Benchmark #57658 - pibenchmarks.com

Brand: Lexar USB Flash Drive
USB Flash
#257 / 1,679
62
#1,243 / 1,679
#24 / 94
#25 / 89
1,345
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.com.au Amazon.de Amazon.es Amazon.pl Amazon.sg

Overview
2022-03-06 16:26:47
#57,658
1,437
+92 (+6.40%)
piper
lexar jumpdrive

Storage Details
Lexar USB Flash Drive
USB Flash
55.7G
USB Flash
Lexar
USBFlashDrive
3.20
5,000
21c4:0cd1
0x21c4
0x0cd1
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
ARMv7 v7l
4
1,750 (+250)
550 (+50)
4 GB
1,600

Operating System

SparkyLinux 6.2 (Po-Tolo)
armv7l

Benchmark Results
81.7 MB/s
82.12 MB/s
65.58 MB/s
189 IOPS
2,168 IOPS
757 KB/s
8,674 KB/s
20,784 KB/s
2,228 KB/s
5,085 KB/s
686 KB/s

inxi Results
System: Host: raspberrypi Kernel: 5.10.92-v7l+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=0d1f9c96-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait ipv6.disable=1 Console: pty pts/0 DM: LightDM 1.26.0 Distro: SparkyLinux 6.2 (Po-Tolo) base: Debian 11.0 bullseye Machine: Type: ARM System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2711 rev: c03112 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.82 GiB used: 837.8 MiB (21.4%) gpu: 256 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 3 Topology: cpus: 1x cores: 4 smt: N/A cache: N/A Speed (MHz): avg: 1750 min/max: 600/1800 scaling: driver: cpufreq-dt governor: ondemand cores: 1: 1750 2: 1750 3: 1750 4: 1750 bogomips: 1296 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: X.org v: 1.20.11 compositor: marco v: 1.24.1 driver: X: loaded: modesetting unloaded: fbdev gpu: vc4-drm,vc4_crtc,vc4_dpi,vc4_dsi,vc4_firmware_kms,vc4_hdmi,vc4_hvs,vc4_txp,vc4_v3d,vc4_vec tty: 120x30 Monitor-1: HDMI-A-1 model: Samsung built: 2010 res: 1920x1080 dpi: 70 gamma: 1.2 size: 160x90mm (6.3x3.5") diag: 801mm (31.5") ratio: 16:9 modes: max: 1920x1080 min: 720x400 Message: Unable to show GL data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.92-v7l+ running: yes Sound Server-2: PulseAudio v: 14.2 running: yes Sound Server-3: PipeWire v: 0.3.19 running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: down mac: XX:XX:XX:XX:XX:XX Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X WAN IP: 172.100.X.X Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: XX:XX:XX:XX:XX:XX bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 176.8 GiB used: 32.51 GiB (18.4%) ID-1: /dev/mmcblk0 maj-min: 179:0 model: SN128 size: 119.08 GiB block-size: physical: 512 B logical: 512 B type: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Lexar model: USB Flash Drive size: 57.71 GiB block-size: physical: 512 B logical: 512 B type: SSD rev: PMAP scheme: GPT SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No optical or floppy data found. Partition: ID-1: / raw-size: 118.84 GiB size: 116.9 GiB (98.37%) used: 9.84 GiB (8.4%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs uuid: 63daaa80-b925-4b5f-afff-ccee5d430b92 ID-2: /boot raw-size: 250 MiB size: 246.1 MiB (98.46%) used: 48.3 MiB (19.6%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: 8341-690C ID-3: /media/pi/VTOYEFI raw-size: 32 MiB size: 31.7 MiB (99.18%) used: 22.9 MiB (72.1%) fs: vfat block-size: 512 B dev: /dev/sda2 maj-min: 8:2 label: VTOYEFI uuid: 0FEE-D01D ID-4: /media/pi/Ventoy raw-size: 55.68 GiB size: 55.68 GiB (100.00%) used: 22.6 GiB (40.6%) fs: exfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: Ventoy uuid: 4E21-0000 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Device-1: 1-1.4:3 info: Logitech N48/M-BB48/M-UK96A [FirstMouse Plus] type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s power: 50mA chip-ID: 046d:c001 class-ID: 0301 Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-1:2 info: Lexar USB Flash Drive type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.2 speed: 5 Gb/s power: 504mA chip-ID: 21c4:0cd1 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 1464 lib: 816 Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ bullseye main Active apt repos in: /etc/apt/sources.list.d/sparky-unstable.list 1: deb [signed-by=/usr/share/keyrings/sparky.gpg.key] https://repo.sparkylinux.org/ unstable main 2: deb-src [signed-by=/usr/share/keyrings/sparky.gpg.key] https://repo.sparkylinux.org/ unstable main Active apt repos in: /etc/apt/sources.list.d/sparky.list 1: deb [signed-by=/usr/share/keyrings/sparky.gpg.key] https://repo.sparkylinux.org/ core main 2: deb-src [signed-by=/usr/share/keyrings/sparky.gpg.key] https://repo.sparkylinux.org/ core main 3: deb [signed-by=/usr/share/keyrings/sparky.gpg.key] https://repo.sparkylinux.org/ potolo main 4: deb-src [signed-by=/usr/share/keyrings/sparky.gpg.key] https://repo.sparkylinux.org/ potolo main Processes: CPU top: 5 of 192 1: cpu: 0.5% command: [kworker/0:1h-mmc_complete] pid: 2750 mem: 0.00 MiB (0.0%) 2: cpu: 0.4% command: vncagent-raspi pid: 622 mem: 5.10 MiB (0.1%) 3: cpu: 0.4% command: mate-menu pid: 1073 mem: 52.1 MiB (1.4%) 4: cpu: 0.2% command: [kworker/u8:1-events_unbound] pid: 2590 mem: 0.00 MiB (0.0%) 5: cpu: 0.2% command: smartd pid: 3161 mem: 3.66 MiB (0.0%) Memory top: 5 of 192 1: mem: 136.6 MiB (3.7%) command: mate-panel pid: 1010 cpu: 0.0% 2: mem: 93.3 MiB (2.5%) command: xorg pid: 614 cpu: 0.1% 3: mem: 56.1 MiB (1.5%) command: caja pid: 1057 cpu: 0.0% 4: mem: 52.1 MiB (1.4%) command: mate-menu pid: 1073 cpu: 0.4% 5: mem: 45.3 MiB (1.2%) command: x-session-manager pid: 837 cpu: 0.0% Info: Processes: 192 Uptime: 1h 39m Init: systemd v: 247 runlevel: 5 target: graphical.target tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Shell: speedtest.sh (sudo) default: Bash v: 5.1.4 running-in: pty pts/0 (SSH) inxi: 3.3.13

inxi Results

System:
  Host: raspberrypi Kernel: 5.10.92-v7l+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M
    8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1
    video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000
    vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=0d1f9c96-02
    rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait ipv6.disable=1
  Console: pty pts/0 DM: LightDM 1.26.0 Distro: SparkyLinux 6.2 (Po-Tolo)
    base: Debian 11.0 bullseye
Machine:
  Type: ARM System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2711 rev: c03112
    Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 3.82 GiB used: 837.8 MiB (21.4%) gpu: 256 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: 0
    stepping: 3
  Topology: cpus: 1x cores: 4 smt: N/A cache: N/A
  Speed (MHz): avg: 1750 min/max: 600/1800 scaling: driver: cpufreq-dt governor: ondemand
    cores: 1: 1750 2: 1750 3: 1750 4: 1750 bogomips: 1296
  Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3
  vfpv4
  Vulnerabilities: No CPU vulnerability/bugs data available.
Graphics:
  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu
  Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
  Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
  Display: server: X.org v: 1.20.11 compositor: marco v: 1.24.1 driver: X: loaded: modesetting
    unloaded: fbdev
    gpu: vc4-drm,vc4_crtc,vc4_dpi,vc4_dsi,vc4_firmware_kms,vc4_hdmi,vc4_hvs,vc4_txp,vc4_v3d,vc4_vec
    tty: 120x30
  Monitor-1: HDMI-A-1 model: Samsung built: 2010 res: 1920x1080 dpi: 70 gamma: 1.2
    size: 160x90mm (6.3x3.5") diag: 801mm (31.5") ratio: 16:9 modes: max: 1920x1080 min: 720x400
  Message: Unable to show GL data. Required tool glxinfo missing.
Audio:
  Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio
    class-ID: bcm2835_audio
  Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
  Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
  Sound Server-1: ALSA v: k5.10.92-v7l+ running: yes
  Sound Server-2: PulseAudio v: 14.2 running: yes
  Sound Server-3: PipeWire v: 0.3.19 running: yes
Network:
  Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000
    class-ID: mmcnr
  IF: wlan0 state: down mac: XX:XX:XX:XX:XX:XX
  Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A
    chip-ID: brcm:fd580000 class-ID: ethernet
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X
  WAN IP: 172.100.X.X
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address: XX:XX:XX:XX:XX:XX bt-v: 3.0
    lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 176.8 GiB used: 32.51 GiB (18.4%)
  ID-1: /dev/mmcblk0 maj-min: 179:0 model: SN128 size: 119.08 GiB block-size: physical: 512 B
    logical: 512 B type: SSD scheme: MBR
  SMART Message: Unknown smartctl error. Unable to generate data.
  ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Lexar model: USB Flash Drive size: 57.71 GiB
    block-size: physical: 512 B logical: 512 B type: SSD rev: PMAP
    scheme: GPT
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 118.84 GiB size: 116.9 GiB (98.37%) used: 9.84 GiB (8.4%) fs: ext4
    block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs
    uuid: 63daaa80-b925-4b5f-afff-ccee5d430b92
  ID-2: /boot raw-size: 250 MiB size: 246.1 MiB (98.46%) used: 48.3 MiB (19.6%) fs: vfat
    block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: 8341-690C
  ID-3: /media/pi/VTOYEFI raw-size: 32 MiB size: 31.7 MiB (99.18%) used: 22.9 MiB (72.1%)
    fs: vfat block-size: 512 B dev: /dev/sda2 maj-min: 8:2 label: VTOYEFI uuid: 0FEE-D01D
  ID-4: /media/pi/Ventoy raw-size: 55.68 GiB size: 55.68 GiB (100.00%) used: 22.6 GiB (40.6%)
    fs: exfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: Ventoy uuid: 4E21-0000
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
  ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA
    chip-ID: 2109:3431 class-ID: 0900
  Device-1: 1-1.4:3 info: Logitech N48/M-BB48/M-UK96A [FirstMouse Plus] type: Mouse
    driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s power: 50mA
    chip-ID: 046d:c001 class-ID: 0301
  Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003
    class-ID: 0900
  Device-1: 2-1:2 info: Lexar USB Flash Drive type: Mass Storage driver: usb-storage
    interfaces: 1 rev: 3.2 speed: 5 Gb/s power: 504mA chip-ID: 21c4:0cd1 class-ID: 0806
    Sensors:
  Missing: Required tool sensors not installed. Check --recommends
Repos:
  Packages: apt: 1464 lib: 816
  Active apt repos in: /etc/apt/sources.list
    1: deb http://raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-free rpi
  Active apt repos in: /etc/apt/sources.list.d/raspi.list
    1: deb http://archive.raspberrypi.org/debian/ bullseye main
  Active apt repos in: /etc/apt/sources.list.d/sparky-unstable.list
    1: deb [signed-by=/usr/share/keyrings/sparky.gpg.key] https://repo.sparkylinux.org/ unstable main
    2: deb-src [signed-by=/usr/share/keyrings/sparky.gpg.key] https://repo.sparkylinux.org/ unstable main
  Active apt repos in: /etc/apt/sources.list.d/sparky.list
    1: deb [signed-by=/usr/share/keyrings/sparky.gpg.key] https://repo.sparkylinux.org/ core main
    2: deb-src [signed-by=/usr/share/keyrings/sparky.gpg.key] https://repo.sparkylinux.org/ core main
    3: deb [signed-by=/usr/share/keyrings/sparky.gpg.key] https://repo.sparkylinux.org/ potolo main
    4: deb-src [signed-by=/usr/share/keyrings/sparky.gpg.key] https://repo.sparkylinux.org/ potolo main
Processes:
  CPU top: 5 of 192
  1: cpu: 0.5% command: [kworker/0:1h-mmc_complete] pid: 2750 mem: 0.00 MiB (0.0%)
  2: cpu: 0.4% command: vncagent-raspi pid: 622 mem: 5.10 MiB (0.1%)
  3: cpu: 0.4% command: mate-menu pid: 1073 mem: 52.1 MiB (1.4%)
  4: cpu: 0.2% command: [kworker/u8:1-events_unbound] pid: 2590 mem: 0.00 MiB (0.0%)
  5: cpu: 0.2% command: smartd pid: 3161 mem: 3.66 MiB (0.0%)
  Memory top: 5 of 192
  1: mem: 136.6 MiB (3.7%) command: mate-panel pid: 1010 cpu: 0.0%
  2: mem: 93.3 MiB (2.5%) command: xorg pid: 614 cpu: 0.1%
  3: mem: 56.1 MiB (1.5%) command: caja pid: 1057 cpu: 0.0%
  4: mem: 52.1 MiB (1.4%) command: mate-menu pid: 1073 cpu: 0.4%
  5: mem: 45.3 MiB (1.2%) command: x-session-manager pid: 837 cpu: 0.0%
Info:
  Processes: 192 Uptime: 1h 39m Init: systemd v: 247 runlevel: 5 target: graphical.target
  tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Shell: speedtest.sh (sudo) default: Bash
  v: 5.1.4 running-in: pty pts/0 (SSH) inxi: 3.3.13

Benchmark #57658 - Brand: Lexar USB Flash Drive