Benchmark #56358 - pibenchmarks.com

Brand: PNY SD High Performance (SD16G)
C10 U1
#116 / 1,539
97
#1,355 / 1,539
#281 / 369
720
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2022-02-04 22:34:50
#56,358
419
-301 (-71.84%)
Anonymous
SD Card

Secure Digital (SD) Card Details
PNY SD High Performance (SD16G)
C10 U1
14.3G
SD
PNY
SD16G
SD
6.00
0x27
PH
6.0
01/2020
Class 10
None
U1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B 1.2
Raspberry Pi 3 Model B Rev 1.2
Raspberry Pi Foundation
ARMv7 v7l
4
1,200
400
1 GB
450
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
7.7 MB/s
20.65 MB/s
17.28 MB/s
27 IOPS
1,659 IOPS
110 KB/s
6,638 KB/s
5,666 KB/s
1,335 KB/s
4,960 KB/s
108 KB/s

inxi Results
System: Kernel: 5.10.63-v7+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=48ac949e-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: pty pts/0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a22082 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 999.7 MiB used: 314 MiB (31.4%) gpu: 128 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 4 Topology: cpus: 1x cores: 4 smt: N/A cache: N/A Speed (MHz): avg: 1200 min/max: 600/1200 scaling: driver: cpufreq-dt governor: ondemand cores: 1: 1200 2: 1200 3: 1200 4: 1200 bogomips: 307 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc class-ID: fb Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: No display server data found. Headless machine? tty: 80x40 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.63-v7+ running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:3f300000 class-ID: mmcnr IF: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link Device-2: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus-ID: 1-1.1:3 chip-ID: 0424:ec00 class-ID: ff00 IF: eth0 state: down mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:3f201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: bt-v: 2.1 lmp-v: 4.1 sub-v: 2209 hci-v: 4.1 rev: 1fc Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 14.51 GiB used: 1.97 GiB (13.6%) ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: SanDisk model: SD16G size: 14.51 GiB block-size: physical: 512 B logical: 512 B type: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. Message: No optical or floppy data found. Partition: ID-1: / raw-size: 14.25 GiB size: 14 GiB (98.22%) used: 1.93 GiB (13.8%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs uuid: b3ce35cd-ade9-4755-a4bb-1571e37fc1b9 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.1 MiB (19.1%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: EBBA-157F Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 0424:9514 class-ID: 0900 Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 0424:ec00 class-ID: ff00 Device-2: 1-1.5:4 info: Future Devices FT232 Serial (UART) IC type: driver: ftdi_sio interfaces: 1 rev: 2.0 speed: 12 Mb/s power: 90mA chip-ID: 0403:6001 class-ID: 0000 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 733 lib: 451 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 130 1: cpu: 2.0% command: octoprint started by: python3 pid: 410 mem: 57.8 MiB (6.6%) 2: cpu: 1.9% command: [kworker/0:1-events] pid: 1593 mem: 0.00 MiB (0.0%) 3: cpu: 1.2% command: [kworker/u8:4-brcmf_wq/mmc1:0001:1] pid: 2639 mem: 0.00 MiB (0.0%) 4: cpu: 1.0% command: [kworker/1:3+events_power_efficient] pid: 893 mem: 0.00 MiB (0.0%) 5: cpu: 0.3% command: [kworker/u8:3-events_unbound] pid: 891 mem: 0.00 MiB (0.0%) Memory top: 5 of 130 1: mem: 57.8 MiB (6.6%) command: octoprint started by: python3 pid: 410 cpu: 2.0% 2: mem: 10.4 MiB (1.1%) command: haproxy pid: 610 cpu: 0.0% 3: mem: 8.22 MiB (0.9%) command: haproxy pid: 612 cpu: 0.0% 4: mem: 7.93 MiB (0.9%) command: init pid: 1 cpu: 0.2% 5: mem: 6.45 MiB (0.7%) command: systemd pid: 850 cpu: 0.0% Info: Processes: 130 Uptime: 1h 15m Init: systemd v: 241 runlevel: 5 tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.12

inxi Results

System:
  Kernel: 5.10.63-v7+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0
    snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=656
    bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000
    vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=48ac949e-02
    rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
  Console: pty pts/0 Distro: Raspbian GNU/Linux 10 (buster)
Machine:
  Type: ARM System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a22082 Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 999.7 MiB used: 314 MiB (31.4%) gpu: 128 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: 0
    stepping: 4
  Topology: cpus: 1x cores: 4 smt: N/A cache: N/A
  Speed (MHz): avg: 1200 min/max: 600/1200 scaling: driver: cpufreq-dt governor: ondemand cores:
    1: 1200 2: 1200 3: 1200 4: 1200 bogomips: 307
  Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4
  Vulnerabilities: No CPU vulnerability/bugs data available.
Graphics:
  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc class-ID: fb
  Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
  Display: server: No display server data found. Headless machine? tty: 80x40
  Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:
  Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio
    class-ID: bcm2835_audio
  Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
  Sound Server-1: ALSA v: k5.10.63-v7+ running: yes
Network:
  Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:3f300000
    class-ID: mmcnr
  IF: wlan0 state: up mac: 
  IP v4:  type: dynamic noprefixroute scope: global broadcast: 
  IP v6:  scope: link
  Device-2: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx
    bus-ID: 1-1.1:3 chip-ID: 0424:ec00 class-ID: ff00
  IF: eth0 state: down mac: 
  WAN IP: 
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:3f201000 class-ID: serial
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address:  bt-v: 2.1 lmp-v: 4.1
    sub-v: 2209 hci-v: 4.1 rev: 1fc
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 14.51 GiB used: 1.97 GiB (13.6%)
  ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: SanDisk model: SD16G size: 14.51 GiB block-size:
    physical: 512 B logical: 512 B type: SSD scheme: MBR
  SMART Message: Unknown smartctl error. Unable to generate data.
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 14.25 GiB size: 14 GiB (98.22%) used: 1.93 GiB (13.8%) fs: ext4
    block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs
    uuid: b3ce35cd-ade9-4755-a4bb-1571e37fc1b9
  ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.1 MiB (19.1%) fs: vfat
    block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: EBBA-157F
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
  ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s
    power: 2mA chip-ID: 0424:9514 class-ID: 0900
  Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter
    type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 2mA
    chip-ID: 0424:ec00 class-ID: ff00
  Device-2: 1-1.5:4 info: Future Devices FT232 Serial (UART) IC type: 
    driver: ftdi_sio interfaces: 1 rev: 2.0 speed: 12 Mb/s power: 90mA chip-ID: 0403:6001
    class-ID: 0000 Sensors:
  Missing: Required tool sensors not installed. Check --recommends
Repos:
  Packages: apt: 733 lib: 451
  Active apt repos in: /etc/apt/sources.list
    1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
  Active apt repos in: /etc/apt/sources.list.d/raspi.list
    1: deb http: //archive.raspberrypi.org/debian/ buster main
  No active apt repos in: /etc/apt/sources.list.d/vscode.list
Processes:
  CPU top: 5 of 130
  1: cpu: 2.0% command: octoprint started by: python3 pid: 410 mem: 57.8 MiB (6.6%)
  2: cpu: 1.9% command: [kworker/0:1-events] pid: 1593 mem: 0.00 MiB (0.0%)
  3: cpu: 1.2% command: [kworker/u8:4-brcmf_wq/mmc1:0001:1] pid: 2639 mem: 0.00 MiB (0.0%)
  4: cpu: 1.0% command: [kworker/1:3+events_power_efficient] pid: 893 mem: 0.00 MiB (0.0%)
  5: cpu: 0.3% command: [kworker/u8:3-events_unbound] pid: 891 mem: 0.00 MiB (0.0%)
  Memory top: 5 of 130
  1: mem: 57.8 MiB (6.6%) command: octoprint started by: python3 pid: 410 cpu: 2.0%
  2: mem: 10.4 MiB (1.1%) command: haproxy pid: 610 cpu: 0.0%
  3: mem: 8.22 MiB (0.9%) command: haproxy pid: 612 cpu: 0.0%
  4: mem: 7.93 MiB (0.9%) command: init pid: 1 cpu: 0.2%
  5: mem: 6.45 MiB (0.7%) command: systemd pid: 850 cpu: 0.0%
Info:
  Processes: 130 Uptime: 1h 15m Init: systemd v: 241 runlevel: 5 tool: systemctl Compilers:
  gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.12

Benchmark #56358 - Brand: PNY SD High Performance (SD16G)