Benchmark #57112 - pibenchmarks.com

Brand: Samsung 870 QVO
SSD (2.5" SATA)
#131 / 1,665
114
#612 / 1,665
#591 / 977
#145 / 370
6,317
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2022-02-20 08:44:48
#57,112
491
-5,826 (-1,186.56%)
dukat

Storage Details
Samsung 870 QVO
SSD (2.5" SATA)
1.8T
SSD
Samsung
SSD870QVO
3.00
5,000
2109:0711
0x2109
0x0711 (SMCWUSBT-G (no firmware))
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
N/A
4
1,800 (+300)
500
4 GB
1,600

Operating System

Debian GNU/Linux 11 (bullseye)
aarch64

Benchmark Results
8.2 MB/s
208.11 MB/s
169.59 MB/s
54 IOPS
1,711 IOPS
217 KB/s
6,846 KB/s
5,355 KB/s
1,273 KB/s
6,388 KB/s
144 KB/s

inxi Results
System: Host: rpi4ha Kernel: 5.10.92-v8+ aarch64 bits: 64 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1024 bcm2708_fb.fbheight=600 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=6596edc7-02 rootfstype=ext4 fsck.repair=yes rootwait lsm=apparmor apparmor=1 security=apparmor Console: pty pts/1 Distro: Raspberry Pi OS base: Debian GNU/Linux 11 (bullseye) Machine: Type: ARM System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2835 rev: c03114 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.78 GiB used: 816.1 MiB (21.1%) gpu: 76 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 Topology: cpus: 1x cores: 4 smt: N/A cache: N/A Speed (MHz): avg: 1800 min/max: 600/1800 scaling: driver: cpufreq-dt governor: ondemand cores: 1: 1800 2: 1800 3: 1800 4: 1800 bogomips: 432 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc class-ID: fb Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: X.org 1.20.11 driver: loaded: fbdev unloaded: modesetting tty: 128x37 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.92-v8+ running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: down mac: XX:XX:XX:XX:XX:XX Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 172.17.X.X/24 type: dynamic noprefixroute scope: global broadcast: 172.17.X.X IP v6: fe80::8424:d013:a8a6:2771/64 type: noprefixroute scope: link IF-ID-1: docker0 state: up speed: 10000 Mbps duplex: unknown mac: XX:XX:XX:XX:XX:XX IP v4: 172.18.X.X/16 scope: global broadcast: 172.18.X.X IP v6: fe80::42:47ff:fecf:5bc1/64 scope: link IF-ID-2: hassio state: up speed: 10000 Mbps duplex: unknown mac: XX:XX:XX:XX:XX:XX IP v4: 172.30.X.X/23 scope: global broadcast: 172.30.X.X IP v6: fe80::42:96ff:fe22:96b/64 scope: link IF-ID-3: veth0b8d885 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-4: veth29d10ba state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-5: veth415d068 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-6: veth4b9b15d state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-7: veth7548d58 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-8: veth9b3868d state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-9: vethcf17845 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-10: vethd22d1e0 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX WAN IP: 58.84.X.X Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: XX:XX:XX:XX:XX:XX bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept service-classes: rendering, capturing, audio Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 1.85 TiB used: 24.48 GiB (1.3%) ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: SanDisk model: SU32G size: 29.72 GiB block-size: physical: 512 B logical: 512 B type: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Samsung model: SSD 870 QVO size: 1.82 TiB block-size: physical: 512 B logical: 512 B type: SSD rev: SVQ0 scheme: GPT SMART Message: A mandatory SMART command failed. Various possible causes. Message: No optical or floppy data found. Partition: ID-1: / raw-size: 29.47 GiB size: 28.98 GiB (98.34%) used: 7.84 GiB (27.1%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs uuid: 1943b829-a99b-45b8-9fe5-7136dbea4c4a ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 29.8 MiB (11.8%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: F914-FF4D ID-3: /mnt raw-size: 1.82 TiB size: 1.79 TiB (98.37%) used: 16.61 GiB (0.9%) fs: ext4 block-size: 4096 B dev: /dev/sda1 maj-min: 8:1 label: N/A uuid: 6b66ffa2-7cc8-493b-9fe6-b56233aaa7e3 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 768 KiB (0.8%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Device-1: 1-1.2:3 info: STMicro LED badge -- mini LED display -- 11x44 type: HID driver: hid-multitouch,usbhid interfaces: 1 rev: 0.0 speed: 12 Mb/s power: 64mA chip-ID: 0483:5750 class-ID: 0300 MPI7003അЉơƅ∉ʡ䈉 Device-2: 1-1.4:4 info: Dell KB212-B Quiet Key Keyboard type: Keyboard driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s power: 100mA chip-ID: 413c:2107 class-ID: 0301 Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-1:2 info: VIA Labs VL711 SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 896mA chip-ID: 2109:0711 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 934 lib: 452 Active apt repos in: /etc/apt/sources.list 1: deb http://deb.debian.org/debian bullseye main contrib non-free 2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free 3: deb http://deb.debian.org/debian bullseye-updates main contrib non-free Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=arm64 signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https://download.docker.com/linux/debian bullseye stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ bullseye main Processes: CPU top: 5 of 312 1: cpu: 4.5% command: python3 pid: 5010 mem: 292.7 MiB (7.7%) 2: cpu: 1.1% command: pulseaudio pid: 4014 mem: 9.62 MiB (0.2%) 3: cpu: 1.0% command: top pid: 9897 mem: 3.60 MiB (0.0%) 4: cpu: 0.6% command: [usb-storage] pid: 5570 mem: 0.00 MiB (0.0%) 5: cpu: 0.4% command: python3 pid: 1930 mem: 59.7 MiB (1.5%) Memory top: 5 of 312 1: mem: 292.7 MiB (7.7%) command: python3 pid: 5010 cpu: 4.5% 2: mem: 72.5 MiB (1.9%) command: dockerd pid: 702 cpu: 0.2% 3: mem: 59.7 MiB (1.5%) command: python3 pid: 1930 cpu: 0.4% 4: mem: 44.9 MiB (1.1%) command: docker pid: 1452 cpu: 0.0% 5: mem: 36.2 MiB (0.9%) command: containerd pid: 567 cpu: 0.0% Info: Processes: 312 Uptime: 1h 30m Init: systemd v: 247 runlevel: 3 target: multi-user.target tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Shell: Bash (sudo) v: 5.1.4 running-in: pty pts/1 inxi: 3.3.12

inxi Results

System:
  Host: rpi4ha Kernel: 5.10.92-v8+ aarch64 bits: 64 compiler: N/A parameters: coherent_pool=1M
    8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1
    bcm2708_fb.fbwidth=1024 bcm2708_fb.fbheight=600 bcm2708_fb.fbswap=1
    smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000
    console=ttyS0,115200 console=tty1 root=PARTUUID=6596edc7-02 rootfstype=ext4 fsck.repair=yes
    rootwait lsm=apparmor apparmor=1 security=apparmor
  Console: pty pts/1 Distro: Raspberry Pi OS base: Debian GNU/Linux 11 (bullseye)
Machine:
  Type: ARM System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2835 rev: c03114
    Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 3.78 GiB used: 816.1 MiB (21.1%) gpu: 76 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0
    stepping: 3
  Topology: cpus: 1x cores: 4 smt: N/A cache: N/A
  Speed (MHz): avg: 1800 min/max: 600/1800 scaling: driver: cpufreq-dt governor: ondemand
    cores: 1: 1800 2: 1800 3: 1800 4: 1800 bogomips: 432
  Features: asimd cpuid crc32 evtstrm fp
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 status: Vulnerable
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc class-ID: fb
  Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
  Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
  Display: server: X.org 1.20.11 driver: loaded: fbdev unloaded: modesetting tty: 128x37
  Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:
  Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio
    class-ID: bcm2835_audio
  Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
  Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
  Sound Server-1: ALSA v: k5.10.92-v8+ running: yes
Network:
  Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000
    class-ID: mmcnr
  IF: wlan0 state: down mac: XX:XX:XX:XX:XX:XX
  Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A
    chip-ID: brcm:fd580000 class-ID: ethernet
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IP v4: 172.17.X.X/24 type: dynamic noprefixroute scope: global broadcast: 172.17.X.X
  IP v6: fe80::8424:d013:a8a6:2771/64 type: noprefixroute scope: link
  IF-ID-1: docker0 state: up speed: 10000 Mbps duplex: unknown mac: XX:XX:XX:XX:XX:XX
  IP v4: 172.18.X.X/16 scope: global broadcast: 172.18.X.X
  IP v6: fe80::42:47ff:fecf:5bc1/64 scope: link
  IF-ID-2: hassio state: up speed: 10000 Mbps duplex: unknown mac: XX:XX:XX:XX:XX:XX
  IP v4: 172.30.X.X/23 scope: global broadcast: 172.30.X.X
  IP v6: fe80::42:96ff:fe22:96b/64 scope: link
  IF-ID-3: veth0b8d885 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IF-ID-4: veth29d10ba state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IF-ID-5: veth415d068 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IF-ID-6: veth4b9b15d state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IF-ID-7: veth7548d58 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IF-ID-8: veth9b3868d state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IF-ID-9: vethcf17845 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IF-ID-10: vethd22d1e0 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  WAN IP: 58.84.X.X
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address: XX:XX:XX:XX:XX:XX bt-v: 3.0
    lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept
    service-classes: rendering, capturing, audio
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 1.85 TiB used: 24.48 GiB (1.3%)
  ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: SanDisk model: SU32G size: 29.72 GiB block-size:
    physical: 512 B logical: 512 B type: SSD scheme: MBR
  SMART Message: Unknown smartctl error. Unable to generate data.
  ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Samsung model: SSD 870 QVO size: 1.82 TiB
    block-size: physical: 512 B logical: 512 B type: SSD rev: SVQ0 scheme: GPT
  SMART Message: A mandatory SMART command failed. Various possible causes.
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 29.47 GiB size: 28.98 GiB (98.34%) used: 7.84 GiB (27.1%) fs: ext4
    block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs
    uuid: 1943b829-a99b-45b8-9fe5-7136dbea4c4a
  ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 29.8 MiB (11.8%) fs: vfat
    block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: F914-FF4D
  ID-3: /mnt raw-size: 1.82 TiB size: 1.79 TiB (98.37%) used: 16.61 GiB (0.9%) fs: ext4
    block-size: 4096 B dev: /dev/sda1 maj-min: 8:1 label: N/A
    uuid: 6b66ffa2-7cc8-493b-9fe6-b56233aaa7e3
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
  ID-1: swap-1 type: file size: 100 MiB used: 768 KiB (0.8%) priority: -2 file: /var/swap
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA
    chip-ID: 2109:3431 class-ID: 0900
  Device-1: 1-1.2:3 info: STMicro LED badge -- mini LED display -- 11x44 type: HID
    driver: hid-multitouch,usbhid interfaces: 1 rev: 0.0 speed: 12 Mb/s power: 64mA
    chip-ID: 0483:5750 class-ID: 0300 MPI7003അЉơƅ∉ʡ䈉
  Device-2: 1-1.4:4 info: Dell KB212-B Quiet Key Keyboard type: Keyboard
    driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s power: 100mA
    chip-ID: 413c:2107 class-ID: 0301
  Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003
    class-ID: 0900
  Device-1: 2-1:2 info: VIA Labs VL711 SATA 6Gb/s bridge type: Mass Storage driver: usb-storage
    interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 896mA chip-ID: 2109:0711 class-ID: 0806
    Sensors:
  Missing: Required tool sensors not installed. Check --recommends
Repos:
  Packages: apt: 934 lib: 452
  Active apt repos in: /etc/apt/sources.list
    1: deb http://deb.debian.org/debian bullseye main contrib non-free
    2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
    3: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/docker.list
    1: deb [arch=arm64 signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https://download.docker.com/linux/debian bullseye stable
  Active apt repos in: /etc/apt/sources.list.d/raspi.list
    1: deb http://archive.raspberrypi.org/debian/ bullseye main
Processes:
  CPU top: 5 of 312
  1: cpu: 4.5% command: python3 pid: 5010 mem: 292.7 MiB (7.7%)
  2: cpu: 1.1% command: pulseaudio pid: 4014 mem: 9.62 MiB (0.2%)
  3: cpu: 1.0% command: top pid: 9897 mem: 3.60 MiB (0.0%)
  4: cpu: 0.6% command: [usb-storage] pid: 5570 mem: 0.00 MiB (0.0%)
  5: cpu: 0.4% command: python3 pid: 1930 mem: 59.7 MiB (1.5%)
  Memory top: 5 of 312
  1: mem: 292.7 MiB (7.7%) command: python3 pid: 5010 cpu: 4.5%
  2: mem: 72.5 MiB (1.9%) command: dockerd pid: 702 cpu: 0.2%
  3: mem: 59.7 MiB (1.5%) command: python3 pid: 1930 cpu: 0.4%
  4: mem: 44.9 MiB (1.1%) command: docker pid: 1452 cpu: 0.0%
  5: mem: 36.2 MiB (0.9%) command: containerd pid: 567 cpu: 0.0%
Info:
  Processes: 312 Uptime: 1h 30m Init: systemd v: 247 runlevel: 3 target: multi-user.target
  tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Shell: Bash (sudo) v: 5.1.4
  running-in: pty pts/1 inxi: 3.3.12

Benchmark #57112 - Brand: Samsung 870 QVO