Benchmark #58138 - pibenchmarks.com

Brand: SanDisk Ultra Fit
USB Flash
#13 / 1,677
756
#1,411 / 1,677
#41 / 93
#41 / 89
1,018
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2022-03-21 04:51:29
#58,138
967
-51 (-5.27%)
Anonymous
Sandisk Ultra Dual Drive Go USB Type-C 512GB

Storage Details
SanDisk Ultra Fit
USB Flash
905G
USB Flash
SanDisk
UltraFit
0x696c
3.20
5,000
0781:55a9
0x0781 (SanDisk Corp.)
0x55a9
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
N/A
4
1,500
500
4 GB
1,600

Operating System

Raspbian GNU/Linux 11 (bullseye)
aarch64

Benchmark Results
37.6 MB/s
99.63 MB/s
53.67 MB/s
403 IOPS
1,454 IOPS
1,612 KB/s
5,817 KB/s
10,965 KB/s
2,933 KB/s
5,853 KB/s
1,169 KB/s

inxi Results
System: Kernel: 5.10.103-v8+ aarch64 bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=39d89287-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles cgroup_memory=1 cgroup_enable=memory apparmor=1 security=apparmor Console: N/A DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 11 (bullseye) Machine: Type: ARM System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.78 GiB used: 1.06 GiB (28.0%) gpu: 76 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 Topology: cpus: 1x cores: 4 smt: N/A cache: N/A Speed (MHz): avg: 1500 min/max: 600/1500 scaling: driver: cpufreq-dt governor: ondemand cores: 1: 1500 2: 1500 3: 1500 4: 1500 bogomips: 432 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: X.org v: 1.20.11 compositor: xcompmgr driver: X: loaded: modesetting unloaded: fbdev gpu: vc4_hdmi,vc4_hdmi,vc4_drm tty: 80x40 Message: Unable to show GL data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Sound Server-1: ALSA v: k5.10.103-v8+ running: yes Sound Server-2: PulseAudio v: 14.2 running: yes Sound Server-3: PipeWire v: 0.3.19 running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: down mac: IF-ID-1: br-004fac175cbc state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IF-ID-2: br-d04d9a01ed11 state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IF-ID-3: docker0 state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IF-ID-4: hassio state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IF-ID-5: veth05fa421 state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: veth0ae2349 state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: veth1d42b3e state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: veth1e35640 state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: veth244bf2d state: up speed: 10000 Mbps duplex: full mac: IF-ID-10: veth32ecdf8 state: up speed: 10000 Mbps duplex: full mac: IF-ID-11: veth32fa226 state: up speed: 10000 Mbps duplex: full mac: IF-ID-12: veth558f905 state: up speed: 10000 Mbps duplex: full mac: IF-ID-13: veth6f59c31 state: up speed: 10000 Mbps duplex: full mac: IF-ID-14: veth80b449e state: up speed: 10000 Mbps duplex: full mac: IF-ID-15: veth8e820ff state: up speed: 10000 Mbps duplex: full mac: IF-ID-16: veth8e83da0 state: up speed: 10000 Mbps duplex: full mac: IF-ID-17: vetha7874e3 state: up speed: 10000 Mbps duplex: full mac: IF-ID-18: vethae4f8cf state: up speed: 10000 Mbps duplex: full mac: IF-ID-19: vethb04cd9e state: up speed: 10000 Mbps duplex: full mac: IF-ID-20: vethb12a9e0 state: up speed: 10000 Mbps duplex: full mac: IF-ID-21: vethb937037 state: up speed: 10000 Mbps duplex: full mac: IF-ID-22: vethccbf724 state: up speed: 10000 Mbps duplex: full mac: IF-ID-23: vethcd9f21f state: up speed: 10000 Mbps duplex: full mac: IF-ID-24: vethdba1e19 state: up speed: 10000 Mbps duplex: full mac: IF-ID-25: vethf741612 state: up speed: 10000 Mbps duplex: full mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 460.27 GiB used: 11.3 GiB (2.5%) ID-1: /dev/sda maj-min: 8:0 type: USB vendor: SanDisk model: USB 3.2Gen1 size: 460.27 GiB block-size: physical: 512 B logical: 512 B type: N/A rev: 1.00 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No optical or floppy data found. Partition: ID-1: / raw-size: 460.01 GiB size: 451.72 GiB (98.20%) used: 11.26 GiB (2.5%) fs: ext4 block-size: 512 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: e603363f-79c3-421f-a49e-3c01c0a6dd23 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.4 MiB (19.2%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 6ED3-22D6 Swap: Alert: No swap data was found. Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-1:2 info: SanDisk 3.2Gen1 type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.2 speed: 5 Gb/s power: 896mA chip-ID: 0781:55a9 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 1501 lib: 782 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/azlux.list 1: deb [signed-by=/usr/share/keyrings/azlux-archive-keyring.gpg] http: //packages.azlux.fr/debian/ bullseye main Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https: //download.docker.com/linux/raspbian bullseye stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ bullseye main Processes: CPU top: 5 of 330 1: cpu: 127% command: node pid: 14087 mem: 83.4 MiB (2.1%) 2: cpu: 10.5% command: python3 pid: 9645 mem: 126.3 MiB (3.3%) 3: cpu: 4.6% command: dockerd pid: 920 mem: 69.4 MiB (1.8%) 4: cpu: 3.2% command: python3 pid: 6517 mem: 67.0 MiB (1.7%) 5: cpu: 2.9% command: init pid: 1 mem: 9.01 MiB (0.2%) Memory top: 5 of 330 1: mem: 126.3 MiB (3.3%) command: python3 pid: 9645 cpu: 10.5% 2: mem: 83.4 MiB (2.1%) command: node pid: 14087 cpu: 127% 3: mem: 72.8 MiB (1.9%) command: xorg pid: 679 cpu: 0.5% 4: mem: 70.4 MiB (1.8%) command: node-red pid: 5943 cpu: 2.6% 5: mem: 69.4 MiB (1.8%) command: dockerd pid: 920 cpu: 4.6% Info: Processes: 330 Uptime: 5m Init: systemd v: 247 runlevel: 5 target: graphical.target tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.13

inxi Results

System:
  Kernel: 5.10.103-v8+ aarch64 bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0
    snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX
    vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1
    root=PARTUUID=39d89287-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash
    plymouth.ignore-serial-consoles cgroup_memory=1 cgroup_enable=memory apparmor=1
    security=apparmor
  Console: N/A DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 11 (bullseye)
Machine:
  Type: ARM System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 3.78 GiB used: 1.06 GiB (28.0%) gpu: 76 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0
    stepping: 3
  Topology: cpus: 1x cores: 4 smt: N/A cache: N/A
  Speed (MHz): avg: 1500 min/max: 600/1500 scaling: driver: cpufreq-dt governor: ondemand cores:
    1: 1500 2: 1500 3: 1500 4: 1500 bogomips: 432
  Features: asimd cpuid crc32 evtstrm fp
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 status: Vulnerable
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700
    class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700
    class-ID: hdmi
  Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu
  Display: server: X.org v: 1.20.11 compositor: xcompmgr driver: X: loaded: modesetting
    unloaded: fbdev gpu: vc4_hdmi,vc4_hdmi,vc4_drm tty: 80x40
  Message: Unable to show GL data. Required tool glxinfo missing.
Audio:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi
  Device-3: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio
    class-ID: bcm2835_audio
  Sound Server-1: ALSA v: k5.10.103-v8+ running: yes
  Sound Server-2: PulseAudio v: 14.2 running: yes
  Sound Server-3: PipeWire v: 0.3.19 running: yes
Network:
  Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000
    class-ID: mmcnr
  IF: wlan0 state: up mac: 
  IP v4:  type: dynamic noprefixroute scope: global broadcast: 
  IP v6:  scope: link
  Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A
    chip-ID: brcm:fd580000 class-ID: ethernet
  IF: eth0 state: down mac: 
  IF-ID-1: br-004fac175cbc state: up speed: 10000 Mbps duplex: unknown mac: 
  IP v4:  scope: global broadcast: 
  IF-ID-2: br-d04d9a01ed11 state: up speed: 10000 Mbps duplex: unknown mac: 
  IP v4:  scope: global broadcast: 
  IF-ID-3: docker0 state: up speed: 10000 Mbps duplex: unknown mac: 
  IP v4:  scope: global broadcast: 
  IF-ID-4: hassio state: up speed: 10000 Mbps duplex: unknown mac: 
  IP v4:  scope: global broadcast: 
  IF-ID-5: veth05fa421 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-6: veth0ae2349 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-7: veth1d42b3e state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-8: veth1e35640 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-9: veth244bf2d state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-10: veth32ecdf8 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-11: veth32fa226 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-12: veth558f905 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-13: veth6f59c31 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-14: veth80b449e state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-15: veth8e820ff state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-16: veth8e83da0 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-17: vetha7874e3 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-18: vethae4f8cf state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-19: vethb04cd9e state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-20: vethb12a9e0 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-21: vethb937037 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-22: vethccbf724 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-23: vethcd9f21f state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-24: vethdba1e19 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-25: vethf741612 state: up speed: 10000 Mbps duplex: full mac: 
  WAN IP: 
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address: 
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 460.27 GiB used: 11.3 GiB (2.5%)
  ID-1: /dev/sda maj-min: 8:0 type: USB vendor: SanDisk model: USB 3.2Gen1 size: 460.27 GiB
    block-size: physical: 512 B logical: 512 B type: N/A rev: 1.00 scheme: MBR
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 460.01 GiB size: 451.72 GiB (98.20%) used: 11.26 GiB (2.5%) fs: ext4
    block-size: 512 B dev: /dev/sda2 maj-min: 8:2 label: rootfs
    uuid: e603363f-79c3-421f-a49e-3c01c0a6dd23
  ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.4 MiB (19.2%) fs: vfat
    block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 6ED3-22D6
Swap:
  Alert: No swap data was found.
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA
    chip-ID: 2109:3431 class-ID: 0900
  Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003
    class-ID: 0900
  Device-1: 2-1:2 info: SanDisk 3.2Gen1 type: Mass Storage driver: usb-storage interfaces: 1
    rev: 3.2 speed: 5 Gb/s power: 896mA chip-ID: 0781:55a9 class-ID: 0806 Sensors:
  Missing: Required tool sensors not installed. Check --recommends
Repos:
  Packages: apt: 1501 lib: 782
  Active apt repos in: /etc/apt/sources.list
    1: deb http: //raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-free rpi
  Active apt repos in: /etc/apt/sources.list.d/azlux.list
    1: deb [signed-by=/usr/share/keyrings/azlux-archive-keyring.gpg] http: //packages.azlux.fr/debian/ bullseye main
  Active apt repos in: /etc/apt/sources.list.d/docker.list
    1: deb [arch=armhf signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https: //download.docker.com/linux/raspbian bullseye stable
  Active apt repos in: /etc/apt/sources.list.d/raspi.list
    1: deb http: //archive.raspberrypi.org/debian/ bullseye main
Processes:
  CPU top: 5 of 330
  1: cpu: 127% command: node pid: 14087 mem: 83.4 MiB (2.1%)
  2: cpu: 10.5% command: python3 pid: 9645 mem: 126.3 MiB (3.3%)
  3: cpu: 4.6% command: dockerd pid: 920 mem: 69.4 MiB (1.8%)
  4: cpu: 3.2% command: python3 pid: 6517 mem: 67.0 MiB (1.7%)
  5: cpu: 2.9% command: init pid: 1 mem: 9.01 MiB (0.2%)
  Memory top: 5 of 330
  1: mem: 126.3 MiB (3.3%) command: python3 pid: 9645 cpu: 10.5%
  2: mem: 83.4 MiB (2.1%) command: node pid: 14087 cpu: 127%
  3: mem: 72.8 MiB (1.9%) command: xorg pid: 679 cpu: 0.5%
  4: mem: 70.4 MiB (1.8%) command: node-red pid: 5943 cpu: 2.6%
  5: mem: 69.4 MiB (1.8%) command: dockerd pid: 920 cpu: 4.6%
Info:
  Processes: 330 Uptime: 5m Init: systemd v: 247 runlevel: 5 target: graphical.target
  tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release
  inxi: 3.3.13

Benchmark #58138 - Brand: SanDisk Ultra Fit