Benchmark #57454 - pibenchmarks.com

Brand: Kingston KC2000 M.2 Series
SSD (M.2 NVMe)
#1,321 / 1,672
1
#267 / 1,672
#265 / 983
#235 / 280
11,687
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2022-02-27 22:18:11
#57,454
11,687
0 (0.00%)
Ron
KINGSTON SKC2000M81000G 1TB NVMe enclosure : UGREEN CM400 (RTL9210) on lower USB3 port

Storage Details
Kingston KC2000 M.2 Series
SSD (M.2 NVMe)
923.1G
SSD
Kingston
SKC2000M81000G
3.20
5,000
0bda:9210
0x0bda (Realtek Semiconductor Corp.)
0x9210 (RTL9210 M.2 NVME Adapter)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
N/A
4
2,000 (+500)
500
8 GB
1,600

Operating System

Debian GNU/Linux 11 (bullseye)
aarch64

Benchmark Results
148 MB/s
344.5 MB/s
330.9 MB/s
26,089 IOPS
41,457 IOPS
104,356 KB/s
165,829 KB/s
42,196 KB/s
35,181 KB/s
23,964 KB/s
41,727 KB/s

inxi Results
System: Kernel: 5.10.0-11-arm64 aarch64 bits: 64 compiler: gcc v: 10.2.1 parameters: dma.dmachans=0x37f5 bcm2709.boardrev=0xd03114 bcm2709.serial=0x4f326727 bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=tty0 console=ttyS1,115200 root=LABEL=RASPIROOT rw fsck.repair=yes net.ifnames=0 rootwait ipv6.disable=1 zswap.enabled=1 zswap.compressor=lz4 zswap.zpool=z3fold zswap.max_pool_percent=25 Console: pty pts/1 DM: LightDM 1.26.0 Distro: Debian GNU/Linux 11 (bullseye) Machine: Type: ARM System: Raspberry Pi 4 Model B Rev 1.4 details: N/A Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 7.63 GiB used: 1.7 GiB (22.3%) RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 Topology: cpus: 1x cores: 4 smt: cache: N/A Speed (MHz): avg: 900 high: 1400 min/max: 600/2000 scaling: driver: cpufreq-dt governor: schedutil cores: 1: 1400 2: 1000 3: 600 4: 600 bogomips: 432 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: X.org v: 1.20.11 driver: X: loaded: modesetting unloaded: fbdev gpu: vc4_hdmi,vc4_hdmi,vc4_drm tty: 80x40 Message: Unable to show GL data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Sound Server-1: ALSA v: k5.10.0-11-arm64 running: yes Sound Server-2: PulseAudio v: 14.2 running: yes Sound Server-3: PipeWire v: 0.3.19 running: yes Network: Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: scope: global broadcast: Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq IF-ID-1: wg2 state: unknown speed: N/A duplex: N/A mac: N/A IP v4: scope: global IF-ID-2: wlan0 state: down mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: hardware: no software: no address: see --recommends Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial Report: This feature requires one of these tools: hciconfig/bt-adapter Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 931.51 GiB used: 19.05 GiB (2.0%) ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Kingston model: SKC2000M81000G size: 931.51 GiB block-size: physical: 512 B logical: 512 B type: N/A rev: 3101 temp: 34 Celsius C scheme: MBR SMART: yes health: PASSED on: 36 hrs cycles: 52 read-units: 163,337 [83.6 GB] written-units: 209,088 [107 GB] Message: No optical or floppy data found. Partition: ID-1: / raw-size: 923.12 GiB size: 909.14 GiB (98.49%) used: 18.97 GiB (2.1%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT uuid: fc66d92c-390f-4100-ad72-d00c070efae5 ID-2: /boot/firmware raw-size: 396 MiB size: 395.8 MiB (99.94%) used: 83.9 MiB (21.2%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: RASPIFIRM uuid: 79EB-F452 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: partition size: 8 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sda3 maj-min: 8:3 label: N/A uuid: 81c2bca1-003f-4829-b2cd-2f5419a6dc9a Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-2:2 info: Realtek RTL9210 M.2 NVME Adapter type: Mass Storage driver: uas interfaces: 1 rev: 3.2 speed: 5 Gb/s power: 896mA chip-ID: 0bda:9210 class-ID: 0806 Sensors: System Temperatures: cpu: 39.9 C mobo: N/A Fan Speeds (RPM): N/A Repos: Packages: apt: 1045 lib: 579 Active apt repos in: /etc/apt/sources.list 1: deb http: //deb.debian.org/debian bullseye main contrib non-free 2: deb http: //security.debian.org/debian-security bullseye-security main contrib non-free Processes: CPU top: 5 of 167 1: cpu: 0.6% command: init pid: 1 mem: 10.1 MiB (0.1%) 2: cpu: 0.4% command: mariadbd pid: 671 mem: 1232.9 MiB (15.7%) 3: cpu: 0.3% command: packagekitd pid: 1592 mem: 17.6 MiB (0.2%) 4: cpu: 0.2% command: [kworker/2:1-wg-crypt-wg2] pid: 1307 mem: 0.00 MiB (0.0%) 5: cpu: 0.1% command: [kworker/2:2-events] pid: 80 mem: 0.00 MiB (0.0%) Memory top: 5 of 167 1: mem: 1232.9 MiB (15.7%) command: mariadbd pid: 671 cpu: 0.4% 2: mem: 91.5 MiB (1.1%) command: lightdm-gtk-greeter pid: 810 cpu: 0.1% 3: mem: 59.0 MiB (0.7%) command: xorg pid: 591 cpu: 0.0% 4: mem: 31.8 MiB (0.4%) command: apache2 pid: 842 cpu: 0.0% 5: mem: 30.4 MiB (0.3%) command: php-fpm: pid: 529 cpu: 0.0% Info: Processes: 167 Uptime: 21m Init: systemd v: 247 runlevel: 5 tool: systemctl Compilers: gcc: N/A alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.13

inxi Results

System:
  Kernel: 5.10.0-11-arm64 aarch64 bits: 64 compiler: gcc v: 10.2.1 parameters:
    dma.dmachans=0x37f5 bcm2709.boardrev=0xd03114 bcm2709.serial=0x4f326727
    bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0
    smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000
    console=tty0 console=ttyS1,115200 root=LABEL=RASPIROOT rw fsck.repair=yes net.ifnames=0
    rootwait ipv6.disable=1 zswap.enabled=1 zswap.compressor=lz4 zswap.zpool=z3fold
    zswap.max_pool_percent=25
  Console: pty pts/1 DM: LightDM 1.26.0 Distro: Debian GNU/Linux 11 (bullseye)
Machine:
  Type: ARM System: Raspberry Pi 4 Model B Rev 1.4 details: N/A Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 7.63 GiB used: 1.7 GiB (22.3%)
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0
    stepping: 3
  Topology: cpus: 1x cores: 4 smt:  cache: N/A
  Speed (MHz): avg: 900 high: 1400 min/max: 600/2000 scaling: driver: cpufreq-dt
    governor: schedutil cores: 1: 1400 2: 1000 3: 600 4: 600 bogomips: 432
  Features: asimd cpuid crc32 evtstrm fp
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 status: Vulnerable
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700
    class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700
    class-ID: hdmi
  Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu
  Display: server: X.org v: 1.20.11 driver: X: loaded: modesetting unloaded: fbdev
    gpu: vc4_hdmi,vc4_hdmi,vc4_drm tty: 80x40
  Message: Unable to show GL data. Required tool glxinfo missing.
Audio:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi
  Sound Server-1: ALSA v: k5.10.0-11-arm64 running: yes
  Sound Server-2: PulseAudio v: 14.2 running: yes
  Sound Server-3: PipeWire v: 0.3.19 running: yes
Network:
  Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000
    class-ID: ethernet
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 
  IP v4:  scope: global broadcast: 
  Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A
    chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq
  IF-ID-1: wg2 state: unknown speed: N/A duplex: N/A mac: N/A
  IP v4:  scope: global
  IF-ID-2: wlan0 state: down mac: 
  WAN IP: 
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
  Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: hardware: no
    software: no address: see --recommends
  Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial
  Report: This feature requires one of these tools: hciconfig/bt-adapter
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 931.51 GiB used: 19.05 GiB (2.0%)
  ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Kingston model: SKC2000M81000G size: 931.51 GiB
    block-size: physical: 512 B logical: 512 B type: N/A rev: 3101 temp: 34 Celsius C scheme: MBR
  SMART: yes health: PASSED on: 36 hrs cycles: 52 read-units: 163,337 [83.6 GB]
    written-units: 209,088 [107 GB]
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 923.12 GiB size: 909.14 GiB (98.49%) used: 18.97 GiB (2.1%) fs: ext4
    block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT
    uuid: fc66d92c-390f-4100-ad72-d00c070efae5
  ID-2: /boot/firmware raw-size: 396 MiB size: 395.8 MiB (99.94%) used: 83.9 MiB (21.2%)
    fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: RASPIFIRM uuid: 79EB-F452
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
  ID-1: swap-1 type: partition size: 8 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sda3
    maj-min: 8:3 label: N/A uuid: 81c2bca1-003f-4829-b2cd-2f5419a6dc9a
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA
    chip-ID: 2109:3431 class-ID: 0900
  Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003
    class-ID: 0900
  Device-1: 2-2:2 info: Realtek RTL9210 M.2 NVME Adapter type: Mass Storage driver: uas
    interfaces: 1 rev: 3.2 speed: 5 Gb/s power: 896mA chip-ID: 0bda:9210 class-ID: 0806
    Sensors:
  System Temperatures: cpu: 39.9 C mobo: N/A
  Fan Speeds (RPM): N/A
Repos:
  Packages: apt: 1045 lib: 579
  Active apt repos in: /etc/apt/sources.list
    1: deb http: //deb.debian.org/debian bullseye main contrib non-free
    2: deb http: //security.debian.org/debian-security bullseye-security main contrib non-free
Processes:
  CPU top: 5 of 167
  1: cpu: 0.6% command: init pid: 1 mem: 10.1 MiB (0.1%)
  2: cpu: 0.4% command: mariadbd pid: 671 mem: 1232.9 MiB (15.7%)
  3: cpu: 0.3% command: packagekitd pid: 1592 mem: 17.6 MiB (0.2%)
  4: cpu: 0.2% command: [kworker/2:1-wg-crypt-wg2] pid: 1307 mem: 0.00 MiB (0.0%)
  5: cpu: 0.1% command: [kworker/2:2-events] pid: 80 mem: 0.00 MiB (0.0%)
  Memory top: 5 of 167
  1: mem: 1232.9 MiB (15.7%) command: mariadbd pid: 671 cpu: 0.4%
  2: mem: 91.5 MiB (1.1%) command: lightdm-gtk-greeter pid: 810 cpu: 0.1%
  3: mem: 59.0 MiB (0.7%) command: xorg pid: 591 cpu: 0.0%
  4: mem: 31.8 MiB (0.4%) command: apache2 pid: 842 cpu: 0.0%
  5: mem: 30.4 MiB (0.3%) command: php-fpm: pid: 529 cpu: 0.0%
Info:
  Processes: 167 Uptime: 21m Init: systemd v: 247 runlevel: 5 tool: systemctl Compilers: gcc: N/A
  alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.13

Benchmark #57454 - Brand: Kingston KC2000 M.2 Series