Benchmark #56858 - pibenchmarks.com

Brand: Generic USB Disk
USB Flash
#20 / 1,679
679
#949 / 1,679
#6 / 94
#9 / 89
4,006
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2022-02-15 07:27:22
#56,858
5,242
+1,236 (+23.58%)
Anonymous
USB test

Storage Details
Generic USB Disk
USB Flash
238.2G
USB Flash
Generic
GenericFlashDisk
3.00
5,000
2109:0711
0x2109
0x0711 (SMCWUSBT-G (no firmware))
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
N/A
4
1,500
500
4 GB
1,600

Operating System

Raspbian GNU/Linux 11 (bullseye)
aarch64

Benchmark Results
109 MB/s
136.96 MB/s
135.49 MB/s
5,297 IOPS
4,498 IOPS
21,189 KB/s
17,992 KB/s
17,532 KB/s
20,335 KB/s
17,403 KB/s
23,418 KB/s

inxi Results
System: Kernel: 5.10.92-v8+ aarch64 bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1280x720M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=734f7f88-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles apparmor=1 security=apparmor Console: tty 1 DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 11 (bullseye) Machine: Type: ARM System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.78 GiB used: 1.74 GiB (46.2%) gpu: 256 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 Topology: cpus: 1x cores: 4 smt: N/A cache: N/A Speed (MHz): avg: 1500 min/max: 600/1500 scaling: driver: cpufreq-dt governor: ondemand cores: 1: 1500 2: 1500 3: 1500 4: 1500 bogomips: 432 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: X.org 1.20.11 compositor: xcompmgr driver: loaded: modesetting unloaded: fbdev tty: 80x40 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.92-v8+ running: yes Sound Server-2: PipeWire v: 0.3.19 running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: down mac: Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: scope: global broadcast: IF-ID-1: docker0 state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: hassio state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-3: veth0c24022 state: up speed: 10000 Mbps duplex: full mac: IF-ID-4: veth0fbf464 state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: veth132c237 state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: veth2713956 state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: veth425feed state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: veth7c99c9a state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: veth8c5c690 state: up speed: 10000 Mbps duplex: full mac: IF-ID-10: vethaf6a732 state: up speed: 10000 Mbps duplex: full mac: IF-ID-11: vethbb00dde state: up speed: 10000 Mbps duplex: full mac: IF-ID-12: vethe951219 state: up speed: 10000 Mbps duplex: full mac: IF-ID-13: vethf0093d7 state: up speed: 10000 Mbps duplex: full mac: IF-ID-14: vethf29b45c state: up speed: 10000 Mbps duplex: full mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: down bt-service: enabled,running rfk-block: hardware: no software: yes address: Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Use of uninitialized value in string ne at ./inxi line 12117. Drives: Local Storage: total: 3.54 TiB used: 684.83 GiB (18.9%) ID-1: /dev/sda maj-min: 8:0 type: USB model: H W RAID1 size: 2.73 TiB block-size: physical: 512 B logical: 512 B type: N/A rev: 0101 SMART: yes state: enabled health: PASSED ID-2: /dev/sdb maj-min: 8:16 type: USB model: USB3.0 high speed size: 238.47 GiB block-size: physical: 512 B logical: 512 B type: N/A rev: 2210 scheme: MBR SMART Message: A mandatory SMART command failed. Various possible causes. ID-3: /dev/sdc maj-min: 8:32 type: USB vendor: Samsung model: HM640JZ size: 596.17 GiB block-size: physical: 512 B logical: 512 B type: HDD rpm: 7200 rev: 2AK1 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No optical or floppy data found. Partition: ID-1: / raw-size: 238.22 GiB size: 233.42 GiB (97.99%) used: 27.42 GiB (11.7%) fs: ext4 block-size: 512 B dev: /dev/sdb2 maj-min: 8:18 label: rootfs uuid: 3857a514-b0f4-49ce-8430-34762068bb6f ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.3 MiB (19.2%) fs: vfat block-size: 512 B dev: /dev/sdb1 maj-min: 8:17 label: boot uuid: 8D64-2011 ID-3: /media/pi/SAMSUNG raw-size: 596.17 GiB size: 596.17 GiB (100.00%) used: 532.63 GiB (89.3%) fs: ntfs block-size: 512 B dev: /dev/sdc1 maj-min: 8:33 label: SAMSUNG uuid: 7A30510A3050CF2F ID-4: /media/pi/a988abda-845e-4630-a54d-1e298e5e01c5 raw-size: 2.73 TiB size: 2.69 TiB (98.39%) used: 124.73 GiB (4.5%) fs: ext4 block-size: 512 B dev: /dev/sda maj-min: 8:0 label: N/A uuid: a988abda-845e-4630-a54d-1e298e5e01c5 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 20.9 MiB (20.9%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Device-1: 1-1.3:3 info: Prolific PL2303 Serial Port / Mobile Action MA-8910P type: driver: pl2303 interfaces: 1 rev: 1.1 speed: 12 Mb/s power: 100mA chip-ID: 067b:2303 class-ID: 0000 Device-2: 1-1.4:4 info: Samsung Samsung S2 Portable 3 type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip-ID: 04e8:6094 class-ID: 0806 Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-1:2 info: VIA Labs VL711 SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 896mA chip-ID: 2109:0711 class-ID: 0806 Device-2: 2-2:3 info: JMicron / JMicron USA JMS551 - Sharkoon SATA QuickPort Duo type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 8mA chip-ID: 152d:0561 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 1942 lib: 996 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian bullseye stable Active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list 1: deb [signed-by=/usr/share/keyrings/plex-archive-keyring.gpg] https: //downloads.plex.tv/repo/deb public main Active apt repos in: /etc/apt/sources.list.d/raspbian_stretch_for_mongodb.list 1: deb http: //archive.raspbian.org/raspbian stretch main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ bullseye main Active apt repos in: /etc/apt/sources.list.d/sury-php.list 1: deb https: //packages.sury.org/php/ bullseye main Active apt repos in: /etc/apt/sources.list.d/tvheadend.list 1: deb http: //apt.tvheadend.org/unstable raspbian-stretch main Processes: CPU top: 5 of 360 1: cpu: 15.6% command: php-fpm: pid: 17845 mem: 54.8 MiB (1.5%) 2: cpu: 8.1% command: php-fpm: pid: 20725 mem: 54.2 MiB (1.5%) 3: cpu: 7.8% command: php-fpm: pid: 20733 mem: 54.5 MiB (1.5%) 4: cpu: 4.0% command: influxd pid: 11007 mem: 134.0 MiB (3.7%) 5: cpu: 2.6% command: python3 pid: 12526 mem: 209.6 MiB (5.7%) Memory top: 5 of 360 1: mem: 209.6 MiB (5.7%) command: python3 pid: 12526 cpu: 2.6% 2: mem: 147.6 MiB (4.0%) command: mariadbd pid: 866 cpu: 0.2% 3: mem: 134.0 MiB (3.7%) command: influxd pid: 11007 cpu: 4.0% 4: mem: 119.1 MiB (3.2%) command: java pid: 2765 cpu: 1.1% 5: mem: 83.9 MiB (2.3%) command: named pid: 675 cpu: 0.0% Info: Processes: 360 Uptime: 3d 9h 24m Init: systemd v: 247 runlevel: 5 target: graphical.target tool: systemctl Compilers: gcc: 10.2.1 alt: 10/8 Client: shell wrapper v: 5.1.4-release inxi: 3.3.12

inxi Results

System:
  Kernel: 5.10.92-v8+ aarch64 bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0
    snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1280x720M@60
    smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000
    console=ttyS0,115200 console=tty1 root=PARTUUID=734f7f88-02 rootfstype=ext4 elevator=deadline
    fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles apparmor=1
    security=apparmor
  Console: tty 1 DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 11 (bullseye)
Machine:
  Type: ARM System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 3.78 GiB used: 1.74 GiB (46.2%) gpu: 256 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0
    stepping: 3
  Topology: cpus: 1x cores: 4 smt: N/A cache: N/A
  Speed (MHz): avg: 1500 min/max: 600/1500 scaling: driver: cpufreq-dt governor: ondemand cores:
    1: 1500 2: 1500 3: 1500 4: 1500 bogomips: 432
  Features: asimd cpuid crc32 evtstrm fp
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 status: Vulnerable
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu
  Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
  Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
  Display: server: X.org 1.20.11 compositor: xcompmgr driver: loaded: modesetting
    unloaded: fbdev tty: 80x40
  Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:
  Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio
    class-ID: bcm2835_audio
  Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
  Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
  Sound Server-1: ALSA v: k5.10.92-v8+ running: yes
  Sound Server-2: PipeWire v: 0.3.19 running: yes
Network:
  Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000
    class-ID: mmcnr
  IF: wlan0 state: down mac: 
  Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A
    chip-ID: brcm:fd580000 class-ID: ethernet
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 
  IP v4:  scope: global broadcast: 
  IF-ID-1: docker0 state: up speed: 10000 Mbps duplex: unknown mac: 
  IP v4:  scope: global broadcast: 
  IP v6:  scope: link
  IF-ID-2: hassio state: up speed: 10000 Mbps duplex: unknown mac: 
  IP v4:  scope: global broadcast: 
  IP v6:  scope: link
  IF-ID-3: veth0c24022 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-4: veth0fbf464 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-5: veth132c237 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-6: veth2713956 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-7: veth425feed state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-8: veth7c99c9a state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-9: veth8c5c690 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-10: vethaf6a732 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-11: vethbb00dde state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-12: vethe951219 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-13: vethf0093d7 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-14: vethf29b45c state: up speed: 10000 Mbps duplex: full mac: 
  WAN IP: 
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
  Report: hciconfig ID: hci0 rfk-id: 1 state: down bt-service: enabled,running rfk-block:
    hardware: no software: yes address: 
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Use of uninitialized value in string ne at ./inxi line 12117.
Drives:
  Local Storage: total: 3.54 TiB used: 684.83 GiB (18.9%)
  ID-1: /dev/sda maj-min: 8:0 type: USB model: H W RAID1 size: 2.73 TiB block-size:
    physical: 512 B logical: 512 B type: N/A rev: 0101
  SMART: yes state: enabled health: PASSED
  ID-2: /dev/sdb maj-min: 8:16 type: USB model: USB3.0 high speed size: 238.47 GiB block-size:
    physical: 512 B logical: 512 B type: N/A rev: 2210 scheme: MBR
  SMART Message: A mandatory SMART command failed. Various possible causes.
  ID-3: /dev/sdc maj-min: 8:32 type: USB vendor: Samsung model: HM640JZ size: 596.17 GiB
    block-size: physical: 512 B logical: 512 B type: HDD rpm: 7200 rev: 2AK1
    scheme: MBR
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 238.22 GiB size: 233.42 GiB (97.99%) used: 27.42 GiB (11.7%) fs: ext4
    block-size: 512 B dev: /dev/sdb2 maj-min: 8:18 label: rootfs
    uuid: 3857a514-b0f4-49ce-8430-34762068bb6f
  ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.3 MiB (19.2%) fs: vfat
    block-size: 512 B dev: /dev/sdb1 maj-min: 8:17 label: boot uuid: 8D64-2011
  ID-3: /media/pi/SAMSUNG raw-size: 596.17 GiB size: 596.17 GiB (100.00%)
    used: 532.63 GiB (89.3%) fs: ntfs block-size: 512 B dev: /dev/sdc1 maj-min: 8:33 label: SAMSUNG
    uuid: 7A30510A3050CF2F
  ID-4: /media/pi/a988abda-845e-4630-a54d-1e298e5e01c5 raw-size: 2.73 TiB
    size: 2.69 TiB (98.39%) used: 124.73 GiB (4.5%) fs: ext4 block-size: 512 B dev: /dev/sda
    maj-min: 8:0 label: N/A uuid: a988abda-845e-4630-a54d-1e298e5e01c5
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
  ID-1: swap-1 type: file size: 100 MiB used: 20.9 MiB (20.9%) priority: -2 file: /var/swap
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA
    chip-ID: 2109:3431 class-ID: 0900
  Device-1: 1-1.3:3 info: Prolific PL2303 Serial Port / Mobile Action MA-8910P
    type:  driver: pl2303 interfaces: 1 rev: 1.1 speed: 12 Mb/s power: 100mA
    chip-ID: 067b:2303 class-ID: 0000
  Device-2: 1-1.4:4 info: Samsung Samsung S2 Portable 3 type: Mass Storage driver: usb-storage
    interfaces: 1 rev: 2.1 speed: 480 Mb/s chip-ID: 04e8:6094 class-ID: 0806 Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003
    class-ID: 0900
  Device-1: 2-1:2 info: VIA Labs VL711 SATA 6Gb/s bridge type: Mass Storage driver: usb-storage
    interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 896mA chip-ID: 2109:0711 class-ID: 0806
    Device-2: 2-2:3 info: JMicron / JMicron USA JMS551 - Sharkoon SATA QuickPort Duo
    type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 8mA
    chip-ID: 152d:0561 class-ID: 0806 Sensors:
  Missing: Required tool sensors not installed. Check --recommends
Repos:
  Packages: apt: 1942 lib: 996
  Active apt repos in: /etc/apt/sources.list
    1: deb http: //raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-free rpi
  Active apt repos in: /etc/apt/sources.list.d/docker.list
    1: deb [arch=armhf] https: //download.docker.com/linux/raspbian bullseye stable
  Active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list
    1: deb [signed-by=/usr/share/keyrings/plex-archive-keyring.gpg] https: //downloads.plex.tv/repo/deb public main
  Active apt repos in: /etc/apt/sources.list.d/raspbian_stretch_for_mongodb.list
    1: deb http: //archive.raspbian.org/raspbian stretch main contrib non-free rpi
  Active apt repos in: /etc/apt/sources.list.d/raspi.list
    1: deb http: //archive.raspberrypi.org/debian/ bullseye main
  Active apt repos in: /etc/apt/sources.list.d/sury-php.list
    1: deb https: //packages.sury.org/php/ bullseye main
  Active apt repos in: /etc/apt/sources.list.d/tvheadend.list
    1: deb http: //apt.tvheadend.org/unstable raspbian-stretch main
Processes:
  CPU top: 5 of 360
  1: cpu: 15.6% command: php-fpm: pid: 17845 mem: 54.8 MiB (1.5%)
  2: cpu: 8.1% command: php-fpm: pid: 20725 mem: 54.2 MiB (1.5%)
  3: cpu: 7.8% command: php-fpm: pid: 20733 mem: 54.5 MiB (1.5%)
  4: cpu: 4.0% command: influxd pid: 11007 mem: 134.0 MiB (3.7%)
  5: cpu: 2.6% command: python3 pid: 12526 mem: 209.6 MiB (5.7%)
  Memory top: 5 of 360
  1: mem: 209.6 MiB (5.7%) command: python3 pid: 12526 cpu: 2.6%
  2: mem: 147.6 MiB (4.0%) command: mariadbd pid: 866 cpu: 0.2%
  3: mem: 134.0 MiB (3.7%) command: influxd pid: 11007 cpu: 4.0%
  4: mem: 119.1 MiB (3.2%) command: java pid: 2765 cpu: 1.1%
  5: mem: 83.9 MiB (2.3%) command: named pid: 675 cpu: 0.0%
Info:
  Processes: 360 Uptime: 3d 9h 24m Init: systemd v: 247 runlevel: 5 target: graphical.target
  tool: systemctl Compilers: gcc: 10.2.1 alt: 10/8 Client: shell wrapper v: 5.1.4-release
  inxi: 3.3.12

Benchmark #56858 - Brand: Generic USB Disk