Benchmark #58308 - pibenchmarks.com

Brand: SanDisk SD Ultra A1 (SC64G)
A1 C10 U1
#15 / 1,539
577
#1,137 / 1,539
#140 / 369
1,239
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2022-03-26 18:38:46
#58,308
1,044
-195 (-18.68%)
Anonymous
SanDisk SC64G on Pi3B

Secure Digital (SD) Card Details
SanDisk SD Ultra A1 (SC64G)
A1 C10 U1
59.2G
SD
SanDisk
SC64G
SDXC
5.00
0x03
SD
8.0
07/2018
Class 10
A1
U1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B 1.2
Raspberry Pi 3 Model B Rev 1.2
Raspberry Pi Foundation
ARMv7 v7l
4
1,200
400
1 GB
450
50

Operating System

Raspbian GNU/Linux 11 (bullseye)
armv7l

Benchmark Results
18.5 MB/s
21.59 MB/s
21.87 MB/s
820 IOPS
2,187 IOPS
3,280 KB/s
8,750 KB/s
7,453 KB/s
3,379 KB/s
6,959 KB/s
3,043 KB/s

inxi Results
System: Host: raspberrypi Kernel: 5.10.92-v7+ arch: armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=77fca2f2-02 rootfstype=ext4 fsck.repair=yes rootwait Console: tty 1 Distro: Raspbian GNU/Linux 11 (bullseye) Machine: Type: ARM System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a22082 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 998.8 MiB used: 195.5 MiB (19.6%) gpu: 76 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 4 Topology: cpus: 1x cores: 4 smt: N/A cache: N/A Speed (MHz): avg: 1200 min/max: 600/1200 scaling: driver: cpufreq-dt governor: ondemand cores: 1: 1200 2: 1200 3: 1200 4: 1200 bogomips: 307 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-hdmi driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:3f902000 class-ID: hdmi Device-2: bcm2835-vc4 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: gpu Display: server: No display server data found. Headless machine? tty: 240x67 Monitor-1: HDMI-A-1 model: HP 24es built: 2018 res: 1920x1080 dpi: 93 gamma: 1.2 chroma: red: x: 0.651 y: 0.337 green: x: 0.322 y: 0.612 blue: x: 0.153 y: 0.059 white: x: 0.314 y: 0.329 size: 527x296mm (20.75x11.65") diag: 604mm (23.8") ratio: 16:9 modes: 1920x1080, 1680x1050, 1600x900, 1280x1024, 1440x900, 1280x800, 1280x720, 1024x768, 800x600, 720x576, 720x480, 640x480, 720x400 Message: Unable to show GL data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:3f902000 class-ID: hdmi Device-2: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Sound Server-1: ALSA v: k5.10.92-v7+ running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:3f300000 class-ID: mmcnr IF: wlan0 state: down mac: XX:XX:XX:XX:XX:XX Device-2: Microchip (formerly SMSC) SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus-ID: 1-1.1:3 chip-ID: 0424:ec00 class-ID: ff00 IF: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 10.100.X.X/24 type: dynamic noprefixroute scope: global broadcast: 10.100.X.X IP v6: fe80::364f:9d93:c35f:ad69/64 scope: link WAN IP: 108.172.X.X Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:3f201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: XX:XX:XX:XX:XX:XX bt-v: 2.1 lmp-v: 4.1 sub-v: 2209 hci-v: 4.1 rev: 1fc Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 59.48 GiB used: 1.48 GiB (2.5%) ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: SanDisk model: SC64G size: 59.48 GiB block-size: physical: 512 B logical: 512 B type: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. Message: No optical or floppy data found. Partition: ID-1: / raw-size: 59.22 GiB size: 58.27 GiB (98.38%) used: 1.44 GiB (2.5%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs uuid: 64bc182a-ca9d-4aa1-8936-d2919863c22a ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 49.1 MiB (19.5%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: 5484-8F96 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: Microchip (formerly SMSC) SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 0424:9514 class-ID: 0900 Device-1: 1-1.1:3 info: Microchip (formerly SMSC) SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 0424:ec00 class-ID: ff00 Device-2: 1-1.4:4 info: Holtek USB Keyboard type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s power: 100mA chip-ID: 04d9:1605 class-ID: 0300 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 576 lib: 312 Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ bullseye main Processes: CPU top: 5 of 134 1: cpu: 11.5% command: init pid: 1 mem: 8.41 MiB (0.9%) 2: cpu: 2.7% command: systemd-udevd pid: 156 mem: 4.54 MiB (0.4%) 3: cpu: 1.5% command: systemd-journald pid: 134 mem: 7.72 MiB (0.8%) 4: cpu: 1.4% command: login pid: 495 mem: 3.64 MiB (0.3%) 5: cpu: 1.2% command: systemd pid: 643 mem: 7.02 MiB (0.7%) Memory top: 5 of 134 1: mem: 9.63 MiB (1.0%) command: udisksd pid: 444 cpu: 0.9% 2: mem: 8.41 MiB (0.9%) command: init pid: 1 cpu: 11.5% 3: mem: 7.75 MiB (0.8%) command: bluetoothd pid: 548 cpu: 0.1% 4: mem: 7.72 MiB (0.8%) command: systemd-journald pid: 134 cpu: 1.5% 5: mem: 7.02 MiB (0.7%) command: systemd pid: 643 cpu: 1.2% Info: Processes: 134 Uptime: 1m Init: systemd v: 247 runlevel: 5 tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Shell: Bash (sudo) v: 5.1.4 running-in: tty 1 inxi: 3.3.14

inxi Results

System:
  Host: raspberrypi Kernel: 5.10.92-v7+ arch: armv7l bits: 32 compiler: N/A
    parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0
    snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 vc_mem.mem_base=0x3ec00000
    vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=77fca2f2-02
    rootfstype=ext4 fsck.repair=yes rootwait
  Console: tty 1 Distro: Raspbian GNU/Linux 11 (bullseye)
Machine:
  Type: ARM System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a22082
    Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 998.8 MiB used: 195.5 MiB (19.6%) gpu: 76 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: 0
    stepping: 4
  Topology: cpus: 1x cores: 4 smt: N/A cache: N/A
  Speed (MHz): avg: 1200 min/max: 600/1200 scaling: driver: cpufreq-dt governor: ondemand
    cores: 1: 1200 2: 1200 3: 1200 4: 1200 bogomips: 307
  Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3
  vfpv4
  Vulnerabilities: No CPU vulnerability/bugs data available.
Graphics:
  Device-1: bcm2835-hdmi driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:3f902000
    class-ID: hdmi
  Device-2: bcm2835-vc4 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: gpu
  Display: server: No display server data found. Headless machine? tty: 240x67
  Monitor-1: HDMI-A-1 model: HP 24es built: 2018 res: 1920x1080 dpi: 93
    gamma: 1.2 chroma: red: x: 0.651 y: 0.337 green: x: 0.322 y: 0.612 blue: x: 0.153 y: 0.059
    white: x: 0.314 y: 0.329 size: 527x296mm (20.75x11.65") diag: 604mm (23.8") ratio: 16:9
    modes: 1920x1080, 1680x1050, 1600x900, 1280x1024, 1440x900, 1280x800, 1280x720, 1024x768,
    800x600, 720x576, 720x480, 640x480, 720x400
  Message: Unable to show GL data. Required tool glxinfo missing.
Audio:
  Device-1: bcm2835-hdmi driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:3f902000 class-ID: hdmi
  Device-2: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio
    class-ID: bcm2835_audio
  Sound Server-1: ALSA v: k5.10.92-v7+ running: yes
Network:
  Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:3f300000
    class-ID: mmcnr
  IF: wlan0 state: down mac: XX:XX:XX:XX:XX:XX
  Device-2: Microchip (formerly SMSC) SMSC9512/9514 Fast Ethernet Adapter type: USB
    driver: smsc95xx bus-ID: 1-1.1:3 chip-ID: 0424:ec00 class-ID: ff00
  IF: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IP v4: 10.100.X.X/24 type: dynamic noprefixroute scope: global broadcast: 10.100.X.X
  IP v6: fe80::364f:9d93:c35f:ad69/64 scope: link
  WAN IP: 108.172.X.X
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:3f201000 class-ID: serial
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address: XX:XX:XX:XX:XX:XX bt-v: 2.1
    lmp-v: 4.1 sub-v: 2209 hci-v: 4.1 rev: 1fc
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 59.48 GiB used: 1.48 GiB (2.5%)
  ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: SanDisk model: SC64G size: 59.48 GiB block-size:
    physical: 512 B logical: 512 B type: SSD scheme: MBR
  SMART Message: Unknown smartctl error. Unable to generate data.
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 59.22 GiB size: 58.27 GiB (98.38%) used: 1.44 GiB (2.5%) fs: ext4
    block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs
    uuid: 64bc182a-ca9d-4aa1-8936-d2919863c22a
  ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 49.1 MiB (19.5%) fs: vfat
    block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: 5484-8F96
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
  ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: Microchip (formerly SMSC) SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s
    power: 2mA chip-ID: 0424:9514 class-ID: 0900
  Device-1: 1-1.1:3 info: Microchip (formerly SMSC) SMSC9512/9514 Fast Ethernet Adapter
    type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 2mA
    chip-ID: 0424:ec00 class-ID: ff00
  Device-2: 1-1.4:4 info: Holtek USB Keyboard type: Keyboard,HID driver: hid-generic,usbhid
    interfaces: 2 rev: 1.1 speed: 1.5 Mb/s power: 100mA chip-ID: 04d9:1605 class-ID: 0300
Sensors:
  Missing: Required tool sensors not installed. Check --recommends
Repos:
  Packages: apt: 576 lib: 312
  Active apt repos in: /etc/apt/sources.list
    1: deb http://raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-free rpi
  Active apt repos in: /etc/apt/sources.list.d/raspi.list
    1: deb http://archive.raspberrypi.org/debian/ bullseye main
Processes:
  CPU top: 5 of 134
  1: cpu: 11.5% command: init pid: 1 mem: 8.41 MiB (0.9%)
  2: cpu: 2.7% command: systemd-udevd pid: 156 mem: 4.54 MiB (0.4%)
  3: cpu: 1.5% command: systemd-journald pid: 134 mem: 7.72 MiB (0.8%)
  4: cpu: 1.4% command: login pid: 495 mem: 3.64 MiB (0.3%)
  5: cpu: 1.2% command: systemd pid: 643 mem: 7.02 MiB (0.7%)
  Memory top: 5 of 134
  1: mem: 9.63 MiB (1.0%) command: udisksd pid: 444 cpu: 0.9%
  2: mem: 8.41 MiB (0.9%) command: init pid: 1 cpu: 11.5%
  3: mem: 7.75 MiB (0.8%) command: bluetoothd pid: 548 cpu: 0.1%
  4: mem: 7.72 MiB (0.8%) command: systemd-journald pid: 134 cpu: 1.5%
  5: mem: 7.02 MiB (0.7%) command: systemd pid: 643 cpu: 1.2%
Info:
  Processes: 134 Uptime: 1m Init: systemd v: 247 runlevel: 5 tool: systemctl Compilers:
  gcc: 10.2.1 alt: 10 Shell: Bash (sudo) v: 5.1.4 running-in: tty 1 inxi: 3.3.14

Benchmark #58308 - Brand: SanDisk SD Ultra A1 (SC64G)