronik ZigBee gateway [ConBee II] type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 1cf1:0030 class-ID: 0a00 Hub-4: 1-1.4:4 info: Super Top 4-Port hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 100mA chip-ID: 14cd:8601 class-ID: 0900 Device-1: 1-1.4.3:7 info: Sigma Designs Aeotec Z-Stick Gen5 (ZW090) - UZB type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 0658:0200 class-ID: 0a00 Hub-5: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-2:2 info: ASMedia ASM1153 SATA 3Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip-ID: 174c:1153 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 532 lib: 287 Active apt repos in: /etc/apt/sources.list 1: deb http: //deb.debian.org/debian bullseye main contrib non-free 2: deb http: //security.debian.org/debian-security bullseye-security main contrib non-free Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=arm64 signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https: //download.docker.com/linux/debian bullseye stable Processes: CPU top: 5 of 289 1: cpu: 20.0% command: python3 pid: 5957 mem: 356.8 MiB (9.4%) 2: cpu: 6.8% command: node-red pid: 7692 mem: 129.0 MiB (3.4%) 3: cpu: 5.4% command: python3 pid: 2108 mem: 100.0 MiB (2.6%) 4: cpu: 3.8% command: zwave-server started by: node pid: 5641 mem: 90.2 MiB (2.3%) 5: cpu: 2.6% command: dockerd pid: 767 mem: 91.0 MiB (2.4%) Memory top: 5 of 289 1: mem: 356.8 MiB (9.4%) command: python3 pid: 5957 cpu: 20.0% 2: mem: 189.5 MiB (4.9%) command: mysqld pid: 4852 cpu: 1.6% 3: mem: 129.0 MiB (3.4%) command: node-red pid: 7692 cpu: 6.8% 4: mem: 100.0 MiB (2.6%) command: python3 pid: 2108 cpu: 5.4% 5: mem: 91.0 MiB (2.4%) command: dockerd pid: 767 cpu: 2.6% Info: Processes: 289 Uptime: 4m Init: systemd v: 247 runlevel: 5 tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.11

inxi Results

System:
  Kernel: 5.10.0-10-arm64 aarch64 bits: 64 compiler: gcc v: 10.2.1 parameters:
    dma.dmachans=0x37f5 bcm2709.boardrev=0xc03114 bcm2709.serial=0xa9bf7ef2
    bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0
    smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000
    console=tty0 console=ttyS1,115200 root=/dev/sda2 rw fsck.repair=yes net.ifnames=0 rootwait
  Console: N/A Distro: Debian GNU/Linux 11 (bullseye)
Machine:
  Type: ARM System: Raspberry Pi 4 Model B Rev 1.4 details: N/A Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 3.7 GiB used: 1.62 GiB (43.9%)
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0
    stepping: 3
  Topology: cpus: 1x cores: 4 smt:  cache: N/A
  Speed (MHz): avg: 875 high: 1300 min/max: 600/1800 scaling: driver: cpufreq-dt
    governor: schedutil cores: 1: 1300 2: 1000 3: 600 4: 600 bogomips: 432
  Features: asimd cpuid crc32 evtstrm fp
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 status: Vulnerable
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700
    class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700
    class-ID: hdmi
  Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu
  Display: server: No display server data found. Headless machine? tty: 80x40
  Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi
  Sound Server-1: ALSA v: k5.10.0-10-arm64 running: yes
Network:
  Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000
    class-ID: ethernet
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 
  IP v4:  type: noprefixroute scope: global broadcast: 
  IP v6:  type: noprefixroute scope: link
  Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A
    chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq
  IF-ID-1: br-55a131f9b43c state: up speed: 10000 Mbps duplex: unknown mac: 
  IP v4:  scope: global broadcast: 
  IP v6:  scope: link
  IF-ID-2: docker0 state: up speed: 10000 Mbps duplex: unknown mac: 
  IP v4:  scope: global broadcast: 
  IP v6:  scope: link
  IF-ID-3: hassio state: up speed: 10000 Mbps duplex: unknown mac: 
  IP v4:  scope: global broadcast: 
  IP v6:  scope: link
  IF-ID-4: veth1859005 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-5: veth1902e1b state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-6: veth20cb850 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-7: veth3e3d508 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-8: veth3f5e230 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-9: veth3f7dd82 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-10: veth41f3350 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-11: veth5c39c9a state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-12: veth6b4f58e state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-13: veth90fac0a state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-14: veth9ef59e4 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-15: vethba0b7fa state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-16: vethc1447f7 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-17: vethc687d20 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-18: vethfa44d9f state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-19: wg0 state: unknown speed: N/A duplex: N/A mac: N/A
  IP v4:  scope: global
  WAN IP: 
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
  Report: rfkill ID: hci0 rfk-id: 0 state: down bt-service: not found rfk-block: hardware: no
    software: no address: see --recommends
  Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial
  Report: This feature requires one of these tools: hciconfig/bt-adapter
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 232.89 GiB used: 17.3 GiB (7.4%)
  ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Crucial model: CT250MX500SSD1
    family: Micron Client SSDs size: 232.89 GiB block-size: physical: 4096 B logical: 512 B
    sata: 3.3 speed: 6.0 Gb/s type: SSD rev: M3CR043 temp: 32 C scheme: MBR
  SMART: yes state: enabled health: PASSED on: 47d 19h cycles: 22 written: 1.05 TiB
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 232.59 GiB size: 229.14 GiB (98.51%) used: 17.17 GiB (7.5%) fs: ext4
    block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT
    uuid: 899ea962-703a-49b8-926a-33b14329c638
  ID-2: /boot/firmware raw-size: 296 MiB size: 295.8 MiB (99.93%) used: 126.3 MiB (42.7%)
    fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: RASPIFIRM uuid: 7F54-1442
Swap:
  Alert: No swap data was found.
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA
    chip-ID: 2109:3431 class-ID: 0900
  Hub-3: 1-1.3:3 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 100mA
    chip-ID: 1a40:0101 class-ID: 0900
  Device-1: 1-1.3.4:5 info: Dresden Elektronik ZigBee gateway [ConBee II]
    type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s
    power: 100mA chip-ID: 1cf1:0030 class-ID: 0a00 Hub-4: 1-1.4:4 info: Super Top 4-Port hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 100mA
    chip-ID: 14cd:8601 class-ID: 0900
  Device-1: 1-1.4.3:7 info: Sigma Designs Aeotec Z-Stick Gen5 (ZW090) - UZB
    type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s
    power: 100mA chip-ID: 0658:0200 class-ID: 0a00
  Hub-5: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003
    class-ID: 0900
  Device-1: 2-2:2 info: ASMedia ASM1153 SATA 3Gb/s bridge type: Mass Storage driver: uas
    interfaces: 1 rev: 3.0 speed: 5 Gb/s chip-ID: 174c:1153 class-ID: 0806 Sensors:
  Missing: Required tool sensors not installed. Check --recommends
Repos:
  Packages: apt: 532 lib: 287
  Active apt repos in: /etc/apt/sources.list
    1: deb http: //deb.debian.org/debian bullseye main contrib non-free
    2: deb http: //security.debian.org/debian-security bullseye-security main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/docker.list
    1: deb [arch=arm64 signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https: //download.docker.com/linux/debian bullseye stable
Processes:
  CPU top: 5 of 289
  1: cpu: 20.0% command: python3 pid: 5957 mem: 356.8 MiB (9.4%)
  2: cpu: 6.8% command: node-red pid: 7692 mem: 129.0 MiB (3.4%)
  3: cpu: 5.4% command: python3 pid: 2108 mem: 100.0 MiB (2.6%)
  4: cpu: 3.8% command: zwave-server started by: node pid: 5641 mem: 90.2 MiB (2.3%)
  5: cpu: 2.6% command: dockerd pid: 767 mem: 91.0 MiB (2.4%)
  Memory top: 5 of 289
  1: mem: 356.8 MiB (9.4%) command: python3 pid: 5957 cpu: 20.0%
  2: mem: 189.5 MiB (4.9%) command: mysqld pid: 4852 cpu: 1.6%
  3: mem: 129.0 MiB (3.4%) command: node-red pid: 7692 cpu: 6.8%
  4: mem: 100.0 MiB (2.6%) command: python3 pid: 2108 cpu: 5.4%
  5: mem: 91.0 MiB (2.4%) command: dockerd pid: 767 cpu: 2.6%
Info:
  Processes: 289 Uptime: 4m Init: systemd v: 247 runlevel: 5 tool: systemctl Compilers:
  gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.11

Benchmark #55248 - Brand: Crucial MX500 Series