Benchmark #56577 - pibenchmarks.com

Brand: SanDisk SD High Endurance (SH32G)
C10 U3
#106 / 1,665
140
#1,336 / 1,665
#216 / 389
1,102
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2022-02-08 10:24:21
#56,577
1,592
+490 (+30.78%)
Anonymous
SanDisk SD32G C10U3 on Pi 4

Secure Digital (SD) Card Details
SanDisk SD High Endurance (SH32G)
C10 U3
29.4G
SD
SanDisk
SH32G
SDHC
4.00
0x03
SD
8.0
03/2019
Class 10
None
U3
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
N/A
4
1,500
500
8 GB
1,600
42 (-9)

Operating System

Debian GNU/Linux 11 (bullseye)
aarch64

Benchmark Results
33.3 MB/s
41.45 MB/s
36.56 MB/s
1,164 IOPS
3,406 IOPS
4,658 KB/s
13,626 KB/s
11,955 KB/s
2,693 KB/s
11,172 KB/s
4,084 KB/s

inxi Results
System: Kernel: 5.10.0-11-arm64 aarch64 bits: 64 compiler: gcc v: 10.2.1 parameters: dma.dmachans=0x37f5 bcm2709.boardrev=0xd03114 bcm2709.serial=0x6a33ea30 bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty0 console=ttyS1,115200 root=/dev/mmcblk1p2 rw fsck.repair=yes net.ifnames=0 rootwait fsck.mode=force Console: pty pts/0 Distro: Debian GNU/Linux 11 (bullseye) Machine: Type: ARM System: Raspberry Pi 4 Model B Rev 1.4 details: N/A Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 7.7 GiB used: 1.35 GiB (17.5%) gpu: 76 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 Topology: cpus: 1x cores: 4 smt: cache: N/A Speed (MHz): avg: 800 high: 1100 min/max: 600/1500 scaling: driver: cpufreq-dt governor: schedutil cores: 1: 1100 2: 900 3: 600 4: 600 bogomips: 432 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: No display server data found. Headless machine? tty: 80x40 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Sound Server-1: ALSA v: k5.10.0-11-arm64 running: yes Network: Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: scope: global broadcast: IP v6: type: dynamic mngtmpaddr scope: global IP v6: type: dynamic mngtmpaddr scope: global IP v6: scope: link Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq IF-ID-1: wlan0 state: down mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: N/A rfk-block: hardware: no software: no address: see --recommends Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial Report: This feature requires one of these tools: hciconfig/bt-adapter Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 29.72 GiB used: 7 GiB (23.6%) ID-1: /dev/mmcblk1 maj-min: 179:0 vendor: Smart Modular Tech. model: SH32G size: 29.72 GiB block-size: physical: 512 B logical: 512 B type: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. Message: No optical or floppy data found. Partition: ID-1: / raw-size: 29.43 GiB size: 28.96 GiB (98.42%) used: 6.88 GiB (23.7%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk1p2 maj-min: 179:2 label: RASPIROOT uuid: 899ea962-703a-49b8-926a-33b14329c638 ID-2: /boot/firmware raw-size: 296 MiB size: 295.8 MiB (99.93%) used: 126.1 MiB (42.6%) fs: vfat block-size: 512 B dev: /dev/mmcblk1p1 maj-min: 179:1 label: RASPIFIRM uuid: 7F54-1442 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: zram size: 3.81 GiB used: 0 KiB (0.0%) priority: 100 dev: /dev/zram0 Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 499 lib: 261 Active apt repos in: /etc/apt/sources.list 1: deb https: //deb.debian.org/debian bullseye main contrib non-free 2: deb https: //deb.debian.org/debian-security/ bullseye-security main contrib non-free 3: deb https: //deb.debian.org/debian bullseye-updates main contrib non-free 4: deb https: //deb.debian.org/debian bullseye-backports main contrib non-free Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=arm64 signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https: //download.docker.com/linux/debian bullseye stable Processes: CPU top: 5 of 226 1: cpu: 0.5% command: tmux pid: 465976 mem: 3.47 MiB (0.0%) 2: cpu: 0.3% command: smartd pid: 467021 mem: 4.69 MiB (0.0%) 3: cpu: 0.2% command: containerd pid: 575 mem: 51.9 MiB (0.6%) 4: cpu: 0.1% command: slirp4netns pid: 548 mem: 21.2 MiB (0.2%) 5: cpu: 0.1% command: dockerd pid: 555 mem: 88.2 MiB (1.1%) Memory top: 5 of 226 1: mem: 88.2 MiB (1.1%) command: dockerd pid: 555 cpu: 0.1% 2: mem: 51.9 MiB (0.6%) command: containerd pid: 575 cpu: 0.2% 3: mem: 48.0 MiB (0.6%) command: smokeping_cgi started by: perl pid: 241482 cpu: 0.0% 4: mem: 41.5 MiB (0.5%) command: smokeping started by: perl pid: 241155 cpu: 0.0% 5: mem: 40.9 MiB (0.5%) command: node pid: 1953 cpu: 0.0% Info: Processes: 226 Uptime: 3d 21h 15m Init: systemd v: 247 runlevel: 5 tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.12

inxi Results

System:
  Kernel: 5.10.0-11-arm64 aarch64 bits: 64 compiler: gcc v: 10.2.1 parameters:
    dma.dmachans=0x37f5 bcm2709.boardrev=0xd03114 bcm2709.serial=0x6a33ea30
    bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0
    smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000
    console=tty0 console=ttyS1,115200 root=/dev/mmcblk1p2 rw fsck.repair=yes net.ifnames=0
    rootwait fsck.mode=force
  Console: pty pts/0 Distro: Debian GNU/Linux 11 (bullseye)
Machine:
  Type: ARM System: Raspberry Pi 4 Model B Rev 1.4 details: N/A Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 7.7 GiB used: 1.35 GiB (17.5%) gpu: 76 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0
    stepping: 3
  Topology: cpus: 1x cores: 4 smt:  cache: N/A
  Speed (MHz): avg: 800 high: 1100 min/max: 600/1500 scaling: driver: cpufreq-dt
    governor: schedutil cores: 1: 1100 2: 900 3: 600 4: 600 bogomips: 432
  Features: asimd cpuid crc32 evtstrm fp
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 status: Vulnerable
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700
    class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700
    class-ID: hdmi
  Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu
  Display: server: No display server data found. Headless machine? tty: 80x40
  Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi
  Sound Server-1: ALSA v: k5.10.0-11-arm64 running: yes
Network:
  Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000
    class-ID: ethernet
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 
  IP v4:  scope: global broadcast: 
  IP v6:  type: dynamic mngtmpaddr scope: global
  IP v6:  type: dynamic mngtmpaddr scope: global
  IP v6:  scope: link
  Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A
    chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq
  IF-ID-1: wlan0 state: down mac: 
  WAN IP: 
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
  Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: N/A rfk-block: hardware: no
    software: no address: see --recommends
  Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial
  Report: This feature requires one of these tools: hciconfig/bt-adapter
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 29.72 GiB used: 7 GiB (23.6%)
  ID-1: /dev/mmcblk1 maj-min: 179:0 vendor: Smart Modular Tech. model: SH32G size: 29.72 GiB
    block-size: physical: 512 B logical: 512 B type: SSD scheme: MBR
  SMART Message: Unknown smartctl error. Unable to generate data.
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 29.43 GiB size: 28.96 GiB (98.42%) used: 6.88 GiB (23.7%) fs: ext4
    block-size: 4096 B dev: /dev/mmcblk1p2 maj-min: 179:2 label: RASPIROOT
    uuid: 899ea962-703a-49b8-926a-33b14329c638
  ID-2: /boot/firmware raw-size: 296 MiB size: 295.8 MiB (99.93%) used: 126.1 MiB (42.6%)
    fs: vfat block-size: 512 B dev: /dev/mmcblk1p1 maj-min: 179:1 label: RASPIFIRM uuid: 7F54-1442
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
  ID-1: swap-1 type: zram size: 3.81 GiB used: 0 KiB (0.0%) priority: 100 dev: /dev/zram0
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA
    chip-ID: 2109:3431 class-ID: 0900
  Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003
    class-ID: 0900
Sensors:
  Missing: Required tool sensors not installed. Check --recommends
Repos:
  Packages: apt: 499 lib: 261
  Active apt repos in: /etc/apt/sources.list
    1: deb https: //deb.debian.org/debian bullseye main contrib non-free
    2: deb https: //deb.debian.org/debian-security/ bullseye-security main contrib non-free
    3: deb https: //deb.debian.org/debian bullseye-updates main contrib non-free
    4: deb https: //deb.debian.org/debian bullseye-backports main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/docker.list
    1: deb [arch=arm64 signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https: //download.docker.com/linux/debian bullseye stable
Processes:
  CPU top: 5 of 226
  1: cpu: 0.5% command: tmux pid: 465976 mem: 3.47 MiB (0.0%)
  2: cpu: 0.3% command: smartd pid: 467021 mem: 4.69 MiB (0.0%)
  3: cpu: 0.2% command: containerd pid: 575 mem: 51.9 MiB (0.6%)
  4: cpu: 0.1% command: slirp4netns pid: 548 mem: 21.2 MiB (0.2%)
  5: cpu: 0.1% command: dockerd pid: 555 mem: 88.2 MiB (1.1%)
  Memory top: 5 of 226
  1: mem: 88.2 MiB (1.1%) command: dockerd pid: 555 cpu: 0.1%
  2: mem: 51.9 MiB (0.6%) command: containerd pid: 575 cpu: 0.2%
  3: mem: 48.0 MiB (0.6%) command: smokeping_cgi started by: perl pid: 241482 cpu: 0.0%
  4: mem: 41.5 MiB (0.5%) command: smokeping started by: perl pid: 241155 cpu: 0.0%
  5: mem: 40.9 MiB (0.5%) command: node pid: 1953 cpu: 0.0%
Info:
  Processes: 226 Uptime: 3d 21h 15m Init: systemd v: 247 runlevel: 5 tool: systemctl Compilers:
  gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.12

Benchmark #56577 - Brand: SanDisk SD High Endurance (SH32G)