Benchmark #57897 - pibenchmarks.com

Brand: SanDisk SD Ultra (SL32G)
C10
#70 / 1,679
277
#1,485 / 1,679
#299 / 394
796
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2022-03-15 04:27:30
#57,897
391
-405 (-103.58%)
Anonymous
SanDisk 32GB SDHC on Pogoplug v4

Secure Digital (SD) Card Details
SanDisk SD Ultra (SL32G)
C10
26G
SD
SanDisk
SL32G
SDHC
3.00
0x03
PT
3.0
10/2015
Class 10
None
None
None

System Board Details
		Amazon.com
Poloplug Pogoplug v4
Pogoplug v4
Poloplug
Feroceon 88FR131 v5l
1
800
109 MB

Operating System

Debian GNU/Linux 11 (bullseye)
armv5tel

Benchmark Results
2.6 MB/s
7.89 MB/s
8.7 MB/s
110 IOPS
1,450 IOPS
440 KB/s
5,802 KB/s
5,385 KB/s
1,385 KB/s
4,778 KB/s
430 KB/s

inxi Results
System: Kernel: 5.13.6-kirkwood-tld-1 armv5tel bits: 32 compiler: gcc v: 8.3.0 parameters: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 orion_nand:2M(u-boot),3M(uImage),3M(uImage2),8M(failsafe),112M(root) Console: pty pts/0 Distro: Debian GNU/Linux 11 (bullseye) Machine: Type: ARM System: Pogoplug v4 details: Marvell Kirkwood rev: N/A Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 109 MiB used: 37.1 MiB (34.1%) RAM Report: missing: Required tool dmidecode not installed. Check --recommends PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: Feroceon 88FR131 v5l variant: feroceon bits: 32 type: UP arch: 5TE family: N/A model-id: 2 stepping: 1 Topology: cpus: 1x cores: 1 smt: N/A cache: N/A Speed (MHz): 200 min/max: 200/800 scaling: driver: kirkwood-cpufreq governor: ondemand core: 1: 200 bogomips: 333 Features: edsp fastmult half swp thumb Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Not affected Type: spectre_v1 status: Not affected Type: spectre_v2 status: Not affected Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Message: No device data found. Display: server: No display server data found. Headless machine? tty: 80x40 Message: Unable to show GL data. Required tool glxinfo missing. Audio: Message: No device data found. Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic scope: global broadcast: IP v6: type: deprecated dynamic mngtmpaddr scope: global IP v6: type: dynamic mngtmpaddr scope: global IP v6: scope: link WAN IP: Bluetooth: Message: No bluetooth data found. Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 327.12 GiB used: 1.41 GiB (0.4%) ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: SanDisk model: SL32G size: 29.03 GiB block-size: physical: 512 B logical: 512 B type: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/sda maj-min: 8:0 vendor: Seagate model: ST320LT007-9ZV142 family: Momentus Thin size: 298.09 GiB block-size: physical: 4096 B logical: 512 B sata: 2.6 speed: 3.0 Gb/s type: HDD rpm: 7242 rev: LVM1 temp: 28 C scheme: MBR SMART: yes state: enabled health: PASSED on: 98d 16h cycles: 1272 Pre-Fail: attribute: Spin_Retry_Count value: 100 worst: 100 threshold: 97 Message: No optical or floppy data found. Partition: ID-1: / raw-size: 26 GiB size: 25.42 GiB (97.78%) used: 1.4 GiB (5.5%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: rootfs uuid: c53ae237-598c-409c-a80a-24424a7bf600 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: partition size: 3.03 GiB used: 9 MiB (0.3%) priority: -2 dev: /dev/mmcblk0p5 maj-min: 179:5 label: N/A uuid: 85076c5f-e37d-4cb0-a55e-39acde4e9f2e Unmounted: ID-1: /dev/mmcblk0p2 maj-min: 179:2 size: 1 KiB fs: label: N/A uuid: N/A ID-2: /dev/sda1 maj-min: 8:1 size: 32 GiB fs: label: N/A uuid: N/A USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 2-0:1 info: Hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-3: 3-0:1 info: Super-speed hub ports: 2 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 426 lib: 230 Active apt repos in: /etc/apt/sources.list 1: deb http: //debian.csail.mit.edu/debian/ bullseye main non-free contrib 2: deb-src http: //debian.csail.mit.edu/debian/ bullseye main non-free contrib 3: deb http: //security.debian.org/debian-security bullseye-security main contrib non-free 4: deb http: //debian.csail.mit.edu/debian/ bullseye-updates main contrib non-free 5: deb-src http: //debian.csail.mit.edu/debian/ bullseye-updates main contrib non-free 6: deb http: //debian.csail.mit.edu/debian/ bullseye-backports main contrib non-free 7: deb-src http: //debian.csail.mit.edu/debian/ bullseye-backports main contrib non-free Active apt repos in: /etc/apt/sources.list.d/ookla_speedtest-cli.list 1: deb [signed-by=/usr/share/keyrings/ookla_speedtest-cli-archive-keyring.gpg] https: //packagecloud.io/ookla/speedtest-cli/debian/ bullseye main 2: deb-src [signed-by=/usr/share/keyrings/ookla_speedtest-cli-archive-keyring.gpg] https: //packagecloud.io/ookla/speedtest-cli/debian/ bullseye main Processes: CPU top: 5 of 81 1: cpu: 0.4% command: [kworker/0:0-events] pid: 4679 mem: 0.00 MiB (0.0%) 2: cpu: 0.3% command: sshd: pid: 3827 mem: 0.39 MiB (0.3%) 3: cpu: 0.3% command: [kworker/0:2-events] pid: 4326 mem: 0.00 MiB (0.0%) 4: cpu: 0.1% command: ntpd pid: 1315 mem: 0.42 MiB (0.3%) 5: cpu: 0.1% command: [kworker/0:2h-mmc_complete] pid: 3655 mem: 0.00 MiB (0.0%) Memory top: 5 of 81 1: mem: 2.15 MiB (1.9%) command: ps pid: 4719 cpu: 0.0% 2: mem: 1.75 MiB (1.6%) command: bash pid: 4713 cpu: 0.0% 3: mem: 1.66 MiB (1.5%) command: sshd: pid: 3833 cpu: 0.1% 4: mem: 1.43 MiB (1.3%) command: bash pid: 3839 cpu: 0.0% 5: mem: 1.43 MiB (1.3%) command: sed pid: 4715 cpu: 0.1% Info: Processes: 81 Uptime: 3d 7m Init: SysVinit v: 2.96 runlevel: 2 default: 2 tool: service Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.13

inxi Results

System:
  Kernel: 5.13.6-kirkwood-tld-1 armv5tel bits: 32 compiler: gcc v: 8.3.0
    parameters: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10
    orion_nand:2M(u-boot),3M(uImage),3M(uImage2),8M(failsafe),112M(root)
  Console: pty pts/0 Distro: Debian GNU/Linux 11 (bullseye)
Machine:
  Type: ARM System: Pogoplug v4 details: Marvell Kirkwood rev: N/A
Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 109 MiB used: 37.1 MiB (34.1%)
  RAM Report: missing: Required tool dmidecode not installed. Check --recommends
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: Feroceon 88FR131 v5l variant: feroceon bits: 32 type: UP arch: 5TE family: N/A
    model-id: 2 stepping: 1
  Topology: cpus: 1x cores: 1 smt: N/A cache: N/A
  Speed (MHz): 200 min/max: 200/800 scaling: driver: kirkwood-cpufreq governor: ondemand core:
    1: 200 bogomips: 333
  Features: edsp fastmult half swp thumb
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: spec_store_bypass status: Not affected
  Type: spectre_v1 status: Not affected
  Type: spectre_v2 status: Not affected
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Message: No device data found.
  Display: server: No display server data found. Headless machine? tty: 80x40
  Message: Unable to show GL data. Required tool glxinfo missing.
Audio:
  Message: No device data found.
Network:
  Message: No ARM data found for this feature.
  IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: 
  IP v4:  type: dynamic scope: global broadcast: 
  IP v6:  type: deprecated dynamic mngtmpaddr scope: global
  IP v6:  type: dynamic mngtmpaddr scope: global
  IP v6:  scope: link
  WAN IP: 
Bluetooth:
  Message: No bluetooth data found.
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 327.12 GiB used: 1.41 GiB (0.4%)
  ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: SanDisk model: SL32G size: 29.03 GiB block-size:
    physical: 512 B logical: 512 B type: SSD scheme: MBR
  SMART Message: Unknown smartctl error. Unable to generate data.
  ID-2: /dev/sda maj-min: 8:0 vendor: Seagate model: ST320LT007-9ZV142 family: Momentus Thin
    size: 298.09 GiB block-size: physical: 4096 B logical: 512 B sata: 2.6 speed: 3.0 Gb/s type: HDD
    rpm: 7242 rev: LVM1 temp: 28 C scheme: MBR
  SMART: yes state: enabled health: PASSED on: 98d 16h cycles: 1272 Pre-Fail:
    attribute: Spin_Retry_Count value: 100 worst: 100 threshold: 97
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 26 GiB size: 25.42 GiB (97.78%) used: 1.4 GiB (5.5%) fs: ext4
    block-size: 4096 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: rootfs
    uuid: c53ae237-598c-409c-a80a-24424a7bf600
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
  ID-1: swap-1 type: partition size: 3.03 GiB used: 9 MiB (0.3%) priority: -2
    dev: /dev/mmcblk0p5 maj-min: 179:5 label: N/A uuid: 85076c5f-e37d-4cb0-a55e-39acde4e9f2e
Unmounted:
  ID-1: /dev/mmcblk0p2 maj-min: 179:2 size: 1 KiB fs:  label: N/A uuid: N/A
  ID-2: /dev/sda1 maj-min: 8:1 size: 32 GiB fs:  label: N/A uuid: N/A
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 2-0:1 info: Hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-3: 3-0:1 info: Super-speed hub ports: 2 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003
    class-ID: 0900
Sensors:
  Missing: Required tool sensors not installed. Check --recommends
Repos:
  Packages: apt: 426 lib: 230
  Active apt repos in: /etc/apt/sources.list
    1: deb http: //debian.csail.mit.edu/debian/ bullseye main non-free contrib
    2: deb-src http: //debian.csail.mit.edu/debian/ bullseye main non-free contrib
    3: deb http: //security.debian.org/debian-security bullseye-security main contrib non-free
    4: deb http: //debian.csail.mit.edu/debian/ bullseye-updates main contrib non-free
    5: deb-src http: //debian.csail.mit.edu/debian/ bullseye-updates main contrib non-free
    6: deb http: //debian.csail.mit.edu/debian/ bullseye-backports main contrib non-free
    7: deb-src http: //debian.csail.mit.edu/debian/ bullseye-backports main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/ookla_speedtest-cli.list
    1: deb [signed-by=/usr/share/keyrings/ookla_speedtest-cli-archive-keyring.gpg] https: //packagecloud.io/ookla/speedtest-cli/debian/ bullseye main
    2: deb-src [signed-by=/usr/share/keyrings/ookla_speedtest-cli-archive-keyring.gpg] https: //packagecloud.io/ookla/speedtest-cli/debian/ bullseye main
Processes:
  CPU top: 5 of 81
  1: cpu: 0.4% command: [kworker/0:0-events] pid: 4679 mem: 0.00 MiB (0.0%)
  2: cpu: 0.3% command: sshd: pid: 3827 mem: 0.39 MiB (0.3%)
  3: cpu: 0.3% command: [kworker/0:2-events] pid: 4326 mem: 0.00 MiB (0.0%)
  4: cpu: 0.1% command: ntpd pid: 1315 mem: 0.42 MiB (0.3%)
  5: cpu: 0.1% command: [kworker/0:2h-mmc_complete] pid: 3655 mem: 0.00 MiB (0.0%)
  Memory top: 5 of 81
  1: mem: 2.15 MiB (1.9%) command: ps pid: 4719 cpu: 0.0%
  2: mem: 1.75 MiB (1.6%) command: bash pid: 4713 cpu: 0.0%
  3: mem: 1.66 MiB (1.5%) command: sshd: pid: 3833 cpu: 0.1%
  4: mem: 1.43 MiB (1.3%) command: bash pid: 3839 cpu: 0.0%
  5: mem: 1.43 MiB (1.3%) command: sed pid: 4715 cpu: 0.1%
Info:
  Processes: 81 Uptime: 3d 7m Init: SysVinit v: 2.96 runlevel: 2 default: 2 tool: service
  Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.13

Benchmark #57897 - Brand: SanDisk SD Ultra (SL32G)