Benchmark #55451 - pibenchmarks.com

Brand: Undentified JMicron USB to SATA Adapter
SSD (2.5" SATA)
#12 / 1,675
891
#436 / 1,675
#422 / 984
#49 / 370
7,433
	Amazon.com AliExpress

Overview
2022-01-12 16:24:18
#55,451
8,312
+879 (+10.58%)
GRC
KS128gb pi4 2gb bullseye

Storage Details
Undentified JMicron USB to SATA Adapter
SSD (2.5" SATA)
119G
SSD
JMicron
JMicronTech
3.20
5,000
152d:0562
0x152d (JMicron Technology Corp. / JMicron USA Technology Corp.)
0x0562 (Netac Portable SSD Z6s)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
ARMv7 v7l
4
1,800 (+300)
500
2 GB
1,600

Operating System

Raspbian GNU/Linux 11 (bullseye)
armv7l

Benchmark Results
197 MB/s
280.44 MB/s
270.36 MB/s
11,623 IOPS
14,787 IOPS
46,492 KB/s
59,148 KB/s
32,006 KB/s
29,615 KB/s
22,156 KB/s
30,394 KB/s

inxi Results
System: Kernel: 5.10.63-v7l+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1280 bcm2708_fb.fbheight=1024 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=f0bb945c-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 1 DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 11 (bullseye) Machine: Type: ARM System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2711 rev: b03114 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 1.9 GiB used: 467.1 MiB (24.0%) gpu: 76 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 3 Topology: cpus: 1x cores: 4 smt: N/A cache: N/A Speed (MHz): avg: 1800 min/max: 600/1800 scaling: driver: cpufreq-dt governor: ondemand cores: 1: 1800 2: 1800 3: 1800 4: 1800 bogomips: 1296 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc class-ID: fb Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: X.org 1.20.11 driver: loaded: fbturbo tty: 80x40 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.63-v7l+ running: yes Sound Server-2: PulseAudio v: 14.2 running: yes Sound Server-3: PipeWire v: 0.3.19 running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-1: br-8b9b63d269d1 state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: br-9b6f8161c276 state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-3: docker0 state: down mac: IP v4: scope: global broadcast: IF-ID-4: veth5e6d890 state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: veth73abd68 state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: vethb245ada state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: vethdd758d1 state: up speed: 10000 Mbps duplex: full mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept service-classes: rendering, capturing, audio Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 119.24 GiB used: 4.84 GiB (4.1%) ID-1: /dev/sda maj-min: 8:0 type: USB vendor: JMicron Tech model: N/A size: 119.24 GiB block-size: physical: 4096 B logical: 512 B type: N/A rev: 0208 scheme: MBR SMART Message: A mandatory SMART command failed. Various possible causes. Message: No optical or floppy data found. Partition: ID-1: / raw-size: 118.99 GiB size: 117.09 GiB (98.40%) used: 4.8 GiB (4.1%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: 1232a209-2596-48f0-a078-731d10b918ad ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.1 MiB (19.1%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: E183-6233 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-1:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.2 speed: 5 Gb/s power: 896mA chip-ID: 152d:0562 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 1399 lib: 743 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https: //download.docker.com/linux/raspbian bullseye stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ bullseye main Processes: CPU top: 5 of 172 1: cpu: 2.1% command: influxd pid: 1561 mem: 95.7 MiB (5.1%) 2: cpu: 0.6% command: bash pid: 10871 mem: 2.91 MiB (0.1%) 3: cpu: 0.3% command: dockerd pid: 444 mem: 62.0 MiB (3.3%) 4: cpu: 0.3% command: sudo pid: 10870 mem: 4.03 MiB (0.2%) 5: cpu: 0.2% command: [irq/47-mmc0] pid: 87 mem: 0.00 MiB (0.0%) Memory top: 5 of 172 1: mem: 95.7 MiB (5.1%) command: influxd pid: 1561 cpu: 2.1% 2: mem: 64.9 MiB (3.4%) command: node-red pid: 2003 cpu: 0.0% 3: mem: 62.0 MiB (3.3%) command: dockerd pid: 444 cpu: 0.3% 4: mem: 61.4 MiB (3.2%) command: grafana-server pid: 1475 cpu: 0.1% 5: mem: 57.5 MiB (3.0%) command: lxpanel pid: 852 cpu: 0.0% Info: Processes: 172 Uptime: 11h 32m Init: systemd v: 247 runlevel: 5 target: graphical.target tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.11

inxi Results

System:
  Kernel: 5.10.63-v7l+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0
    snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1280
    bcm2708_fb.fbheight=1024 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX
    vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1
    root=PARTUUID=f0bb945c-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash
    plymouth.ignore-serial-consoles
  Console: tty 1 DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 11 (bullseye)
Machine:
  Type: ARM System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2711 rev: b03114 Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 1.9 GiB used: 467.1 MiB (24.0%) gpu: 76 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: 0
    stepping: 3
  Topology: cpus: 1x cores: 4 smt: N/A cache: N/A
  Speed (MHz): avg: 1800 min/max: 600/1800 scaling: driver: cpufreq-dt governor: ondemand cores:
    1: 1800 2: 1800 3: 1800 4: 1800 bogomips: 1296
  Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4
  Vulnerabilities: No CPU vulnerability/bugs data available.
Graphics:
  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc class-ID: fb
  Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
  Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
  Display: server: X.org 1.20.11 driver: loaded: fbturbo tty: 80x40
  Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:
  Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio
    class-ID: bcm2835_audio
  Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
  Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
  Sound Server-1: ALSA v: k5.10.63-v7l+ running: yes
  Sound Server-2: PulseAudio v: 14.2 running: yes
  Sound Server-3: PipeWire v: 0.3.19 running: yes
Network:
  Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000
    class-ID: mmcnr
  IF: wlan0 state: up mac: 
  IP v4:  type: dynamic noprefixroute scope: global broadcast: 
  IP v6:  scope: link
  Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A
    chip-ID: brcm:fd580000 class-ID: ethernet
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 
  IP v4:  type: dynamic noprefixroute scope: global broadcast: 
  IP v6:  scope: link
  IF-ID-1: br-8b9b63d269d1 state: up speed: 10000 Mbps duplex: unknown mac: 
  IP v4:  scope: global broadcast: 
  IP v6:  scope: link
  IF-ID-2: br-9b6f8161c276 state: up speed: 10000 Mbps duplex: unknown mac: 
  IP v4:  scope: global broadcast: 
  IP v6:  scope: link
  IF-ID-3: docker0 state: down mac: 
  IP v4:  scope: global broadcast: 
  IF-ID-4: veth5e6d890 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-5: veth73abd68 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-6: vethb245ada state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-7: vethdd758d1 state: up speed: 10000 Mbps duplex: full mac: 
  WAN IP: 
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address:  bt-v: 3.0 lmp-v: 5.0
    sub-v: 6119 hci-v: 5.0 rev: 156
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept
    service-classes: rendering, capturing, audio
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 119.24 GiB used: 4.84 GiB (4.1%)
  ID-1: /dev/sda maj-min: 8:0 type: USB vendor: JMicron Tech model: N/A size: 119.24 GiB
    block-size: physical: 4096 B logical: 512 B type: N/A rev: 0208 scheme: MBR
  SMART Message: A mandatory SMART command failed. Various possible causes.
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 118.99 GiB size: 117.09 GiB (98.40%) used: 4.8 GiB (4.1%) fs: ext4
    block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs
    uuid: 1232a209-2596-48f0-a078-731d10b918ad
  ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.1 MiB (19.1%) fs: vfat
    block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: E183-6233
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
  ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA
    chip-ID: 2109:3431 class-ID: 0900
  Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003
    class-ID: 0900
  Device-1: 2-1:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage
    driver: uas interfaces: 1 rev: 3.2 speed: 5 Gb/s power: 896mA chip-ID: 152d:0562 class-ID: 0806
    Sensors:
  Missing: Required tool sensors not installed. Check --recommends
Repos:
  Packages: apt: 1399 lib: 743
  Active apt repos in: /etc/apt/sources.list
    1: deb http: //raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-free rpi
  Active apt repos in: /etc/apt/sources.list.d/docker.list
    1: deb [arch=armhf signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https: //download.docker.com/linux/raspbian bullseye stable
  Active apt repos in: /etc/apt/sources.list.d/raspi.list
    1: deb http: //archive.raspberrypi.org/debian/ bullseye main
Processes:
  CPU top: 5 of 172
  1: cpu: 2.1% command: influxd pid: 1561 mem: 95.7 MiB (5.1%)
  2: cpu: 0.6% command: bash pid: 10871 mem: 2.91 MiB (0.1%)
  3: cpu: 0.3% command: dockerd pid: 444 mem: 62.0 MiB (3.3%)
  4: cpu: 0.3% command: sudo pid: 10870 mem: 4.03 MiB (0.2%)
  5: cpu: 0.2% command: [irq/47-mmc0] pid: 87 mem: 0.00 MiB (0.0%)
  Memory top: 5 of 172
  1: mem: 95.7 MiB (5.1%) command: influxd pid: 1561 cpu: 2.1%
  2: mem: 64.9 MiB (3.4%) command: node-red pid: 2003 cpu: 0.0%
  3: mem: 62.0 MiB (3.3%) command: dockerd pid: 444 cpu: 0.3%
  4: mem: 61.4 MiB (3.2%) command: grafana-server pid: 1475 cpu: 0.1%
  5: mem: 57.5 MiB (3.0%) command: lxpanel pid: 852 cpu: 0.0%
Info:
  Processes: 172 Uptime: 11h 32m Init: systemd v: 247 runlevel: 5 target: graphical.target
  tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release
  inxi: 3.3.11

Benchmark #55451 - Brand: Undentified JMicron USB to SATA Adapter