Benchmark #57438 - pibenchmarks.com

Brand: PNY SD Premier-X (SD32G)
A1 C10 V10 U1
#68 / 1,539
157
#1,195 / 1,539
#185 / 369
1,141
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2022-02-27 12:43:23
#57,438
888
-253 (-28.49%)
Anonymous
lsusb -l

Secure Digital (SD) Card Details
PNY SD Premier-X (SD32G)
A1 C10 V10 U1
28.6G
SD
PNY
SD32G
SD
6.00
0x27
PH
6.0
09/2021
Class 10
A1
U1
V10

System Board Details
		Amazon.com AliExpress
Raspberry Pi 400 1.1
Raspberry Pi 400 Rev 1.1
Raspberry Pi Foundation
ARMv7 v7l
4
1,800
500
4 GB
1,600
50

Operating System

Raspbian GNU/Linux 11 (bullseye)
armv7l

Benchmark Results
21.7 MB/s
41.44 MB/s
41.54 MB/s
594 IOPS
1,929 IOPS
2,378 KB/s
7,719 KB/s
7,630 KB/s
2,076 KB/s
5,418 KB/s
2,232 KB/s

inxi Results
perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LC_TERMINAL = "iTerm2", LC_CTYPE = "UTF-8", LANG = "es_AR.UTF-8" are supported and installed on your system. perl: warning: Falling back to a fallback locale ("es_AR.UTF-8"). System: Kernel: 5.10.63-v7l+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=31efc1e5-02 rootfstype=ext4 fsck.repair=yes rootwait Console: N/A Distro: Raspbian GNU/Linux 11 (bullseye) Machine: Type: ARM System: Raspberry Pi 400 Rev 1.1 details: BCM2711 rev: c03131 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.82 GiB used: 794.8 MiB (20.3%) gpu: 76 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 3 Topology: cpus: 1x cores: 4 smt: N/A cache: N/A Speed (MHz): avg: 1800 min/max: 600/1800 scaling: driver: cpufreq-dt governor: ondemand cores: 1: 1800 2: 1800 3: 1800 4: 1800 bogomips: 1296 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: No display server data found. Headless machine? tty: 80x40 Message: Unable to show GL data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Sound Server-1: ALSA v: k5.10.63-v7l+ running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: down mac: Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-1: br-3cf909deae10 state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: br-45c5f1345190 state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-3: br-bea6da058f3f state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-4: docker0 state: down mac: IP v4: scope: global broadcast: IF-ID-5: veth1752f0d state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: veth181fae0 state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: veth194dafd state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: veth22d352a state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: veth2381e47 state: up speed: 10000 Mbps duplex: full mac: IF-ID-10: veth79af0dd state: up speed: 10000 Mbps duplex: full mac: IF-ID-11: vethb17da6e state: up speed: 10000 Mbps duplex: full mac: IF-ID-12: vethcb9c635 state: up speed: 10000 Mbps duplex: full mac: IF-ID-13: vethe50bd1a state: up speed: 10000 Mbps duplex: full mac: IF-ID-14: vethf5c3da0 state: up speed: 10000 Mbps duplex: full mac: IF-ID-15: vethfa31986 state: up speed: 10000 Mbps duplex: full mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: bt-v: 3.0 lmp-v: 5.0 sub-v: 6606 hci-v: 5.0 rev: 36 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 1.85 TiB used: 1.36 TiB (73.4%) ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: SanDisk model: SD32G size: 28.82 GiB block-size: physical: 512 B logical: 512 B type: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Toshiba model: External USB 3.0 drive model: MQ01ABB200 family: 2.5" HDD MQ01ABB... size: 1.82 TiB block-size: physical: 4096 B logical: 512 B sata: 2.6 speed: 3.0 Gb/s type: HDD rpm: 5400 rev: 0001 drive rev: AY000U temp: 36 C scheme: MBR SMART: yes state: enabled health: PASSED on: 1y 264d 9h cycles: 705 Old-Age: g-sense error rate: 123529 Message: No optical or floppy data found. Partition: ID-1: / raw-size: 28.56 GiB size: 28.1 GiB (98.37%) used: 7.92 GiB (28.2%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs uuid: 568caafd-bab1-46cb-921b-cd257b61f505 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 49.2 MiB (19.5%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: C839-E506 ID-3: /mnt/este raw-size: 971.02 GiB size: 971.02 GiB (100.00%) used: 686.56 GiB (70.7%) fs: ntfs block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: este uuid: 46DE7D4CDE7D3571 ID-4: /mnt/toshiba raw-size: 891.99 GiB size: 891.99 GiB (100.00%) used: 694.73 GiB (77.9%) fs: ntfs block-size: 4096 B dev: /dev/sda1 maj-min: 8:1 label: TOSHIBA EXT uuid: 2858227358223FC4 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Device-1: 1-1.1:3 info: Toshiba America External Disk 1.5TB type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 500mA chip-ID: 0480:a006 class-ID: 0806 Device-2: 1-1.4:4 info: Holtek Raspberry Pi Internal Keyboard type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s power: 100mA chip-ID: 04d9:0007 class-ID: 0300 Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 626 lib: 323 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/debian bullseye stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ bullseye main Processes: CPU top: 5 of 246 1: cpu: 14.5% command: grafana-cli pid: 11281 mem: 30.4 MiB (0.7%) 2: cpu: 7.7% command: duplicati.server.exe started by: mono-sgen pid: 30102 mem: 110.0 MiB (2.8%) 3: cpu: 4.9% command: dockerd pid: 565 mem: 66.8 MiB (1.7%) 4: cpu: 3.3% command: sda1 started by: mount.ntfs pid: 767 mem: 2.65 MiB (0.0%) 5: cpu: 2.3% command: blackbox_exporter pid: 2257 mem: 23.0 MiB (0.6%) Memory top: 5 of 246 1: mem: 148.6 MiB (3.8%) command: prometheus pid: 4450 cpu: 1.1% 2: mem: 146.6 MiB (3.8%) command: systemd-journald pid: 132 cpu: 0.5% 3: mem: 115.1 MiB (2.9%) command: python3 pid: 2806 cpu: 1.9% 4: mem: 110.0 MiB (2.8%) command: duplicati.server.exe started by: mono-sgen pid: 30102 cpu: 7.7% 5: mem: 74.8 MiB (1.9%) command: node-red pid: 4502 cpu: 0.1% Info: Processes: 246 Uptime: 2h 16m Init: systemd v: 247 runlevel: 5 tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.13

inxi Results

perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
	LANGUAGE = (unset),
	LC_ALL = (unset),
	LC_TERMINAL = "iTerm2",
	LC_CTYPE = "UTF-8",
	LANG = "es_AR.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("es_AR.UTF-8").
System:
  Kernel: 5.10.63-v7l+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0
    snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX
    vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1
    root=PARTUUID=31efc1e5-02 rootfstype=ext4 fsck.repair=yes rootwait
  Console: N/A Distro: Raspbian GNU/Linux 11 (bullseye)
Machine:
  Type: ARM System: Raspberry Pi 400 Rev 1.1 details: BCM2711 rev: c03131 Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 3.82 GiB used: 794.8 MiB (20.3%) gpu: 76 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: 0
    stepping: 3
  Topology: cpus: 1x cores: 4 smt: N/A cache: N/A
  Speed (MHz): avg: 1800 min/max: 600/1800 scaling: driver: cpufreq-dt governor: ondemand cores:
    1: 1800 2: 1800 3: 1800 4: 1800 bogomips: 1296
  Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4
  Vulnerabilities: No CPU vulnerability/bugs data available.
Graphics:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700
    class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700
    class-ID: hdmi
  Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu
  Display: server: No display server data found. Headless machine? tty: 80x40
  Message: Unable to show GL data. Required tool glxinfo missing.
Audio:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi
  Device-3: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio
    class-ID: bcm2835_audio
  Sound Server-1: ALSA v: k5.10.63-v7l+ running: yes
Network:
  Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000
    class-ID: mmcnr
  IF: wlan0 state: down mac: 
  Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A
    chip-ID: brcm:fd580000 class-ID: ethernet
  IF: eth0 state: up speed: 100 Mbps duplex: full mac: 
  IP v4:  type: dynamic noprefixroute scope: global broadcast: 
  IP v6:  scope: link
  IF-ID-1: br-3cf909deae10 state: up speed: 10000 Mbps duplex: unknown mac: 
  IP v4:  scope: global broadcast: 
  IP v6:  scope: link
  IF-ID-2: br-45c5f1345190 state: up speed: 10000 Mbps duplex: unknown mac: 
  IP v4:  scope: global broadcast: 
  IP v6:  scope: link
  IF-ID-3: br-bea6da058f3f state: up speed: 10000 Mbps duplex: unknown mac: 
  IP v4:  scope: global broadcast: 
  IP v6:  scope: link
  IF-ID-4: docker0 state: down mac: 
  IP v4:  scope: global broadcast: 
  IF-ID-5: veth1752f0d state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-6: veth181fae0 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-7: veth194dafd state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-8: veth22d352a state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-9: veth2381e47 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-10: veth79af0dd state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-11: vethb17da6e state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-12: vethcb9c635 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-13: vethe50bd1a state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-14: vethf5c3da0 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-15: vethfa31986 state: up speed: 10000 Mbps duplex: full mac: 
  WAN IP: 
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address:  bt-v: 3.0 lmp-v: 5.0
    sub-v: 6606 hci-v: 5.0 rev: 36
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 1.85 TiB used: 1.36 TiB (73.4%)
  ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: SanDisk model: SD32G size: 28.82 GiB block-size:
    physical: 512 B logical: 512 B type: SSD scheme: MBR
  SMART Message: Unknown smartctl error. Unable to generate data.
  ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Toshiba model: External USB 3.0
    drive model: MQ01ABB200 family: 2.5" HDD MQ01ABB... size: 1.82 TiB block-size: physical: 4096 B
    logical: 512 B sata: 2.6 speed: 3.0 Gb/s type: HDD rpm: 5400 rev: 0001 drive rev: AY000U temp: 36 C scheme: MBR
  SMART: yes state: enabled health: PASSED on: 1y 264d 9h cycles: 705 Old-Age:
    g-sense error rate: 123529
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 28.56 GiB size: 28.1 GiB (98.37%) used: 7.92 GiB (28.2%) fs: ext4
    block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs
    uuid: 568caafd-bab1-46cb-921b-cd257b61f505
  ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 49.2 MiB (19.5%) fs: vfat
    block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: C839-E506
  ID-3: /mnt/este raw-size: 971.02 GiB size: 971.02 GiB (100.00%) used: 686.56 GiB (70.7%)
    fs: ntfs block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: este uuid: 46DE7D4CDE7D3571
  ID-4: /mnt/toshiba raw-size: 891.99 GiB size: 891.99 GiB (100.00%) used: 694.73 GiB (77.9%)
    fs: ntfs block-size: 4096 B dev: /dev/sda1 maj-min: 8:1 label: TOSHIBA EXT
    uuid: 2858227358223FC4
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
  ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA
    chip-ID: 2109:3431 class-ID: 0900
  Device-1: 1-1.1:3 info: Toshiba America External Disk 1.5TB type: Mass Storage
    driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 500mA chip-ID: 0480:a006
    class-ID: 0806 Device-2: 1-1.4:4 info: Holtek Raspberry Pi Internal Keyboard type: Keyboard,HID
    driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s power: 100mA
    chip-ID: 04d9:0007 class-ID: 0300
  Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003
    class-ID: 0900
Sensors:
  Missing: Required tool sensors not installed. Check --recommends
Repos:
  Packages: apt: 626 lib: 323
  Active apt repos in: /etc/apt/sources.list
    1: deb http: //raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-free rpi
  Active apt repos in: /etc/apt/sources.list.d/docker.list
    1: deb [arch=armhf] https: //download.docker.com/linux/debian bullseye stable
  Active apt repos in: /etc/apt/sources.list.d/raspi.list
    1: deb http: //archive.raspberrypi.org/debian/ bullseye main
Processes:
  CPU top: 5 of 246
  1: cpu: 14.5% command: grafana-cli pid: 11281 mem: 30.4 MiB (0.7%)
  2: cpu: 7.7% command: duplicati.server.exe started by: mono-sgen pid: 30102
    mem: 110.0 MiB (2.8%)
  3: cpu: 4.9% command: dockerd pid: 565 mem: 66.8 MiB (1.7%)
  4: cpu: 3.3% command: sda1 started by: mount.ntfs pid: 767 mem: 2.65 MiB (0.0%)
  5: cpu: 2.3% command: blackbox_exporter pid: 2257 mem: 23.0 MiB (0.6%)
  Memory top: 5 of 246
  1: mem: 148.6 MiB (3.8%) command: prometheus pid: 4450 cpu: 1.1%
  2: mem: 146.6 MiB (3.8%) command: systemd-journald pid: 132 cpu: 0.5%
  3: mem: 115.1 MiB (2.9%) command: python3 pid: 2806 cpu: 1.9%
  4: mem: 110.0 MiB (2.8%) command: duplicati.server.exe started by: mono-sgen pid: 30102
    cpu: 7.7%
  5: mem: 74.8 MiB (1.9%) command: node-red pid: 4502 cpu: 0.1%
Info:
  Processes: 246 Uptime: 2h 16m Init: systemd v: 247 runlevel: 5 tool: systemctl Compilers:
  gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.13

Benchmark #57438 - Brand: PNY SD Premier-X (SD32G)