Benchmark #57958 - pibenchmarks.com

Brand: Samsung 980
SSD (M.2 NVMe)
#11 / 1,675
943
#161 / 1,675
#161 / 984
#152 / 281
32,350
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2022-03-17 03:55:06
#57,958
8,644
-23,706 (-274.25%)
Anonymous
samsung 980

Storage Details
Samsung 980
SSD (M.2 NVMe)
465.5G
SSD
Samsung
SSD980500GB
3.20
5,000
0bda:9210
0x0bda (Realtek Semiconductor Corp.)
0x9210 (RTL9210 M.2 NVME Adapter)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
ARMv7 v7l
4
1,800 (+300)
500
4 GB
1,600

Operating System

Raspbian GNU/Linux 11 (bullseye)
armv7l

Benchmark Results
217 MB/s
315.39 MB/s
303.95 MB/s
11,879 IOPS
22,985 IOPS
47,517 KB/s
91,941 KB/s
28,795 KB/s
29,952 KB/s
20,120 KB/s
29,229 KB/s

inxi Results
perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LC_CTYPE = "UTF-8", LANG = "en_GB.UTF-8" are supported and installed on your system. perl: warning: Falling back to a fallback locale ("en_GB.UTF-8"). System: Kernel: 5.10.92-v7l+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=21cdc046-02 rootfstype=ext4 fsck.repair=yes rootwait Console: pty pts/0 Distro: Raspbian GNU/Linux 11 (bullseye) Machine: Type: ARM System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2711 rev: c03114 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.82 GiB used: 298.5 MiB (7.6%) gpu: 76 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 3 Topology: cpus: 1x cores: 4 smt: N/A cache: N/A Speed (MHz): avg: 1800 min/max: 600/1800 scaling: driver: cpufreq-dt governor: ondemand cores: 1: 1800 2: 1800 3: 1800 4: 1800 bogomips: 1296 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: No display server data found. Headless machine? tty: 80x40 Message: Unable to show GL data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Sound Server-1: ALSA v: k5.10.92-v7l+ running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: down mac: Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 1.36 TiB used: 1.6 GiB (0.1%) ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Orico model: RV500-256G size: 465.76 GiB block-size: physical: 512 B logical: 512 B type: N/A rev: 1.00 drive rev: 1B4QFXO7 temp: 37 Celsius C scheme: MBR SMART: yes health: PASSED cycles: 7 read-units: 625 [320 MB] written-units: 2,346 [1.20 GB] ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: Western Digital model: WD My Passport 0748 drive model: WD10JMVW-11S5XS0 family: Elements / My Passport (USB, AF) size: 931.48 GiB block-size: physical: 4096 B logical: 512 B sata: 3.0 speed: 3.0 Gb/s type: HDD rpm: 5400 rev: 1019 drive rev: 01.01A01 temp: 32 C scheme: MBR SMART: yes state: enabled health: PASSED on: 1y 15d 18h cycles: 233 Message: No optical or floppy data found. Partition: ID-1: / raw-size: 465.51 GiB size: 458.2 GiB (98.43%) used: 1.55 GiB (0.3%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: 64bc182a-ca9d-4aa1-8936-d2919863c22a ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 49.5 MiB (19.6%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 5484-8F96 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/sdb1 maj-min: 8:17 size: 921.71 GiB fs: ntfs label: WD_1000 uuid: DEB60503B604DE41 USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-1:3 info: Western Digital My Passport (WDBKXH WDBY8L) type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 896mA chip-ID: 1058:0748 class-ID: 0806 Device-2: 2-2:2 info: Realtek RTL9210 M.2 NVME Adapter type: Mass Storage driver: uas interfaces: 1 rev: 3.2 speed: 5 Gb/s power: 896mA chip-ID: 0bda:9210 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 581 lib: 314 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ bullseye main Processes: CPU top: 5 of 148 1: cpu: 3.3% command: init pid: 1 mem: 8.92 MiB (0.2%) 2: cpu: 0.5% command: [kworker/1:6+events_freezable] pid: 90 mem: 0.00 MiB (0.0%) 3: cpu: 0.4% command: [kworker/u8:2-ext4-rsv-conversion] pid: 337 mem: 0.00 MiB (0.0%) 4: cpu: 0.3% command: systemd-journald pid: 134 mem: 17.2 MiB (0.4%) 5: cpu: 0.3% command: dbus-daemon pid: 392 mem: 3.63 MiB (0.0%) Memory top: 5 of 148 1: mem: 17.2 MiB (0.4%) command: systemd-journald pid: 134 cpu: 0.3% 2: mem: 10.0 MiB (0.2%) command: udisksd pid: 453 cpu: 0.0% 3: mem: 8.92 MiB (0.2%) command: init pid: 1 cpu: 3.3% 4: mem: 7.29 MiB (0.1%) command: systemd pid: 717 cpu: 0.1% 5: mem: 7.05 MiB (0.1%) command: sshd: pid: 714 cpu: 0.2% Info: Processes: 148 Uptime: 6m Init: systemd v: 247 runlevel: 5 tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.13

inxi Results

perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
	LANGUAGE = (unset),
	LC_ALL = (unset),
	LC_CTYPE = "UTF-8",
	LANG = "en_GB.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_GB.UTF-8").
System:
  Kernel: 5.10.92-v7l+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0
    snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX
    vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1
    root=PARTUUID=21cdc046-02 rootfstype=ext4 fsck.repair=yes rootwait
  Console: pty pts/0 Distro: Raspbian GNU/Linux 11 (bullseye)
Machine:
  Type: ARM System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2711 rev: c03114 Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 3.82 GiB used: 298.5 MiB (7.6%) gpu: 76 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: 0
    stepping: 3
  Topology: cpus: 1x cores: 4 smt: N/A cache: N/A
  Speed (MHz): avg: 1800 min/max: 600/1800 scaling: driver: cpufreq-dt governor: ondemand cores:
    1: 1800 2: 1800 3: 1800 4: 1800 bogomips: 1296
  Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4
  Vulnerabilities: No CPU vulnerability/bugs data available.
Graphics:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700
    class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700
    class-ID: hdmi
  Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu
  Display: server: No display server data found. Headless machine? tty: 80x40
  Message: Unable to show GL data. Required tool glxinfo missing.
Audio:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi
  Device-3: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio
    class-ID: bcm2835_audio
  Sound Server-1: ALSA v: k5.10.92-v7l+ running: yes
Network:
  Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000
    class-ID: mmcnr
  IF: wlan0 state: down mac: 
  Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A
    chip-ID: brcm:fd580000 class-ID: ethernet
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 
  IP v4:  type: dynamic noprefixroute scope: global broadcast: 
  IP v6:  scope: link
  WAN IP: 
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address:  bt-v: 3.0 lmp-v: 5.0
    sub-v: 6119 hci-v: 5.0 rev: 156
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 1.36 TiB used: 1.6 GiB (0.1%)
  ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Orico model: RV500-256G size: 465.76 GiB
    block-size: physical: 512 B logical: 512 B type: N/A rev: 1.00 drive rev: 1B4QFXO7 temp: 37 Celsius C scheme: MBR
  SMART: yes health: PASSED cycles: 7 read-units: 625 [320 MB] written-units: 2,346 [1.20 GB]
  ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: Western Digital model: WD My Passport 0748
    drive model: WD10JMVW-11S5XS0 family: Elements / My Passport (USB, AF) size: 931.48 GiB
    block-size: physical: 4096 B logical: 512 B sata: 3.0 speed: 3.0 Gb/s type: HDD rpm: 5400
    rev: 1019 drive rev: 01.01A01 temp: 32 C scheme: MBR
  SMART: yes state: enabled health: PASSED on: 1y 15d 18h cycles: 233
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 465.51 GiB size: 458.2 GiB (98.43%) used: 1.55 GiB (0.3%) fs: ext4
    block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs
    uuid: 64bc182a-ca9d-4aa1-8936-d2919863c22a
  ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 49.5 MiB (19.6%) fs: vfat
    block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 5484-8F96
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
  ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap
Unmounted:
  ID-1: /dev/sdb1 maj-min: 8:17 size: 921.71 GiB fs: ntfs label: WD_1000 uuid: DEB60503B604DE41
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA
    chip-ID: 2109:3431 class-ID: 0900
  Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003
    class-ID: 0900
  Device-1: 2-1:3 info: Western Digital My Passport (WDBKXH WDBY8L) type: Mass Storage
    driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 896mA chip-ID: 1058:0748
    class-ID: 0806 Device-2: 2-2:2 info: Realtek RTL9210 M.2 NVME Adapter type: Mass Storage driver: uas
    interfaces: 1 rev: 3.2 speed: 5 Gb/s power: 896mA chip-ID: 0bda:9210 class-ID: 0806
    Sensors:
  Missing: Required tool sensors not installed. Check --recommends
Repos:
  Packages: apt: 581 lib: 314
  Active apt repos in: /etc/apt/sources.list
    1: deb http: //raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-free rpi
  Active apt repos in: /etc/apt/sources.list.d/raspi.list
    1: deb http: //archive.raspberrypi.org/debian/ bullseye main
Processes:
  CPU top: 5 of 148
  1: cpu: 3.3% command: init pid: 1 mem: 8.92 MiB (0.2%)
  2: cpu: 0.5% command: [kworker/1:6+events_freezable] pid: 90 mem: 0.00 MiB (0.0%)
  3: cpu: 0.4% command: [kworker/u8:2-ext4-rsv-conversion] pid: 337 mem: 0.00 MiB (0.0%)
  4: cpu: 0.3% command: systemd-journald pid: 134 mem: 17.2 MiB (0.4%)
  5: cpu: 0.3% command: dbus-daemon pid: 392 mem: 3.63 MiB (0.0%)
  Memory top: 5 of 148
  1: mem: 17.2 MiB (0.4%) command: systemd-journald pid: 134 cpu: 0.3%
  2: mem: 10.0 MiB (0.2%) command: udisksd pid: 453 cpu: 0.0%
  3: mem: 8.92 MiB (0.2%) command: init pid: 1 cpu: 3.3%
  4: mem: 7.29 MiB (0.1%) command: systemd pid: 717 cpu: 0.1%
  5: mem: 7.05 MiB (0.1%) command: sshd: pid: 714 cpu: 0.2%
Info:
  Processes: 148 Uptime: 6m Init: systemd v: 247 runlevel: 5 tool: systemctl Compilers:
  gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.13

Benchmark #57958 - Brand: Samsung 980