Benchmark #5542 - pibenchmarks.com

Brand: PNY Elite Portable
SSD (Portable)
#152 / 1,700
120
#592 / 1,700
#569 / 989
#86 / 145
6,589
	Amazon.com Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2019-12-22 10:16:18
#5,542
2,217
-4,372 (-197.20%)
Anonymous
PNY

Storage Details
PNY Elite Portable
SSD (Portable)
240G
SSD
PNY
ELITEPSSD
less than 1.8 inch
SATA
2.00
480
154b:f009
0x154b (PNY)
0xf009
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
250 (-250)
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
28.7 MB/s
25.23 MB/s
25.47 MB/s
3,464 IOPS
3,113 IOPS
13,858 KB/s
12,453 KB/s
9,622 KB/s
8,884 KB/s
7,500 KB/s
9,751 KB/s

inxi Results
System: Host: raspberrypi Kernel: 4.19.75-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 console=ttyS0,115200 console=tty1 root=PARTUUID=6c586e13-02 rootfstype=ext4 elevator=deadline fsck.repair=yes root=/dev/sda1 rootfstype=ext4 rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.88 GiB used: 258.7 MiB (6.5%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 152x59 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.75-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 283.05 GiB used: 3.64 GiB (1.3%) ID-1: /dev/mmcblk0 model: SC64G size: 59.48 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: PNY model: ELITE PSSD size: 223.57 GiB block size: physical: 512 B logical: 512 B scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 223.54 GiB size: 219.03 GiB (97.98%) used: 3.59 GiB (1.6%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A uuid: dd558c2a-9031-464f-a9cf-c9a3b0ba6ab2 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.8 MiB (21.0%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 Unmounted: ID-1: /dev/mmcblk0p2 size: 59.22 GiB fs: ext4 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: PNY type: Mass Storage driver: uas interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 154b:f009 Hub: 1-1.4:4 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 05e3:0608 Device-2: 1-1.4.1:5 info: Sigma Designs Aeotec Z-Stick Gen5 (ZW090) - UZB type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 0658:0200 Hub: 1-1.4.4:6 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 05e3:0608 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 0.7% command: openzwaved.py started by: python pid: 1314 mem: 34.5 MiB (0.8%) 2: cpu: 0.6% command: init pid: 1 mem: 7.91 MiB (0.2%) 3: cpu: 0.3% command: mysqld pid: 657 mem: 50.9 MiB (1.2%) 4: cpu: 0.2% command: fail2ban-server started by: python3 pid: 559 mem: 14.6 MiB (0.3%) 5: cpu: 0.2% command: apache2 pid: 678 mem: 18.8 MiB (0.4%) Memory top: 5 1: mem: 50.9 MiB (1.2%) command: mysqld pid: 657 cpu: 0.3% 2: mem: 34.5 MiB (0.8%) command: openzwaved.py started by: python pid: 1314 cpu: 0.7% 3: mem: 24.8 MiB (0.6%) command: apache2 pid: 658 cpu: 0.0% 4: mem: 20.4 MiB (0.5%) command: apache2 pid: 995 cpu: 0.0% 5: mem: 18.8 MiB (0.4%) command: apache2 pid: 678 cpu: 0.2% Info: Processes: 136 Uptime: 9m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: raspberrypi Kernel: 4.19.75-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 
           vc_mem.mem_size=0x3f600000 console=ttyS0,115200 console=tty1 root=PARTUUID=6c586e13-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes root=/dev/sda1 rootfstype=ext4 
           rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.88 GiB used: 258.7 MiB (6.5%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 152x59 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.75-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 283.05 GiB used: 3.64 GiB (1.3%) 
           ID-1: /dev/mmcblk0 model: SC64G size: 59.48 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB vendor: PNY model: ELITE PSSD size: 223.57 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 223.54 GiB size: 219.03 GiB (97.98%) used: 3.59 GiB (1.6%) fs: ext4 
           block size: 4096 B dev: /dev/sda1 label: N/A uuid: dd558c2a-9031-464f-a9cf-c9a3b0ba6ab2 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.8 MiB (21.0%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 
Unmounted: ID-1: /dev/mmcblk0p2 size: 59.22 GiB fs: ext4 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.3:3 info: PNY type: Mass Storage driver: uas interfaces: 1 rev: 2.1 
           speed: 480 Mb/s chip ID: 154b:f009 Hub: 1-1.4:4 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 05e3:0608 
           Device-2: 1-1.4.1:5 info: Sigma Designs Aeotec Z-Stick Gen5 (ZW090) - UZB 
           type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s 
           chip ID: 0658:0200 
           Hub: 1-1.4.4:6 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 05e3:0608 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 0.7% command: openzwaved.py started by: python pid: 1314 mem: 34.5 MiB (0.8%) 
           2: cpu: 0.6% command: init pid: 1 mem: 7.91 MiB (0.2%) 
           3: cpu: 0.3% command: mysqld pid: 657 mem: 50.9 MiB (1.2%) 
           4: cpu: 0.2% command: fail2ban-server started by: python3 pid: 559 mem: 14.6 MiB (0.3%) 
           5: cpu: 0.2% command: apache2 pid: 678 mem: 18.8 MiB (0.4%) 
           Memory top: 5 
           1: mem: 50.9 MiB (1.2%) command: mysqld pid: 657 cpu: 0.3% 
           2: mem: 34.5 MiB (0.8%) command: openzwaved.py started by: python pid: 1314 cpu: 0.7% 
           3: mem: 24.8 MiB (0.6%) command: apache2 pid: 658 cpu: 0.0% 
           4: mem: 20.4 MiB (0.5%) command: apache2 pid: 995 cpu: 0.0% 
           5: mem: 18.8 MiB (0.4%) command: apache2 pid: 678 cpu: 0.2% 
Info:      Processes: 136 Uptime: 9m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 
           Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

Benchmark #5542 - Brand: PNY Elite Portable