Benchmark #57626 - pibenchmarks.com

Brand: Samsung eMMC (BJTD4)
MMC (Embedded)
#68 / 1,676
268
#571 / 1,676
#15 / 75
#15 / 92
6,604

Overview
2022-03-06 03:47:13
#57,626
2,056
-4,548 (-221.21%)
Anonymous
Nebra eMMC 32GB

Storage Details
Samsung eMMC (BJTD4)
MMC (Embedded)
28.9G
MMC
Samsung
BJTD4
Embedded
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi Compute Module 3+ 1.0
Raspberry Pi Compute Module 3 Plus Rev 1.0
Raspberry Pi Foundation
N/A
4
1,200
400 (+150)
1 GB
450

Operating System

Debian GNU/Linux 11 (bullseye)
aarch64

Benchmark Results
19.5 MB/s
21.44 MB/s
21.36 MB/s
2,644 IOPS
3,132 IOPS
10,578 KB/s
12,531 KB/s
9,779 KB/s
8,098 KB/s
10,131 KB/s
8,882 KB/s

inxi Results
perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LC_CTYPE = "UTF-8", LANG = "en_US.UTF-8" are supported and installed on your system. perl: warning: Falling back to a fallback locale ("en_US.UTF-8"). System: Kernel: 5.10.92-v8+ aarch64 bits: 64 compiler: N/A parameters: coherent_pool=1M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 console=tty1 root=PARTUUID=b84dc5a1-02 rootfstype=ext4 fsck.repair=yes rootwait Console: N/A Distro: Raspberry Pi OS base: Debian GNU/Linux 11 (bullseye) Machine: Type: ARM System: Raspberry Pi Compute Module 3 Plus Rev 1.0 details: BCM2835 rev: a02100 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 975.8 MiB used: 346.1 MiB (35.5%) gpu: 16 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a53 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 4 Topology: cpus: 1x cores: 4 smt: N/A cache: N/A Speed (MHz): avg: 1200 min/max: 600/1200 scaling: driver: cpufreq-dt governor: ondemand cores: 1: 1200 2: 1200 3: 1200 4: 1200 bogomips: N/A Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Not affected Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Not affected Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc class-ID: fb Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: No display server data found. Headless machine? tty: 80x40 Message: Unable to show GL data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Network: Device-1: bcm2835-sdhci driver: N/A port: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: mmcnr IF: eth0 state: unknown speed: N/A duplex: N/A mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link Device-2: Exar USB Ethernet type: USB driver: cdc_ether bus-ID: 1-1.1.1:4 chip-ID: 04e2:1300 class-ID: 0a00 IF: eth0 state: unknown speed: N/A duplex: N/A mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-1: br-edd6e3150adb state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: docker0 state: down mac: IP v4: scope: global broadcast: IF-ID-3: veth4fe781b state: up speed: 10000 Mbps duplex: full mac: IF-ID-4: veth5f56909 state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: vethdfc4adf state: up speed: 10000 Mbps duplex: full mac: WAN IP: Bluetooth: Message: No bluetooth data found. Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 29.12 GiB used: 10.32 GiB (35.5%) ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: Samsung model: BJTD4R size: 29.12 GiB block-size: physical: 512 B logical: 512 B type: SSD rev: 0x8 scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. Message: No optical or floppy data found. Partition: ID-1: / raw-size: 28.87 GiB size: 28.4 GiB (98.40%) used: 10.27 GiB (36.2%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs uuid: b73b1dc9-6e12-4e68-9d06-1a1892663226 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 31.3 MiB (12.4%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: DBF3-0E3A ID-3: /home//miner_data/log raw-size: 400 MiB size: 370.9 MiB (92.72%) used: 23.3 MiB (6.3%) fs: ext4 block-size: 4096 B dev: /dev/zram0 maj-min: 254:0 label: N/A uuid: N/A Swap: Kernel: swappiness: 80 (default 60) cache-pressure: 100 (default) ID-1: swap-1 type: zram size: 719.9 MiB used: 166.2 MiB (23.1%) priority: 75 dev: /dev/zram1 Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 100mA chip-ID: 1a40:0101 class-ID: 0900 Hub-3: 1-1.1:3 info: Exar Exars XR22800 Hub ports: 7 rev: 2.0 speed: 480 Mb/s power: 250mA chip-ID: 04e2:0800 class-ID: 0900 Device-1: 1-1.1.1:4 info: Exar USB Ethernet type: Ethernet Network,CDC-Data driver: cdc_ether interfaces: 2 rev: 2.0 speed: 480 Mb/s chip-ID: 04e2:1300 class-ID: 0a00 Device-2: 1-1.1.6:5 info: Exar USB I2C type: HID driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 04e2:1100 class-ID: 0300 Device-3: 1-1.1.7:6 info: Exar USB EDGE type: HID driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 04e2:1200 class-ID: 0300 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 647 lib: 343 Active apt repos in: /etc/apt/sources.list 1: deb http: //deb.debian.org/debian bullseye main contrib non-free 2: deb http: //security.debian.org/debian-security bullseye-security main contrib non-free 3: deb http: //deb.debian.org/debian bullseye-updates main contrib non-free Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=arm64 signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https: //download.docker.com/linux/debian bullseye stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ bullseye main Processes: CPU top: 5 of 137 1: cpu: 52.5% command: miner pid: 55178 mem: 136.8 MiB (14.2%) 2: cpu: 10.6% command: lora_pkt_fwd pid: 196613 mem: 0.42 MiB (0.0%) 3: cpu: 2.5% command: [spi1] pid: 225 mem: 0.00 MiB (0.0%) 4: cpu: 0.4% command: python3 pid: 980 mem: 8.09 MiB (0.8%) 5: cpu: 0.4% command: [kworker/1:0h-mmc_complete] pid: 256156 mem: 0.00 MiB (0.0%) Memory top: 5 of 137 1: mem: 136.8 MiB (14.2%) command: miner pid: 55178 cpu: 52.5% 2: mem: 23.0 MiB (2.3%) command: dockerd pid: 590 cpu: 0.2% 3: mem: 15.5 MiB (1.6%) command: systemd-journald pid: 442 cpu: 0.0% 4: mem: 11.4 MiB (1.1%) command: containerd pid: 515 cpu: 0.1% 5: mem: 8.23 MiB (0.8%) command: init pid: 1 cpu: 0.0% Info: Processes: 137 Uptime: 1d 22h 8m Init: systemd v: 247 runlevel: 3 target: multi-user.target tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.13

inxi Results

perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
	LANGUAGE = (unset),
	LC_ALL = (unset),
	LC_CTYPE = "UTF-8",
	LANG = "en_US.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_US.UTF-8").
System:
  Kernel: 5.10.92-v8+ aarch64 bits: 64 compiler: N/A parameters: coherent_pool=1M
    snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=720
    bcm2708_fb.fbheight=480 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1
    smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000
    console=tty1 root=PARTUUID=b84dc5a1-02 rootfstype=ext4 fsck.repair=yes rootwait
  Console: N/A Distro: Raspberry Pi OS base: Debian GNU/Linux 11 (bullseye)
Machine:
  Type: ARM System: Raspberry Pi Compute Module 3 Plus Rev 1.0 details: BCM2835 rev: a02100
    Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 975.8 MiB used: 346.1 MiB (35.5%) gpu: 16 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a53 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0
    stepping: 4
  Topology: cpus: 1x cores: 4 smt: N/A cache: N/A
  Speed (MHz): avg: 1200 min/max: 600/1200 scaling: driver: cpufreq-dt governor: ondemand cores:
    1: 1200 2: 1200 3: 1200 4: 1200 bogomips: N/A
  Features: asimd cpuid crc32 evtstrm fp
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: spec_store_bypass status: Not affected
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 status: Not affected
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc class-ID: fb
  Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
  Display: server: No display server data found. Headless machine? tty: 80x40
  Message: Unable to show GL data. Required tool glxinfo missing.
Audio:
  Device-1: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
Network:
  Device-1: bcm2835-sdhci driver: N/A port: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: mmcnr
  IF: eth0 state: unknown speed: N/A duplex: N/A mac: 
  IP v4:  type: dynamic noprefixroute scope: global broadcast: 
  IP v6:  scope: link
  Device-2: Exar USB Ethernet type: USB driver: cdc_ether bus-ID: 1-1.1.1:4 chip-ID: 04e2:1300
    class-ID: 0a00 IF: eth0 state: unknown speed: N/A duplex: N/A mac: 
  IP v4:  type: dynamic noprefixroute scope: global broadcast: 
  IP v6:  scope: link
  IF-ID-1: br-edd6e3150adb state: up speed: 10000 Mbps duplex: unknown mac: 
  IP v4:  scope: global broadcast: 
  IP v6:  scope: link
  IF-ID-2: docker0 state: down mac: 
  IP v4:  scope: global broadcast: 
  IF-ID-3: veth4fe781b state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-4: veth5f56909 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-5: vethdfc4adf state: up speed: 10000 Mbps duplex: full mac: 
  WAN IP: 
Bluetooth:
  Message: No bluetooth data found.
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 29.12 GiB used: 10.32 GiB (35.5%)
  ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: Samsung model: BJTD4R size: 29.12 GiB block-size:
    physical: 512 B logical: 512 B type: SSD rev: 0x8 scheme: MBR
  SMART Message: Unknown smartctl error. Unable to generate data.
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 28.87 GiB size: 28.4 GiB (98.40%) used: 10.27 GiB (36.2%) fs: ext4
    block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs
    uuid: b73b1dc9-6e12-4e68-9d06-1a1892663226
  ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 31.3 MiB (12.4%) fs: vfat
    block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: DBF3-0E3A
  ID-3: /home//miner_data/log raw-size: 400 MiB size: 370.9 MiB (92.72%)
    used: 23.3 MiB (6.3%) fs: ext4 block-size: 4096 B dev: /dev/zram0 maj-min: 254:0 label: N/A
    uuid: N/A
Swap:
  Kernel: swappiness: 80 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: zram size: 719.9 MiB used: 166.2 MiB (23.1%) priority: 75 dev: /dev/zram1
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 100mA
    chip-ID: 1a40:0101 class-ID: 0900
  Hub-3: 1-1.1:3 info: Exar Exars XR22800 Hub ports: 7 rev: 2.0 speed: 480 Mb/s power: 250mA
    chip-ID: 04e2:0800 class-ID: 0900
  Device-1: 1-1.1.1:4 info: Exar USB Ethernet type: Ethernet Network,CDC-Data driver: cdc_ether
    interfaces: 2 rev: 2.0 speed: 480 Mb/s chip-ID: 04e2:1300 class-ID: 0a00 Device-2: 1-1.1.6:5 info: Exar USB I2C type: HID driver: hid-generic,usbhid interfaces: 1
    rev: 2.0 speed: 480 Mb/s chip-ID: 04e2:1100 class-ID: 0300 Device-3: 1-1.1.7:6 info: Exar USB EDGE type: HID driver: hid-generic,usbhid interfaces: 1
    rev: 2.0 speed: 480 Mb/s chip-ID: 04e2:1200 class-ID: 0300 Sensors:
  Missing: Required tool sensors not installed. Check --recommends
Repos:
  Packages: apt: 647 lib: 343
  Active apt repos in: /etc/apt/sources.list
    1: deb http: //deb.debian.org/debian bullseye main contrib non-free
    2: deb http: //security.debian.org/debian-security bullseye-security main contrib non-free
    3: deb http: //deb.debian.org/debian bullseye-updates main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/docker.list
    1: deb [arch=arm64 signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https: //download.docker.com/linux/debian bullseye stable
  Active apt repos in: /etc/apt/sources.list.d/raspi.list
    1: deb http: //archive.raspberrypi.org/debian/ bullseye main
Processes:
  CPU top: 5 of 137
  1: cpu: 52.5% command: miner pid: 55178 mem: 136.8 MiB (14.2%)
  2: cpu: 10.6% command: lora_pkt_fwd pid: 196613 mem: 0.42 MiB (0.0%)
  3: cpu: 2.5% command: [spi1] pid: 225 mem: 0.00 MiB (0.0%)
  4: cpu: 0.4% command: python3 pid: 980 mem: 8.09 MiB (0.8%)
  5: cpu: 0.4% command: [kworker/1:0h-mmc_complete] pid: 256156 mem: 0.00 MiB (0.0%)
  Memory top: 5 of 137
  1: mem: 136.8 MiB (14.2%) command: miner pid: 55178 cpu: 52.5%
  2: mem: 23.0 MiB (2.3%) command: dockerd pid: 590 cpu: 0.2%
  3: mem: 15.5 MiB (1.6%) command: systemd-journald pid: 442 cpu: 0.0%
  4: mem: 11.4 MiB (1.1%) command: containerd pid: 515 cpu: 0.1%
  5: mem: 8.23 MiB (0.8%) command: init pid: 1 cpu: 0.0%
Info:
  Processes: 137 Uptime: 1d 22h 8m Init: systemd v: 247 runlevel: 3 target: multi-user.target
  tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release
  inxi: 3.3.13

Benchmark #57626 - Brand: Samsung eMMC (BJTD4)