Benchmark #55743 - pibenchmarks.com

Brand: Samsung PM871 Series
SSD (2.5" SATA)
#223 / 1,679
73
#629 / 1,679
#606 / 984
#152 / 370
6,318
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl

Overview
2022-01-19 08:50:17
#55,743
5,433
-885 (-16.29%)
Anonymous
Samsung CM871a SSD on Pi 4 using noname SATA to USB adapter

Storage Details
Samsung PM871 Series
SSD (2.5" SATA)
119G
SSD
Samsung
MZ7TY128HDHP-000
3.00
5,000
1f75:0888
0x1f75 (Innostor Technology Corporation)
0x0888 (IS888 SATA Storage Controller)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
ARMv7 v7l
4
1,500
500
4 GB
1,600

Operating System

Raspbian GNU/Linux 11 (bullseye)
armv7l

Benchmark Results
138 MB/s
148.99 MB/s
148.19 MB/s
5,080 IOPS
4,633 IOPS
20,322 KB/s
18,533 KB/s
23,074 KB/s
20,368 KB/s
18,304 KB/s
21,601 KB/s

inxi Results
System: Kernel: 5.10.92-v7l+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1680x1050M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=0ace27e2-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles lsm=apparmor Console: tty 1 wm: Mutter 3.38.6 DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 11 (bullseye) Machine: Type: ARM System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2711 rev: c03111 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.82 GiB used: 732.1 MiB (18.7%) gpu: 76 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 3 Topology: cpus: 1x cores: 4 smt: N/A cache: N/A Speed (MHz): avg: 900 min/max: 600/1500 scaling: driver: cpufreq-dt governor: ondemand cores: 1: 900 2: 900 3: 900 4: 900 bogomips: 1080 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: X.org 1.20.11 compositor: mutter v: 3.38.6 driver: loaded: modesetting unloaded: fbdev resolution: Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Sound Server-1: ALSA v: k5.10.92-v7l+ running: yes Sound Server-2: PulseAudio v: 14.2 running: yes Sound Server-3: PipeWire v: 0.3.19 running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: noprefixroute scope: link IF-ID-1: docker0 state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: hassio state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-3: veth348c2ee state: up speed: 10000 Mbps duplex: full mac: IF-ID-4: veth3df70af state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: veth4149a7c state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: veth4a2499f state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: veth5d9b377 state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: vethb041a7e state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: vethf36c8c7 state: up speed: 10000 Mbps duplex: full mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept service-classes: rendering, capturing, audio Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 119.24 GiB used: 6.69 GiB (5.6%) ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Samsung model: MZ7TY128HDHP-000 size: 119.24 GiB block-size: physical: 512 B logical: 512 B type: N/A rev: L1 scheme: MBR SMART Message: A mandatory SMART command failed. Various possible causes. Message: No optical or floppy data found. Partition: ID-1: / raw-size: 118.99 GiB size: 117.09 GiB (98.40%) used: 6.65 GiB (5.7%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: 1232a209-2596-48f0-a078-731d10b918ad ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.3 MiB (19.2%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: E183-6233 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Device-1: 1-1.3:3 info: Dell KB212-B Quiet Key Keyboard type: Keyboard driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s power: 100mA chip-ID: 413c:2107 class-ID: 0301 Device-2: 1-1.4:4 info: Logitech M90/M100 Optical Mouse type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s power: 100mA chip-ID: 046d:c05a class-ID: 0301 Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-2:2 info: Innostor IS888 SATA Storage Controller type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 800mA chip-ID: 1f75:0888 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 1407 lib: 747 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https: //download.docker.com/linux/raspbian bullseye stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ bullseye main Processes: CPU top: 5 of 245 1: cpu: 10.2% command: pulseaudio pid: 4459 mem: 6.39 MiB (0.1%) 2: cpu: 8.9% command: python3 pid: 4771 mem: 114.5 MiB (2.9%) 3: cpu: 8.5% command: packagekitd pid: 1478 mem: 19.5 MiB (0.5%) 4: cpu: 4.2% command: python3 pid: 2458 mem: 37.8 MiB (0.9%) 5: cpu: 4.0% command: xorg pid: 624 mem: 72.8 MiB (1.8%) Memory top: 5 of 245 1: mem: 114.5 MiB (2.9%) command: python3 pid: 4771 cpu: 8.9% 2: mem: 72.8 MiB (1.8%) command: xorg pid: 624 cpu: 4.0% 3: mem: 64.5 MiB (1.6%) command: pcmanfm pid: 905 cpu: 1.2% 4: mem: 62.5 MiB (1.6%) command: mutter pid: 899 cpu: 3.2% 5: mem: 57.5 MiB (1.4%) command: lxpanel pid: 904 cpu: 1.2% Info: Processes: 245 Uptime: 4m Init: systemd v: 247 runlevel: 5 target: graphical.target tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.12

inxi Results

System:
  Kernel: 5.10.92-v7l+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0
    snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1680x1050M@60
    smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000
    console=ttyS0,115200 console=tty1 root=PARTUUID=0ace27e2-02 rootfstype=ext4 fsck.repair=yes
    rootwait quiet splash plymouth.ignore-serial-consoles lsm=apparmor
  Console: tty 1 wm: Mutter 3.38.6 DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 11 (bullseye)
Machine:
  Type: ARM System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2711 rev: c03111 Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 3.82 GiB used: 732.1 MiB (18.7%) gpu: 76 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: 0
    stepping: 3
  Topology: cpus: 1x cores: 4 smt: N/A cache: N/A
  Speed (MHz): avg: 900 min/max: 600/1500 scaling: driver: cpufreq-dt governor: ondemand cores:
    1: 900 2: 900 3: 900 4: 900 bogomips: 1080
  Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4
  Vulnerabilities: No CPU vulnerability/bugs data available.
Graphics:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700
    class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700
    class-ID: hdmi
  Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu
  Display: server: X.org 1.20.11 compositor: mutter v: 3.38.6 driver: loaded: modesetting
    unloaded: fbdev resolution: 
  Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi
  Device-3: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio
    class-ID: bcm2835_audio
  Sound Server-1: ALSA v: k5.10.92-v7l+ running: yes
  Sound Server-2: PulseAudio v: 14.2 running: yes
  Sound Server-3: PipeWire v: 0.3.19 running: yes
Network:
  Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000
    class-ID: mmcnr
  IF: wlan0 state: up mac: 
  IP v4:  type: dynamic noprefixroute scope: global broadcast: 
  IP v6:  scope: link
  Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A
    chip-ID: brcm:fd580000 class-ID: ethernet
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 
  IP v4:  type: dynamic noprefixroute scope: global broadcast: 
  IP v6:  type: noprefixroute scope: link
  IF-ID-1: docker0 state: up speed: 10000 Mbps duplex: unknown mac: 
  IP v4:  scope: global broadcast: 
  IP v6:  scope: link
  IF-ID-2: hassio state: up speed: 10000 Mbps duplex: unknown mac: 
  IP v4:  scope: global broadcast: 
  IP v6:  scope: link
  IF-ID-3: veth348c2ee state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-4: veth3df70af state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-5: veth4149a7c state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-6: veth4a2499f state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-7: veth5d9b377 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-8: vethb041a7e state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-9: vethf36c8c7 state: up speed: 10000 Mbps duplex: full mac: 
  WAN IP: 
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address:  bt-v: 3.0 lmp-v: 5.0
    sub-v: 6119 hci-v: 5.0 rev: 156
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept
    service-classes: rendering, capturing, audio
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 119.24 GiB used: 6.69 GiB (5.6%)
  ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Samsung model: MZ7TY128HDHP-000 size: 119.24 GiB
    block-size: physical: 512 B logical: 512 B type: N/A rev: L1 scheme: MBR
  SMART Message: A mandatory SMART command failed. Various possible causes.
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 118.99 GiB size: 117.09 GiB (98.40%) used: 6.65 GiB (5.7%) fs: ext4
    block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs
    uuid: 1232a209-2596-48f0-a078-731d10b918ad
  ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.3 MiB (19.2%) fs: vfat
    block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: E183-6233
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
  ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA
    chip-ID: 2109:3431 class-ID: 0900
  Device-1: 1-1.3:3 info: Dell KB212-B Quiet Key Keyboard type: Keyboard
    driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s power: 100mA
    chip-ID: 413c:2107 class-ID: 0301
  Device-2: 1-1.4:4 info: Logitech M90/M100 Optical Mouse type: Mouse driver: hid-generic,usbhid
    interfaces: 1 rev: 2.0 speed: 1.5 Mb/s power: 100mA chip-ID: 046d:c05a class-ID: 0301
  Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003
    class-ID: 0900
  Device-1: 2-2:2 info: Innostor IS888 SATA Storage Controller type: Mass Storage
    driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 800mA chip-ID: 1f75:0888
    class-ID: 0806 Sensors:
  Missing: Required tool sensors not installed. Check --recommends
Repos:
  Packages: apt: 1407 lib: 747
  Active apt repos in: /etc/apt/sources.list
    1: deb http: //raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-free rpi
  Active apt repos in: /etc/apt/sources.list.d/docker.list
    1: deb [arch=armhf signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https: //download.docker.com/linux/raspbian bullseye stable
  Active apt repos in: /etc/apt/sources.list.d/raspi.list
    1: deb http: //archive.raspberrypi.org/debian/ bullseye main
Processes:
  CPU top: 5 of 245
  1: cpu: 10.2% command: pulseaudio pid: 4459 mem: 6.39 MiB (0.1%)
  2: cpu: 8.9% command: python3 pid: 4771 mem: 114.5 MiB (2.9%)
  3: cpu: 8.5% command: packagekitd pid: 1478 mem: 19.5 MiB (0.5%)
  4: cpu: 4.2% command: python3 pid: 2458 mem: 37.8 MiB (0.9%)
  5: cpu: 4.0% command: xorg pid: 624 mem: 72.8 MiB (1.8%)
  Memory top: 5 of 245
  1: mem: 114.5 MiB (2.9%) command: python3 pid: 4771 cpu: 8.9%
  2: mem: 72.8 MiB (1.8%) command: xorg pid: 624 cpu: 4.0%
  3: mem: 64.5 MiB (1.6%) command: pcmanfm pid: 905 cpu: 1.2%
  4: mem: 62.5 MiB (1.6%) command: mutter pid: 899 cpu: 3.2%
  5: mem: 57.5 MiB (1.4%) command: lxpanel pid: 904 cpu: 1.2%
Info:
  Processes: 245 Uptime: 4m Init: systemd v: 247 runlevel: 5 target: graphical.target
  tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release
  inxi: 3.3.12

Benchmark #55743 - Brand: Samsung PM871 Series