Benchmark #57738 - pibenchmarks.com

Brand: Samsung 970 EVO Plus
SSD (M.2 NVMe)
#20 / 1,539
451
#100 / 1,539
#100 / 875
#91 / 194
15,169
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2022-03-10 06:25:39
#57,738
9,725
-5,444 (-55.98%)
Anonymous

Storage Details
Samsung 970 EVO Plus
SSD (M.2 NVMe)
232.6G
SSD
Samsung
SSD970EVOPlus250GB
3.20
5,000
0bda:9210
0x0bda (Realtek Semiconductor Corp.)
0x9210 (RTL9210 M.2 NVME Adapter)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
N/A
4
2,100 (+600)
600 (+100)
4 GB
1,600

Operating System

Debian GNU/Linux 11 (bullseye)
aarch64

Benchmark Results
222 MB/s
335.43 MB/s
326.33 MB/s
14,862 IOPS
30,796 IOPS
59,448 KB/s
123,187 KB/s
37,129 KB/s
31,556 KB/s
22,035 KB/s
31,663 KB/s

inxi Results
System: Host: rpi4mobile Kernel: 5.10.103-v8+ aarch64 bits: 64 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 console=tty1 root=PARTUUID=56732304-02 rootfstype=ext4 fsck.repair=yes rootwait modules-load=dwc2,g_ether plymouth.ignore-serial-consoles Console: pty pts/0 Distro: Raspberry Pi OS base: Debian GNU/Linux 11 (bullseye) Machine: Type: ARM System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2835 rev: c03114 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.77 GiB used: 382.8 MiB (9.9%) gpu: 16 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 Topology: cpus: 1x cores: 4 smt: N/A cache: N/A Speed (MHz): avg: 2100 min/max: 800/2100 scaling: driver: cpufreq-dt governor: ondemand cores: 1: 2100 2: 2100 3: 2100 4: 2100 bogomips: 432 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2708-fb driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: fb Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: X.org v: 1.20.11 driver: gpu: N/A tty: 150x50 Message: Unable to show GL data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-2: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: PulseAudio v: 14.2 running: yes Sound Server-2: PipeWire v: 0.3.19 running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: up mac: XX:XX:XX:XX:XX:XX IP v4: 10.3.X.X/24 type: noprefixroute scope: global broadcast: 10.3.X.X IP v6: fe80::6985:7341:a4f:11e2/64 scope: link Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: down mac: XX:XX:XX:XX:XX:XX Device-3: TP-Link AC600 wireless Realtek RTL8811AU [Archer T2U Nano] type: USB driver: rtl88XXau bus-ID: 1-1.3:3 chip-ID: 2357:011e class-ID: 0000 IF: wlxc006c302fcc3 state: up mac: XX:XX:XX:XX:XX:XX IP v4: 172.24.X.X/24 type: dynamic noprefixroute scope: global broadcast: 172.24.X.X IP v6: fe80::d24b:ef57:23e9:a062/64 type: noprefixroute scope: link IF-ID-1: usb0 state: up speed: N/A duplex: N/A mac: XX:XX:XX:XX:XX:XX IP v4: 10.55.X.X/29 scope: global broadcast: 10.55.X.X IP v4: 169.254.X.X/16 type: noprefixroute scope: global broadcast: 169.254.X.X IP v6: fe80::9828:a9ff:fef6:b012/64 scope: link WAN IP: 2.26.X.X Bluetooth: Message: No bluetooth data found. Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 709.6 GiB used: 5.05 GiB (0.7%) ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: Swissbit model: SF512 size: 476.71 GiB block-size: physical: 512 B logical: 512 B type: SSD scheme: GPT SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Sabrent model: Sabrent size: 232.89 GiB block-size: physical: 512 B logical: 512 B type: N/A drive rev: 1.00 drive rev: 2B2QEXM7 temp: 36 Celsius C scheme: MBR SMART: yes health: PASSED on: 6d 7h cycles: 1,893 read-units: 19,236,689 [9.84 TB] written-units: 19,929,643 [10.2 TB] Message: No optical or floppy data found. Partition: ID-1: / raw-size: 232.63 GiB size: 227.92 GiB (97.97%) used: 4.98 GiB (2.2%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rpi4mobileSDD uuid: dfa40560-7643-449e-8407-fedca8b94d7b ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 50.1 MiB (19.9%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: N/A uuid: D751-6673 ID-3: /var/log raw-size: 256 MiB size: 231.7 MiB (90.52%) used: 25.5 MiB (11.0%) fs: ext4 block-size: 4096 B dev: /dev/zram0 maj-min: 254:0 label: N/A uuid: N/A Swap: Kernel: swappiness: 80 (default 60) cache-pressure: 500 (default 100) ID-1: swap-1 type: zram size: 1.13 GiB used: 0 KiB (0.0%) priority: 75 dev: /dev/zram1 Unmounted: ID-1: /dev/mmcblk0p1 maj-min: 179:1 size: 476.71 GiB fs: ext4 label: N/A uuid: b4633f51-02b9-494a-90ac-0459a79b7708 USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Device-1: 1-1.3:3 info: TP-Link AC600 wireless Realtek RTL8811AU [Archer T2U Nano] type: Network driver: rtl88XXau interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 500mA chip-ID: 2357:011e class-ID: 0000 Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-1:2 info: Realtek RTL9210 M.2 NVME Adapter type: Mass Storage driver: uas interfaces: 1 rev: 3.2 speed: 5 Gb/s power: 896mA chip-ID: 0bda:9210 class-ID: 0806 Hub-4: 3-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 1421 lib: 804 Active apt repos in: /etc/apt/sources.list 1: deb http://deb.debian.org/debian bullseye main contrib non-free 2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free 3: deb http://deb.debian.org/debian bullseye-updates main contrib non-free Active apt repos in: /etc/apt/sources.list.d/azlux.list 1: deb [signed-by=/usr/share/keyrings/azlux-archive-keyring.gpg] http://packages.azlux.fr/debian/ bullseye main Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=arm64 signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https://download.docker.com/linux/debian bullseye stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ bullseye main No active dnf repos in: /etc/dnf/dnf.conf Processes: CPU top: 5 of 151 1: cpu: 26.5% command: dnsmasq pid: 995 mem: 108.2 MiB (2.8%) 2: cpu: 2.7% command: init pid: 1 mem: 10.4 MiB (0.2%) 3: cpu: 1.5% command: -bash pid: 1719 mem: 4.62 MiB (0.1%) 4: cpu: 1.2% command: colord pid: 1230 mem: 11.8 MiB (0.3%) 5: cpu: 1.1% command: networkmanager pid: 460 mem: 16.2 MiB (0.4%) Memory top: 5 of 151 1: mem: 108.2 MiB (2.8%) command: dnsmasq pid: 995 cpu: 26.5% 2: mem: 35.9 MiB (0.9%) command: containerd pid: 577 cpu: 0.3% 3: mem: 18.3 MiB (0.4%) command: packagekitd pid: 1687 cpu: 0.6% 4: mem: 16.6 MiB (0.4%) command: php-cgi pid: 636 cpu: 0.0% 5: mem: 16.2 MiB (0.4%) command: networkmanager pid: 460 cpu: 1.1% Info: Processes: 151 Uptime: 1m Init: systemd v: 247 runlevel: 3 target: multi-user.target tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Shell: Storage.sh (sudo) default: Bash v: 5.1.4 running-in: pty pts/0 inxi: 3.3.13

inxi Results

System:
  Host: rpi4mobile Kernel: 5.10.103-v8+ aarch64 bits: 64 compiler: N/A parameters: coherent_pool=1M
    8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=0
    bcm2708_fb.fbheight=0 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1
    smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000
    console=tty1 root=PARTUUID=56732304-02 rootfstype=ext4 fsck.repair=yes rootwait
    modules-load=dwc2,g_ether plymouth.ignore-serial-consoles
  Console: pty pts/0 Distro: Raspberry Pi OS base: Debian GNU/Linux 11 (bullseye)
Machine:
  Type: ARM System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2835 rev: c03114
    Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 3.77 GiB used: 382.8 MiB (9.9%) gpu: 16 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0
    stepping: 3
  Topology: cpus: 1x cores: 4 smt: N/A cache: N/A
  Speed (MHz): avg: 2100 min/max: 800/2100 scaling: driver: cpufreq-dt governor: ondemand
    cores: 1: 2100 2: 2100 3: 2100 4: 2100 bogomips: 432
  Features: asimd cpuid crc32 evtstrm fp
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 status: Vulnerable
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: bcm2708-fb driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: fb
  Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
  Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
  Display: server: X.org v: 1.20.11 driver: gpu: N/A tty: 150x50
  Message: Unable to show GL data. Required tool glxinfo missing.
Audio:
  Device-1: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
  Sound Server-1: PulseAudio v: 14.2 running: yes
  Sound Server-2: PipeWire v: 0.3.19 running: yes
Network:
  Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000
    class-ID: mmcnr
  IF: wlan0 state: up mac: XX:XX:XX:XX:XX:XX
  IP v4: 10.3.X.X/24 type: noprefixroute scope: global broadcast: 10.3.X.X
  IP v6: fe80::6985:7341:a4f:11e2/64 scope: link
  Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A
    chip-ID: brcm:fd580000 class-ID: ethernet
  IF: eth0 state: down mac: XX:XX:XX:XX:XX:XX
  Device-3: TP-Link AC600 wireless Realtek RTL8811AU [Archer T2U Nano] type: USB
    driver: rtl88XXau bus-ID: 1-1.3:3 chip-ID: 2357:011e class-ID: 0000   IF: wlxc006c302fcc3 state: up mac: XX:XX:XX:XX:XX:XX
  IP v4: 172.24.X.X/24 type: dynamic noprefixroute scope: global broadcast: 172.24.X.X
  IP v6: fe80::d24b:ef57:23e9:a062/64 type: noprefixroute scope: link
  IF-ID-1: usb0 state: up speed: N/A duplex: N/A mac: XX:XX:XX:XX:XX:XX
  IP v4: 10.55.X.X/29 scope: global broadcast: 10.55.X.X
  IP v4: 169.254.X.X/16 type: noprefixroute scope: global broadcast: 169.254.X.X
  IP v6: fe80::9828:a9ff:fef6:b012/64 scope: link
  WAN IP: 2.26.X.X
Bluetooth:
  Message: No bluetooth data found.
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 709.6 GiB used: 5.05 GiB (0.7%)
  ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: Swissbit model: SF512 size: 476.71 GiB block-size:
    physical: 512 B logical: 512 B type: SSD scheme: GPT
  SMART Message: Unknown smartctl error. Unable to generate data.
  ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Sabrent model: Sabrent size: 232.89 GiB
    block-size: physical: 512 B logical: 512 B type: N/A     drive rev: 1.00 drive rev: 2B2QEXM7 temp: 36 Celsius C scheme: MBR
  SMART: yes health: PASSED on: 6d 7h cycles: 1,893 read-units: 19,236,689 [9.84 TB]
    written-units: 19,929,643 [10.2 TB]
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 232.63 GiB size: 227.92 GiB (97.97%) used: 4.98 GiB (2.2%) fs: ext4
    block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rpi4mobileSDD
    uuid: dfa40560-7643-449e-8407-fedca8b94d7b
  ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 50.1 MiB (19.9%) fs: vfat
    block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: N/A uuid: D751-6673
  ID-3: /var/log raw-size: 256 MiB size: 231.7 MiB (90.52%) used: 25.5 MiB (11.0%) fs: ext4
    block-size: 4096 B dev: /dev/zram0 maj-min: 254:0 label: N/A uuid: N/A
Swap:
  Kernel: swappiness: 80 (default 60) cache-pressure: 500 (default 100)
  ID-1: swap-1 type: zram size: 1.13 GiB used: 0 KiB (0.0%) priority: 75 dev: /dev/zram1
Unmounted:
  ID-1: /dev/mmcblk0p1 maj-min: 179:1 size: 476.71 GiB fs: ext4 label: N/A
    uuid: b4633f51-02b9-494a-90ac-0459a79b7708
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA
    chip-ID: 2109:3431 class-ID: 0900
  Device-1: 1-1.3:3 info: TP-Link AC600 wireless Realtek RTL8811AU [Archer T2U Nano]
    type: Network driver: rtl88XXau interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 500mA
    chip-ID: 2357:011e class-ID: 0000   Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003
    class-ID: 0900
  Device-1: 2-1:2 info: Realtek RTL9210 M.2 NVME Adapter type: Mass Storage driver: uas
    interfaces: 1 rev: 3.2 speed: 5 Gb/s power: 896mA chip-ID: 0bda:9210 class-ID: 0806
      Hub-4: 3-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
Sensors:
  Missing: Required tool sensors not installed. Check --recommends
Repos:
  Packages: apt: 1421 lib: 804
  Active apt repos in: /etc/apt/sources.list
    1: deb http://deb.debian.org/debian bullseye main contrib non-free
    2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
    3: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/azlux.list
    1: deb [signed-by=/usr/share/keyrings/azlux-archive-keyring.gpg] http://packages.azlux.fr/debian/ bullseye main
  Active apt repos in: /etc/apt/sources.list.d/docker.list
    1: deb [arch=arm64 signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https://download.docker.com/linux/debian bullseye stable
  Active apt repos in: /etc/apt/sources.list.d/raspi.list
    1: deb http://archive.raspberrypi.org/debian/ bullseye main
  No active dnf repos in: /etc/dnf/dnf.conf
Processes:
  CPU top: 5 of 151
  1: cpu: 26.5% command: dnsmasq pid: 995 mem: 108.2 MiB (2.8%)
  2: cpu: 2.7% command: init pid: 1 mem: 10.4 MiB (0.2%)
  3: cpu: 1.5% command: -bash pid: 1719 mem: 4.62 MiB (0.1%)
  4: cpu: 1.2% command: colord pid: 1230 mem: 11.8 MiB (0.3%)
  5: cpu: 1.1% command: networkmanager pid: 460 mem: 16.2 MiB (0.4%)
  Memory top: 5 of 151
  1: mem: 108.2 MiB (2.8%) command: dnsmasq pid: 995 cpu: 26.5%
  2: mem: 35.9 MiB (0.9%) command: containerd pid: 577 cpu: 0.3%
  3: mem: 18.3 MiB (0.4%) command: packagekitd pid: 1687 cpu: 0.6%
  4: mem: 16.6 MiB (0.4%) command: php-cgi pid: 636 cpu: 0.0%
  5: mem: 16.2 MiB (0.4%) command: networkmanager pid: 460 cpu: 1.1%
Info:
  Processes: 151 Uptime: 1m Init: systemd v: 247 runlevel: 3 target: multi-user.target
  tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Shell: Storage.sh (sudo) default: Bash v: 5.1.4
  running-in: pty pts/0 inxi: 3.3.13

Benchmark #57738 - Brand: Samsung 970 EVO Plus