Benchmark #58297 - pibenchmarks.com

Brand: Lexar SD Professional 1000X
C10 U3
#275 / 1,539
32
#1,294 / 1,539
#246 / 369
913
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.se Amazon.sg

Overview
2022-03-26 15:15:21
#58,297
591
-322 (-54.48%)
Anonymous
Lexar 68BHO on Pi2B

Secure Digital (SD) Card Details
Lexar SD Professional 1000X
C10 U3
29.6G
SD
Lexar
68BHO
SDHC
4.00
0x28
BE
0.8
06/2016
Class 10
None
U3
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 2B 1.1
Raspberry Pi 2 Model B Rev 1.1
Raspberry Pi Foundation
ARMv7 v7l
4
900
250
1 GB
450 (+50)
50

Operating System

Raspbian GNU/Linux 11 (bullseye)
armv7l

Benchmark Results
5 MB/s
21.36 MB/s
21.63 MB/s
185 IOPS
2,236 IOPS
742 KB/s
8,946 KB/s
6,959 KB/s
1,171 KB/s
6,317 KB/s
979 KB/s

inxi Results
System: Host: rascsi1 Kernel: 5.10.92-v7+ arch: armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyAMA0,115200 console=tty1 root=PARTUUID=5008ce3e-02 rootfstype=ext4 fsck.repair=yes rootwait Console: tty 1 Distro: Raspbian GNU/Linux 11 (bullseye) Machine: Type: ARM System: Raspberry Pi 2 Model B Rev 1.1 details: BCM2835 rev: a21041 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 998.8 MiB used: 211.8 MiB (21.2%) gpu: 76 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: ARMv7 v7l variant: cortex-a7 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 5 Topology: cpus: 1x cores: 4 smt: N/A cache: N/A Speed (MHz): avg: 700 min/max: 600/900 scaling: driver: cpufreq-dt governor: ondemand cores: 1: 700 2: 700 3: 700 4: 700 bogomips: 230 Features: edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-hdmi driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:3f902000 class-ID: hdmi Device-2: bcm2835-vc4 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: gpu Display: server: No display server data found. Headless machine? tty: 240x67 Monitor-1: HDMI-A-1 model: HP 24es built: 2018 res: 1920x1080 dpi: 93 gamma: 1.2 chroma: red: x: 0.651 y: 0.337 green: x: 0.322 y: 0.612 blue: x: 0.153 y: 0.059 white: x: 0.314 y: 0.329 size: 527x296mm (20.75x11.65") diag: 604mm (23.8") ratio: 16:9 modes: 1920x1080, 1680x1050, 1600x900, 1280x1024, 1440x900, 1280x800, 1280x720, 1024x768, 800x600, 720x576, 720x480, 640x480, 720x400 Message: Unable to show GL data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:3f902000 class-ID: hdmi Device-2: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Sound Server-1: ALSA v: k5.10.92-v7+ running: yes Network: Device-1: bcm2835-sdhci driver: N/A port: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: mmcnr IF: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 10.100.X.X/24 type: dynamic noprefixroute scope: global broadcast: 10.100.X.X IP v6: fe80::e64:fade:badf:a4d7/64 scope: link Device-2: Microchip (formerly SMSC) SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus-ID: 1-1.1:3 chip-ID: 0424:ec00 class-ID: ff00 IF: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 10.100.X.X/24 type: dynamic noprefixroute scope: global broadcast: 10.100.X.X IP v6: fe80::e64:fade:badf:a4d7/64 scope: link WAN IP: 108.172.X.X Bluetooth: Message: No bluetooth data found. Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 29.83 GiB used: 21.04 GiB (70.5%) ID-1: /dev/mmcblk0 maj-min: 179:0 model: 68BHO size: 29.83 GiB block-size: physical: 512 B logical: 512 B type: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. Message: No optical or floppy data found. Partition: ID-1: / raw-size: 29.57 GiB size: 29.08 GiB (98.33%) used: 20.99 GiB (72.2%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs uuid: 64bc182a-ca9d-4aa1-8936-d2919863c22a ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 49.1 MiB (19.5%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: 5484-8F96 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: Microchip (formerly SMSC) SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 0424:9514 class-ID: 0900 Device-1: 1-1.1:3 info: Microchip (formerly SMSC) SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 0424:ec00 class-ID: ff00 Device-2: 1-1.4:4 info: Holtek USB Keyboard type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s power: 100mA chip-ID: 04d9:1605 class-ID: 0300 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 625 lib: 341 Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ bullseye main Processes: CPU top: 5 of 134 1: cpu: 7.8% command: python3 pid: 573 mem: 22.5 MiB (2.4%) 2: cpu: 7.6% command: init pid: 1 mem: 8.45 MiB (0.9%) 3: cpu: 1.7% command: login pid: 423 mem: 3.62 MiB (0.3%) 4: cpu: 1.2% command: systemd-journald pid: 134 mem: 10.8 MiB (1.1%) 5: cpu: 1.1% command: systemd-udevd pid: 155 mem: 4.50 MiB (0.4%) Memory top: 5 of 134 1: mem: 22.5 MiB (2.4%) command: python3 pid: 573 cpu: 7.8% 2: mem: 10.8 MiB (1.1%) command: systemd-journald pid: 134 cpu: 1.2% 3: mem: 9.62 MiB (1.0%) command: udisksd pid: 352 cpu: 0.5% 4: mem: 8.45 MiB (0.9%) command: init pid: 1 cpu: 7.6% 5: mem: 7.08 MiB (0.7%) command: systemd pid: 514 cpu: 0.7% Info: Processes: 134 Uptime: 2m Init: systemd v: 247 runlevel: 5 tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Shell: Bash (sudo) v: 5.1.4 running-in: tty 1 inxi: 3.3.14

inxi Results

System:
  Host: rascsi1 Kernel: 5.10.92-v7+ arch: armv7l bits: 32 compiler: N/A
    parameters: coherent_pool=1M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1
    video=HDMI-A-1:1920x1080M@60 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000
    console=ttyAMA0,115200 console=tty1 root=PARTUUID=5008ce3e-02 rootfstype=ext4 fsck.repair=yes
    rootwait
  Console: tty 1 Distro: Raspbian GNU/Linux 11 (bullseye)
Machine:
  Type: ARM System: Raspberry Pi 2 Model B Rev 1.1 details: BCM2835 rev: a21041
    Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 998.8 MiB used: 211.8 MiB (21.2%) gpu: 76 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: ARMv7 v7l variant: cortex-a7 bits: 32 type: MCP arch: v7l family: 7 model-id: 0
    stepping: 5
  Topology: cpus: 1x cores: 4 smt: N/A cache: N/A
  Speed (MHz): avg: 700 min/max: 600/900 scaling: driver: cpufreq-dt governor: ondemand cores:
    1: 700 2: 700 3: 700 4: 700 bogomips: 230
  Features: edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4
  Vulnerabilities: No CPU vulnerability/bugs data available.
Graphics:
  Device-1: bcm2835-hdmi driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:3f902000
    class-ID: hdmi
  Device-2: bcm2835-vc4 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: gpu
  Display: server: No display server data found. Headless machine? tty: 240x67
  Monitor-1: HDMI-A-1 model: HP 24es built: 2018 res: 1920x1080 dpi: 93
    gamma: 1.2 chroma: red: x: 0.651 y: 0.337 green: x: 0.322 y: 0.612 blue: x: 0.153 y: 0.059
    white: x: 0.314 y: 0.329 size: 527x296mm (20.75x11.65") diag: 604mm (23.8") ratio: 16:9
    modes: 1920x1080, 1680x1050, 1600x900, 1280x1024, 1440x900, 1280x800, 1280x720, 1024x768,
    800x600, 720x576, 720x480, 640x480, 720x400
  Message: Unable to show GL data. Required tool glxinfo missing.
Audio:
  Device-1: bcm2835-hdmi driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:3f902000 class-ID: hdmi
  Device-2: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio
    class-ID: bcm2835_audio
  Sound Server-1: ALSA v: k5.10.92-v7+ running: yes
Network:
  Device-1: bcm2835-sdhci driver: N/A port: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: mmcnr
  IF: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IP v4: 10.100.X.X/24 type: dynamic noprefixroute scope: global broadcast: 10.100.X.X
  IP v6: fe80::e64:fade:badf:a4d7/64 scope: link
  Device-2: Microchip (formerly SMSC) SMSC9512/9514 Fast Ethernet Adapter type: USB
    driver: smsc95xx bus-ID: 1-1.1:3 chip-ID: 0424:ec00 class-ID: ff00
  IF: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IP v4: 10.100.X.X/24 type: dynamic noprefixroute scope: global broadcast: 10.100.X.X
  IP v6: fe80::e64:fade:badf:a4d7/64 scope: link
  WAN IP: 108.172.X.X
Bluetooth:
  Message: No bluetooth data found.
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 29.83 GiB used: 21.04 GiB (70.5%)
  ID-1: /dev/mmcblk0 maj-min: 179:0 model: 68BHO size: 29.83 GiB block-size: physical: 512 B
    logical: 512 B type: SSD scheme: MBR
  SMART Message: Unknown smartctl error. Unable to generate data.
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 29.57 GiB size: 29.08 GiB (98.33%) used: 20.99 GiB (72.2%) fs: ext4
    block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs
    uuid: 64bc182a-ca9d-4aa1-8936-d2919863c22a
  ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 49.1 MiB (19.5%) fs: vfat
    block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: 5484-8F96
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
  ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: Microchip (formerly SMSC) SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s
    power: 2mA chip-ID: 0424:9514 class-ID: 0900
  Device-1: 1-1.1:3 info: Microchip (formerly SMSC) SMSC9512/9514 Fast Ethernet Adapter
    type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 2mA
    chip-ID: 0424:ec00 class-ID: ff00
  Device-2: 1-1.4:4 info: Holtek USB Keyboard type: Keyboard,HID driver: hid-generic,usbhid
    interfaces: 2 rev: 1.1 speed: 1.5 Mb/s power: 100mA chip-ID: 04d9:1605 class-ID: 0300
Sensors:
  Missing: Required tool sensors not installed. Check --recommends
Repos:
  Packages: apt: 625 lib: 341
  Active apt repos in: /etc/apt/sources.list
    1: deb http://raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-free rpi
  Active apt repos in: /etc/apt/sources.list.d/raspi.list
    1: deb http://archive.raspberrypi.org/debian/ bullseye main
Processes:
  CPU top: 5 of 134
  1: cpu: 7.8% command: python3 pid: 573 mem: 22.5 MiB (2.4%)
  2: cpu: 7.6% command: init pid: 1 mem: 8.45 MiB (0.9%)
  3: cpu: 1.7% command: login pid: 423 mem: 3.62 MiB (0.3%)
  4: cpu: 1.2% command: systemd-journald pid: 134 mem: 10.8 MiB (1.1%)
  5: cpu: 1.1% command: systemd-udevd pid: 155 mem: 4.50 MiB (0.4%)
  Memory top: 5 of 134
  1: mem: 22.5 MiB (2.4%) command: python3 pid: 573 cpu: 7.8%
  2: mem: 10.8 MiB (1.1%) command: systemd-journald pid: 134 cpu: 1.2%
  3: mem: 9.62 MiB (1.0%) command: udisksd pid: 352 cpu: 0.5%
  4: mem: 8.45 MiB (0.9%) command: init pid: 1 cpu: 7.6%
  5: mem: 7.08 MiB (0.7%) command: systemd pid: 514 cpu: 0.7%
Info:
  Processes: 134 Uptime: 2m Init: systemd v: 247 runlevel: 5 tool: systemctl Compilers:
  gcc: 10.2.1 alt: 10 Shell: Bash (sudo) v: 5.1.4 running-in: tty 1 inxi: 3.3.14

Benchmark #58297 - Brand: Lexar SD Professional 1000X