Benchmark #5702 - pibenchmarks.com

Brand: SanDisk Ultra CZ48 USB
USB Flash
#53 / 1,700
346
#1,419 / 1,700
#39 / 94
#40 / 89
1,042
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2019-12-26 05:39:54
#5,702
1,278
+236 (+18.47%)
Anonymous
FLASH-USB Sandisk

Storage Details
SanDisk Ultra CZ48 USB
USB Flash
28.7G
USB Flash
SanDisk
Ultra
3.00
5,000
1d6b:558a
0x1d6b (Linux Foundation)
0x558a
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
40.5 MB/s
91.01 MB/s
91.13 MB/s
613 IOPS
1,694 IOPS
2,452 KB/s
6,779 KB/s
16,671 KB/s
3,966 KB/s
6,908 KB/s
2,574 KB/s

inxi Results
System: Host: raspberrypi Kernel: 4.19.75-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=/dev/sda1 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: LXDE info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 494.5 MiB (12.4%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 180x50 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.75-v7l+ Network: Device-1: Realtek RTL8153 Gigabit Ethernet Adapter type: USB driver: r8152 bus ID: 1-1.4.4:4 chip ID: 0bda:8153 IF: eth1 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 10.10.X.X/24 type: noprefixroute scope: global broadcast: 10.10.X.X IP v6: fe80::296a:5165:fd1a:dce1/64 scope: link IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: noprefixroute scope: global broadcast: 192.168.X.X IP v6: 2804:14c:6583:4748:61de:5f6a:65d3:3e7a/64 type: dynamic mngtmpaddr noprefixroute scope: global IP v6: fe80::7dd7:234d:71c5:4fa7/64 scope: link IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX WAN IP: No WAN IP data found. Connected to the web? SSL issues? Drives: Local Storage: total: 43.10 GiB used: 4.22 GiB (9.8%) ID-1: /dev/mmcblk0 vendor: SanDisk model: SL16G size: 14.46 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: SanDisk model: Ultra size: 28.64 GiB block size: physical: 512 B logical: 512 B rev: 1.00 scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 28.64 GiB size: 28.06 GiB (97.99%) used: 4.17 GiB (14.9%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A uuid: 10498ecf-ffea-4f4a-a77a-c1905819ae99 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.8 MiB (20.5%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 69D5-9B27 Unmounted: ID-1: /dev/mmcblk0p2 size: 14.20 GiB fs: ext4 label: rootfs uuid: 24eaa08b-10f2-49e0-8283-359f7eb1a0b6 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 1-1.4:3 info: Genesys Logic 4-port hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 05e3:0610 Device-1: 1-1.4.4:4 info: Realtek RTL8153 Gigabit Ethernet Adapter type: Network driver: r8152 interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0bda:8153 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-2: 2-1:2 info: SanDisk type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0781:558a Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 0.1% command: pihole-ftl pid: 899 mem: 179.8 MiB (4.6%) 2: cpu: 0.1% command: bash pid: 4434 mem: 2.72 MiB (0.0%) 3: cpu: 0.1% command: packagekitd pid: 4582 mem: 12.9 MiB (0.3%) 4: cpu: 0.0% command: init pid: 1 mem: 7.96 MiB (0.2%) 5: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 179.8 MiB (4.6%) command: pihole-ftl pid: 899 cpu: 0.1% 2: mem: 27.6 MiB (0.7%) command: pcmanfm pid: 2124 cpu: 0.0% 3: mem: 27.2 MiB (0.6%) command: lxpanel pid: 2122 cpu: 0.0% 4: mem: 25.7 MiB (0.6%) command: xvnc-core pid: 2013 cpu: 0.0% 5: mem: 25.7 MiB (0.6%) command: systemd-journald pid: 110 cpu: 0.0% Info: Processes: 169 Uptime: 20h 19m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh (sudo) running in: Storage.sh (SSH) inxi: 3.0.37

inxi Results

System:    Host: raspberrypi Kernel: 4.19.75-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=/dev/sda1 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles 
           Desktop: LXDE info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
Memory:    RAM: total: 3.89 GiB used: 494.5 MiB (12.4%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A 
           stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 180x50 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.75-v7l+ 
Network:   Device-1: Realtek RTL8153 Gigabit Ethernet Adapter type: USB driver: r8152 bus ID: 1-1.4.4:4 chip ID: 0bda:8153            IF: eth1 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IP v4: 10.10.X.X/24 type: noprefixroute scope: global broadcast: 10.10.X.X 
           IP v6: fe80::296a:5165:fd1a:dce1/64 scope: link 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: noprefixroute scope: global broadcast: 192.168.X.X 
           IP v6: 2804:14c:6583:4748:61de:5f6a:65d3:3e7a/64 type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6: fe80::7dd7:234d:71c5:4fa7/64 scope: link 
           IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX 
           WAN IP: No WAN IP data found. Connected to the web? SSL issues? 
Drives:    Local Storage: total: 43.10 GiB used: 4.22 GiB (9.8%) 
           ID-1: /dev/mmcblk0 vendor: SanDisk model: SL16G size: 14.46 GiB block size: physical: 512 B logical: 512 B 
           scheme: MBR 
           ID-2: /dev/sda type: USB vendor: SanDisk model: Ultra size: 28.64 GiB block size: physical: 512 B logical: 512 B 
           rev: 1.00 scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 28.64 GiB size: 28.06 GiB (97.99%) used: 4.17 GiB (14.9%) fs: ext4 block size: 4096 B 
           dev: /dev/sda1 label: N/A uuid: 10498ecf-ffea-4f4a-a77a-c1905819ae99 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.8 MiB (20.5%) fs: vfat block size: 512 B 
           dev: /dev/mmcblk0p1 label: boot uuid: 69D5-9B27 
Unmounted: ID-1: /dev/mmcblk0p2 size: 14.20 GiB fs: ext4 label: rootfs uuid: 24eaa08b-10f2-49e0-8283-359f7eb1a0b6 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 1-1.4:3 info: Genesys Logic 4-port hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 05e3:0610 
           Device-1: 1-1.4.4:4 info: Realtek RTL8153 Gigabit Ethernet Adapter type: Network driver: r8152 interfaces: 1 
           rev: 2.1 speed: 480 Mb/s chip ID: 0bda:8153 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 
           Device-2: 2-1:2 info: SanDisk type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s 
           chip ID: 0781:558a 
           Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http://archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 0.1% command: pihole-ftl pid: 899 mem: 179.8 MiB (4.6%) 
           2: cpu: 0.1% command: bash pid: 4434 mem: 2.72 MiB (0.0%) 
           3: cpu: 0.1% command: packagekitd pid: 4582 mem: 12.9 MiB (0.3%) 
           4: cpu: 0.0% command: init pid: 1 mem: 7.96 MiB (0.2%) 
           5: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 179.8 MiB (4.6%) command: pihole-ftl pid: 899 cpu: 0.1% 
           2: mem: 27.6 MiB (0.7%) command: pcmanfm pid: 2124 cpu: 0.0% 
           3: mem: 27.2 MiB (0.6%) command: lxpanel pid: 2122 cpu: 0.0% 
           4: mem: 25.7 MiB (0.6%) command: xvnc-core pid: 2013 cpu: 0.0% 
           5: mem: 25.7 MiB (0.6%) command: systemd-journald pid: 110 cpu: 0.0% 
Info:      Processes: 169 Uptime: 20h 19m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 
           alt: 8 Shell: Storage.sh (sudo) running in: Storage.sh (SSH) inxi: 3.0.37

Benchmark #5702 - Brand: SanDisk Ultra CZ48 USB