Benchmark #57171 - pibenchmarks.com

Brand: QEMU Virtual Hard Disk
Virtual
#74 / 1,679
255
#1,617 / 1,679
#0 / 94
#0 / 13
0
	Amazon.com

Overview
2022-02-21 18:17:04
#57,171
25,724
+25,724 (+100.00%)
Anonymous
hetzner cpx11 vserver

Storage Details
QEMU Virtual Hard Disk
Virtual
76.2G
USB Flash
QEMU
QEMUHARDDISK
None

System Board Details

Hetzner Virtual Server
vServer
Hetzner
AMD EPYC
3
2,000
N/A
N/A
4 GB

Operating System

Debian GNU/Linux 11 (bullseye)
x86_64

Benchmark Results
1126.4 MB/s
2023.09 MB/s
1677.19 MB/s
52,512 IOPS
76,992 IOPS
210,051 KB/s
307,969 KB/s
43,609 KB/s
53,100 KB/s
19,903 KB/s
40,997 KB/s

inxi Results
System: Kernel: 5.10.0-9-amd64 x86_64 bits: 64 compiler: gcc v: 10.2.1 parameters: BOOT_IMAGE=/boot/vmlinuz-5.10.0-9-amd64 root=UUID=19aa60c0-6631-4664-89b8-82f94b1dfa12 ro consoleblank=0 systemd.show_status=true console=tty1 console=ttyS0 Console: pty pts/0 Distro: Debian GNU/Linux 11 (bullseye) Machine: Type: Kvm System: Hetzner product: vServer v: 20171111 Chassis: QEMU type: 1 v: NotSpecified N/A Mobo: N/A model: N/A N/A BIOS: Hetzner v: 20171111 date: 11/11/2017 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.75 GiB used: 1.59 GiB (42.4%) Array-1: capacity: 3.91 GiB slots: 1 EC: Multi-bit ECC max-module-size: 3.91 GiB note: est. Device-1: DIMM 0 size: 3.91 GiB speed: N/A type: RAM detail: other bus-width: Unknown total: Unknown manufacturer: QEMU part-no: N/A N/A PCI Slots: Message: No PCI Slot data found. CPU: Info: model: AMD EPYC bits: 64 type: MCP arch: Zen 2 family: 0x17 (23) model-id: 0x31 (49) stepping: 0 microcode: 0x1000065 Topology: cpus: 1x cores: 3 smt: cache: L1: 192 KiB desc: d-3x32 KiB! i-3x32 KiB L2: 1.5 MiB desc: 3x512 KiB L3: 16 MiB desc: 1x16 MiB Speed (MHz): avg: 2445 min/max: N/A base/boost: 2000/2000 cores: 1: 2445 2: 2445 3: 2445 bogomips: 14672 Flags: 3dnowprefetch abm adx aes apic arat arch_capabilities avx avx2 bmi1 bmi2 clflush clflushopt clwb clzero cmov cmp_legacy cpuid cr8_legacy cx16 cx8 de extd_apicid f16c fma fpu fsgsbase fxsr fxsr_opt ht hypervisor ibpb ibrs lahf_lm lm mca mce misalignsse mmx mmxext movbe msr mtrr nopl nx osvw pae pat pclmulqdq pdpe1gb perfctr_core pge pni popcnt pse pse36 rdpid rdrand rdseed rdtscp rep_good sep sha_ni smap smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 stibp syscall topoext tsc tsc_known_freq umip vme vmmcall wbnoinvd x2apic xgetbv1 xsave xsavec xsaveerptr xsaveopt xsaves Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl and seccomp Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization Type: spectre_v2 mitigation: Full AMD retpoline, IBPB: conditional, IBRS_FW, STIBP: disabled, RSB filling Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: Red Hat Virtio GPU driver: virtio-pci v: 1 alternate: virtio_pci bus-ID: 00:01.0 chip-ID: 1af4:1050 class-ID: 0300 Display: server: No display server data found. Headless machine? tty: 80x40 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Message: No device data found. Network: Device-1: Red Hat Virtio network driver: virtio-pci v: 1 modules: virtio_pci port: N/A bus-ID: 01:00.0 chip-ID: 1af4:1041 class-ID: 0200 IF-ID-1: br-9d70c48c7d5a state: down mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: br-mailcow state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: global IP v6: scope: link IP v6: scope: link IF-ID-3: docker0 state: down mac: IP v4: scope: global broadcast: IF-ID-4: eth0 state: up speed: -1 duplex: unknown mac: IP v4: type: dynamic scope: global broadcast: IP v6: scope: global IP v6: scope: link IF-ID-5: veth006f584 state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: veth34ded1d state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: veth55dc716 state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: veth81e7498 state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: vethbc0c5d6 state: up speed: 10000 Mbps duplex: full mac: IF-ID-10: vethd3de175 state: up speed: 10000 Mbps duplex: full mac: IF-ID-11: vethedef993 state: up speed: 10000 Mbps duplex: full mac: WAN IP: Bluetooth: Message: No bluetooth data found. Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 76.3 GiB used: 15.33 GiB (20.1%) ID-1: /dev/sda maj-min: 8:0 vendor: QEMU model: HARDDISK size: 76.3 GiB block-size: physical: 512 B logical: 512 B speed: type: SSD rev: 2.5+ scheme: GPT SMART: no Optical-1: /dev/sr0 vendor: QEMU model: QEMU DVD-ROM rev: 2.5+ dev-links: cdrom,dvd Features: speed: 4 multisession: yes audio: yes dvd: yes rw: none state: running Partition: ID-1: / raw-size: 76.18 GiB size: 76.05 GiB (99.84%) used: 15.33 GiB (20.2%) fs: ext4 block-size: 4096 B dev: /dev/sda1 maj-min: 8:1 label: N/A uuid: 19aa60c0-6631-4664-89b8-82f94b1dfa12 ID-2: /boot/efi raw-size: 122 MiB size: 120.1 MiB (98.43%) used: 138 KiB (0.1%) fs: vfat block-size: 512 B dev: /dev/sda15 maj-min: 8:15 label: N/A uuid: 77A7-BFFA Swap: Alert: No swap data was found. Unmounted: ID-1: /dev/sda14 maj-min: 8:14 size: 1024 KiB fs: N/A label: N/A uuid: N/A USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Device-1: 1-1:2 info: Adomax QEMU USB Tablet type: HID driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 100mA chip-ID: 0627:0001 class-ID: 0300 Hub-2: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: note: see --pkg apt: 705 lib: 339 Active apt repos in: /etc/apt/sources.list 1: deb http: //deb.debian.org/debian bullseye main contrib non-free 2: deb http: //deb.debian.org/debian bullseye-updates main contrib non-free 3: deb http: //deb.debian.org/debian bullseye-backports main contrib non-free 4: deb http: //security.debian.org/debian-security bullseye-security main contrib non-free 5: deb http: //ppa.launchpad.net/webupd8team/java/ubuntu xenial main Active apt repos in: /etc/apt/sources.list.d/caddy-stable.list 1: deb https: //dl.cloudsmith.io/public/caddy/stable/deb/debian any-version main 2: deb-src https: //dl.cloudsmith.io/public/caddy/stable/deb/debian any-version main Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=amd64 signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https: //download.docker.com/linux/debian bullseye stable Active apt repos in: /etc/apt/sources.list.d/hetzner-mirror.list 1: deb http: //mirror.hetzner.com/debian/packages bullseye main contrib non-free 2: deb http: //mirror.hetzner.com/debian/packages bullseye-updates main contrib non-free 3: deb http: //mirror.hetzner.com/debian/packages bullseye-backports main contrib non-free Active apt repos in: /etc/apt/sources.list.d/hetzner-security-updates.list 1: deb http: //mirror.hetzner.com/debian/security bullseye-security main contrib non-free Active apt repos in: /etc/apt/sources.list.d/jenkins.list 1: deb [signed-by=/usr/share/keyrings/jenkins-keyring.asc] https: //pkg.jenkins.io/debian binary/ Processes: CPU top: 5 of 235 1: cpu: 0.6% command: intezer-protect pid: 711 mem: 42.9 MiB (1.1%) 2: cpu: 0.1% command: containerd pid: 729 mem: 28.5 MiB (0.7%) 3: cpu: 0.1% command: sshd: pid: 1206139 mem: 5.32 MiB (0.1%) 4: cpu: 0.1% command: bash pid: 1206147 mem: 2.79 MiB (0.0%) 5: cpu: 0.1% command: redis-server pid: 3501239 mem: 20.2 MiB (0.5%) Memory top: 5 of 235 1: mem: 167.7 MiB (4.3%) command: mariadbd pid: 812 cpu: 0.0% 2: mem: 103.9 MiB (2.7%) command: systemd-journald pid: 357 cpu: 0.0% 3: mem: 95.2 MiB (2.4%) command: perl pid: 3518382 cpu: 0.0% 4: mem: 91.2 MiB (2.3%) command: spamd pid: 3518389 cpu: 0.0% 5: mem: 91.2 MiB (2.3%) command: spamd pid: 3518390 cpu: 0.0% Info: Processes: 235 Uptime: 43d 22h 49m wakeups: 5653 Init: systemd v: 247 runlevel: 5 tool: systemctl Compilers: gcc: N/A Client: shell wrapper v: 5.1.4-release inxi: 3.3.12

inxi Results

System:
  Kernel: 5.10.0-9-amd64 x86_64 bits: 64 compiler: gcc v: 10.2.1
    parameters: BOOT_IMAGE=/boot/vmlinuz-5.10.0-9-amd64
    root=UUID=19aa60c0-6631-4664-89b8-82f94b1dfa12 ro consoleblank=0 systemd.show_status=true
    console=tty1 console=ttyS0
  Console: pty pts/0 Distro: Debian GNU/Linux 11 (bullseye)
Machine:
  Type: Kvm System: Hetzner product: vServer v: 20171111 Chassis: QEMU type: 1
    v: NotSpecified N/A
  Mobo: N/A model: N/A N/A BIOS: Hetzner v: 20171111 date: 11/11/2017
Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 3.75 GiB used: 1.59 GiB (42.4%)
  Array-1: capacity: 3.91 GiB slots: 1 EC: Multi-bit ECC max-module-size: 3.91 GiB note: est.
  Device-1: DIMM 0 size: 3.91 GiB speed: N/A type: RAM detail: other bus-width: Unknown
    total: Unknown manufacturer: QEMU part-no: N/A N/A
PCI Slots:
  Message: No PCI Slot data found.
CPU:
  Info: model: AMD EPYC bits: 64 type: MCP arch: Zen 2 family: 0x17 (23) model-id: 0x31 (49)
    stepping: 0 microcode: 0x1000065
  Topology: cpus: 1x cores: 3 smt:  cache: L1: 192 KiB desc: d-3x32 KiB! i-3x32 KiB
    L2: 1.5 MiB desc: 3x512 KiB L3: 16 MiB desc: 1x16 MiB
  Speed (MHz): avg: 2445 min/max: N/A base/boost: 2000/2000 cores: 1: 2445 2: 2445 3: 2445
    bogomips: 14672
  Flags: 3dnowprefetch abm adx aes apic arat arch_capabilities avx avx2 bmi1 bmi2 clflush
    clflushopt clwb clzero cmov cmp_legacy cpuid cr8_legacy cx16 cx8 de extd_apicid f16c fma fpu
    fsgsbase fxsr fxsr_opt ht hypervisor ibpb ibrs lahf_lm lm mca mce misalignsse mmx mmxext movbe
    msr mtrr nopl nx osvw pae pat pclmulqdq pdpe1gb perfctr_core pge pni popcnt pse pse36 rdpid
    rdrand rdseed rdtscp rep_good sep sha_ni smap smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3
    stibp syscall topoext tsc tsc_known_freq umip vme vmmcall wbnoinvd x2apic xgetbv1 xsave xsavec
    xsaveerptr xsaveopt xsaves
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl and seccomp
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2
    mitigation: Full AMD retpoline, IBPB: conditional, IBRS_FW, STIBP: disabled, RSB filling
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Red Hat Virtio GPU driver: virtio-pci v: 1 alternate: virtio_pci bus-ID: 00:01.0
    chip-ID: 1af4:1050 class-ID: 0300
  Display: server: No display server data found. Headless machine? tty: 80x40
  Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:
  Message: No device data found.
Network:
  Device-1: Red Hat Virtio network driver: virtio-pci v: 1 modules: virtio_pci port: N/A
    bus-ID: 01:00.0 chip-ID: 1af4:1041 class-ID: 0200
  IF-ID-1: br-9d70c48c7d5a state: down mac: 
  IP v4:  scope: global broadcast: 
  IP v6:  scope: link
  IF-ID-2: br-mailcow state: up speed: 10000 Mbps duplex: unknown mac: 
  IP v4:  scope: global broadcast: 
  IP v6:  scope: global
  IP v6:  scope: link
  IP v6:  scope: link
  IF-ID-3: docker0 state: down mac: 
  IP v4:  scope: global broadcast: 
  IF-ID-4: eth0 state: up speed: -1 duplex: unknown mac: 
  IP v4:  type: dynamic scope: global broadcast: 
  IP v6:  scope: global
  IP v6:  scope: link
  IF-ID-5: veth006f584 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-6: veth34ded1d state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-7: veth55dc716 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-8: veth81e7498 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-9: vethbc0c5d6 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-10: vethd3de175 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-11: vethedef993 state: up speed: 10000 Mbps duplex: full mac: 
  WAN IP: 
Bluetooth:
  Message: No bluetooth data found.
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 76.3 GiB used: 15.33 GiB (20.1%)
  ID-1: /dev/sda maj-min: 8:0 vendor: QEMU model: HARDDISK size: 76.3 GiB block-size:
    physical: 512 B logical: 512 B speed:  type: SSD rev: 2.5+ scheme: GPT
  SMART: no
  Optical-1: /dev/sr0 vendor: QEMU model: QEMU DVD-ROM rev: 2.5+ dev-links: cdrom,dvd
  Features: speed: 4 multisession: yes audio: yes dvd: yes rw: none state: running
Partition:
  ID-1: / raw-size: 76.18 GiB size: 76.05 GiB (99.84%) used: 15.33 GiB (20.2%) fs: ext4
    block-size: 4096 B dev: /dev/sda1 maj-min: 8:1 label: N/A
    uuid: 19aa60c0-6631-4664-89b8-82f94b1dfa12
  ID-2: /boot/efi raw-size: 122 MiB size: 120.1 MiB (98.43%) used: 138 KiB (0.1%) fs: vfat
    block-size: 512 B dev: /dev/sda15 maj-min: 8:15 label: N/A uuid: 77A7-BFFA
Swap:
  Alert: No swap data was found.
Unmounted:
  ID-1: /dev/sda14 maj-min: 8:14 size: 1024 KiB fs: N/A label: N/A uuid: N/A
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Device-1: 1-1:2 info: Adomax QEMU USB Tablet type: HID driver: hid-generic,usbhid
    interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 100mA chip-ID: 0627:0001 class-ID: 0300
    Hub-2: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003
    class-ID: 0900
Sensors:
  Missing: Required tool sensors not installed. Check --recommends
Repos:
  Packages: note: see --pkg apt: 705 lib: 339
  Active apt repos in: /etc/apt/sources.list
    1: deb http: //deb.debian.org/debian bullseye main contrib non-free
    2: deb http: //deb.debian.org/debian bullseye-updates main contrib non-free
    3: deb http: //deb.debian.org/debian bullseye-backports main contrib non-free
    4: deb http: //security.debian.org/debian-security bullseye-security main contrib non-free
    5: deb http: //ppa.launchpad.net/webupd8team/java/ubuntu xenial main
  Active apt repos in: /etc/apt/sources.list.d/caddy-stable.list
    1: deb https: //dl.cloudsmith.io/public/caddy/stable/deb/debian any-version main
    2: deb-src https: //dl.cloudsmith.io/public/caddy/stable/deb/debian any-version main
  Active apt repos in: /etc/apt/sources.list.d/docker.list
    1: deb [arch=amd64 signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https: //download.docker.com/linux/debian bullseye stable
  Active apt repos in: /etc/apt/sources.list.d/hetzner-mirror.list
    1: deb http: //mirror.hetzner.com/debian/packages bullseye main contrib non-free
    2: deb http: //mirror.hetzner.com/debian/packages bullseye-updates main contrib non-free
    3: deb http: //mirror.hetzner.com/debian/packages bullseye-backports main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/hetzner-security-updates.list
    1: deb http: //mirror.hetzner.com/debian/security bullseye-security main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/jenkins.list
    1: deb [signed-by=/usr/share/keyrings/jenkins-keyring.asc] https: //pkg.jenkins.io/debian binary/
Processes:
  CPU top: 5 of 235
  1: cpu: 0.6% command: intezer-protect pid: 711 mem: 42.9 MiB (1.1%)
  2: cpu: 0.1% command: containerd pid: 729 mem: 28.5 MiB (0.7%)
  3: cpu: 0.1% command: sshd: pid: 1206139 mem: 5.32 MiB (0.1%)
  4: cpu: 0.1% command: bash pid: 1206147 mem: 2.79 MiB (0.0%)
  5: cpu: 0.1% command: redis-server pid: 3501239 mem: 20.2 MiB (0.5%)
  Memory top: 5 of 235
  1: mem: 167.7 MiB (4.3%) command: mariadbd pid: 812 cpu: 0.0%
  2: mem: 103.9 MiB (2.7%) command: systemd-journald pid: 357 cpu: 0.0%
  3: mem: 95.2 MiB (2.4%) command: perl pid: 3518382 cpu: 0.0%
  4: mem: 91.2 MiB (2.3%) command: spamd pid: 3518389 cpu: 0.0%
  5: mem: 91.2 MiB (2.3%) command: spamd pid: 3518390 cpu: 0.0%
Info:
  Processes: 235 Uptime: 43d 22h 49m wakeups: 5653 Init: systemd v: 247 runlevel: 5
  tool: systemctl Compilers: gcc: N/A Client: shell wrapper v: 5.1.4-release inxi: 3.3.12

Benchmark #57171 - Brand: QEMU Virtual Hard Disk